CA I'm Down...Kick me - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

FLEET72 · 08-24-2012, 04:17 PM

Hi Ray, if you still have them, 2 driver side and 1 passenger window regulators. Also interested in a clutch rod and Z-bar assembly shown in 2nd pic.
shipping to 95452.

Thanks, Oscar

**botmfedr1** · 08-24-2012, 05:31 PM

Quote:

Originally Posted by KrazyRay

Mondo, I don't know for sure, but the 71-72 rear ends are used all the time for those trucks. $10 for the bar and $11 for shipping...$21 shipped.
Thanks,
Ray

Apparently the stabilizer arms are different. It didn't work...the one I got from you was shorter and not as thick...oh well.
Posted via Mobile Device

KrazyRay · 08-24-2012, 06:23 PM

Oscar...$38 shipped for everything.

Mondo...Sorry it didn't work. Maybe they use an adjustable bar for a 72 rear end in an earlier truck?

FLEET72 · 08-25-2012, 05:48 AM

Quote:

Originally Posted by KrazyRay

Oscar...$38 shipped for everything.

I'll take 'em, PM sent.

**ScottH** · 08-28-2012, 07:23 PM

Ray, do u have any more clutch rods left?
Also would u have the part that bolts onto a sbc that the zbar swings on?
Not sure if the one that came on my truck is correct, its just the ball that screws into the block. Seems like it should be different to get the proper angle.

Thanks
Scott

KrazyRay · 08-28-2012, 11:27 PM

Scott, I have some remaining, but all have some wear. $5 plus shipping. Sorry, no part that screws to block.
Thanks,
Ray

KrazyRay · 08-31-2012, 10:37 AM

Scott, Its $21 shipped for the rod and 2 wiper blades.
Thanks,
Ray

shawno72 · 08-31-2012, 10:45 AM

Hey Ray do you have any more of that style wiper blade?

**ScottH** · 08-31-2012, 12:12 PM

Ray, thanks for the pics and info.
Give me a day or two to check on what I have, will let u know.

Scott

El Campo · 08-31-2012, 01:47 PM

Ray the taillight housings and reverse light housings were AMAZING. A super deal and I appreciate you. Do you happen to still have a set of outer door handles for 72? And how about a set of inner window and door handles (the silver ones)? Thanks!

KrazyRay · 08-31-2012, 04:36 PM

Shawn...Yes

Scott...Take your time. No hurry on my end.

El Campo...I'll check.

Thanks,
Ray

shawno72 · 08-31-2012, 05:15 PM

Quote:

Originally Posted by KrazyRay

Shawn...Yes

How much for a nice set?

KrazyRay · 09-03-2012, 12:25 AM

El Campo...These have heavy wear...daily drivers. $21 shipped for all. see pic

Shawn...$5pr. one wiper has a wrinkle that you might be able to straighten.

1971short4X4 · 09-03-2012, 12:38 AM

Ray
Looking for a verv nice set of backup light housings. CAn you help?
Posted via Mobile Device

El Campo · 09-03-2012, 07:53 AM

He might have already sold them all to me! If he can't help you out hit me up as Ray sold me a bunch of awesome ones and I'll hook you up. ONLY if he can't help you out, do not want to steal his business as he is a good man.

Ray let me think about it and check sonething out in my end. I'll prob take u up on the handles but I have to check something out .
Posted via Mobile Device

shawno72 · 09-03-2012, 12:17 PM

Quote:

Originally Posted by KrazyRay

Shawn...$5pr. one wiper has a wrinkle that you might be able to straighten.

I'll take them Ray with the black visors. Thank you.
Posted via Mobile Device

KrazyRay · 09-03-2012, 10:19 PM

Tom...Here's a nice rust free pair. $13 total shipped.

El Campo...Thanks for the kind words.

Shawn...I hope to roll through Lodi this weekend.

Thanks,
Ray

1971short4X4 · 09-03-2012, 11:13 PM

Ray
Thanks. Do you have a set with the wires intact? Or do you have the wires seperate? (can they be changed?)
Thanks for the help
Posted via Mobile Device

widewhite70 · 09-03-2012, 11:24 PM

Do you happen to have any chrome vent windows left?

KrazyRay · 09-04-2012, 10:51 AM

Tom...I have a set with wires, but they have a couple spots of light surface rust. Same price.

widewhite...Yes, I have a set that will make a very nice daily driver. Great chrome, a couple of very small dings.

Thanks,
Ray

shawno72 · 09-04-2012, 11:02 AM

Quote:

Originally Posted by KrazyRay

Shawn...I hope to roll through Lodi this weekend.

Thanks,
Ray

I'll be here at work, see you then. Thanks Ray.

**cericd** · 09-04-2012, 11:10 AM

Do you have a nice (no pitting) passenger side outside door handle for a 1970 C10? Also, any window cranks (chrome with black handles) that aren't pitted? Thanks.

KrazyRay · 09-04-2012, 09:29 PM

Sorry, all of my handles are driver condition with pitting.

**RPIcka** · 09-04-2012, 11:37 PM

any news on the vent windows? I'm interested if they havent been sold.

widewhite70 · 09-06-2012, 10:37 PM

Quote:

Originally Posted by KrazyRay

Tom...I have a set with wires, but they have a couple spots of light surface rust. Same price.

widewhite...Yes, I have a set that will make a very nice daily driver. Great chrome, a couple of very small dings.

Thanks,
Ray

Awesome thanks! I messaged you.

08-24-2012, 04:17 PM	#101
FLEET72 Registered User Join Date: Jan 2007 Location: Sonoma, CA Posts: 521	Re: I'm Down...Kick me Hi Ray, if you still have them, 2 driver side and 1 passenger window regulators. Also interested in a clutch rod and Z-bar assembly shown in 2nd pic. shipping to 95452. Thanks, Oscar __________________ Oscar '72 Shortbed Fleetside '95 Jimmy 4X4 '69 GMC Custom Camper

08-24-2012, 06:23 PM	#103
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: I'm Down...Kick me Oscar...$38 shipped for everything. Mondo...Sorry it didn't work. Maybe they use an adjustable bar for a 72 rear end in an earlier truck?

08-28-2012, 07:23 PM	#105
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: I'm Down...Kick me Ray, do u have any more clutch rods left? Also would u have the part that bolts onto a sbc that the zbar swings on? Not sure if the one that came on my truck is correct, its just the ball that screws into the block. Seems like it should be different to get the proper angle. Thanks Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-28-2012, 11:27 PM	#106
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: I'm Down...Kick me Scott, I have some remaining, but all have some wear. $5 plus shipping. Sorry, no part that screws to block. Thanks, Ray

08-31-2012, 10:37 AM	#107
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: I'm Down...Kick me Scott, Its $21 shipped for the rod and 2 wiper blades. Thanks, Ray Attached Images

08-31-2012, 10:45 AM	#108
shawno72 C/10 junkie Join Date: Nov 2010 Location: Stockton Ca Posts: 9,093	Re: I'm Down...Kick me Hey Ray do you have any more of that style wiper blade? __________________ Shawn 70 LWB C10 current driver/project http://67-72chevytrucks.com/vboard/s...d.php?t=663051 68 SWB C10 Work in progress.....SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=559520 72 LWB C10 Sold 71 LWB C10 Sold 68 LWB C10 CST Sold http://youtu.be/kbB0QrBIs9k My mom always had the best advice. It was just a tad late. After a fall that involved blood, she'd say....."Careful!"

08-31-2012, 12:12 PM	#109
ScottH Senior Member Join Date: Sep 2002 Location: Hampstead, NC Posts: 8,187	Re: I'm Down...Kick me Ray, thanks for the pics and info. Give me a day or two to check on what I have, will let u know. Scott __________________ 1963 C10 swb fleetside 1966 GMC G1000 Handi-bus (future project) 1955 Chevy 2 dr. wagon

08-31-2012, 01:47 PM	#110
El Campo Registered User Join Date: Jul 2011 Location: El Campo, Tx Posts: 1,246	Re: I'm Down...Kick me Ray the taillight housings and reverse light housings were AMAZING. A super deal and I appreciate you. Do you happen to still have a set of outer door handles for 72? And how about a set of inner window and door handles (the silver ones)? Thanks! __________________ 72 Chevy blue LWB, 99% original Oklahoma truck, 28,000 miles 72 Chevy SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=486626 (Attempt/Mistake #2) 2003 Harley Davidson Dyna Superglide with 2007 Street Bob front end 2000 Ford F350 Powerstroke 4WD CCLB, 310,000 miles running great (STOLEN St. Patricks Day 2014 AND NEVER RECOVERED) 2002 Ford F250 Powerstroke 4WD CCLB (To replace stolen one) Hook em Horns!!!

08-31-2012, 04:36 PM	#111
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: I'm Down...Kick me Shawn...Yes Scott...Take your time. No hurry on my end. El Campo...I'll check. Thanks, Ray

09-03-2012, 12:25 AM	#113
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: I'm Down...Kick me El Campo...These have heavy wear...daily drivers. $21 shipped for all. see pic Shawn...$5pr. one wiper has a wrinkle that you might be able to straighten. Attached Images

09-03-2012, 12:38 AM	#114
1971short4X4 Registered User Join Date: Nov 2001 Location: Mission Viejo, Ca Posts: 377	Re: I'm Down...Kick me Ray Looking for a verv nice set of backup light housings. CAn you help? Posted via Mobile Device

09-03-2012, 07:53 AM	#115
El Campo Registered User Join Date: Jul 2011 Location: El Campo, Tx Posts: 1,246	Re: I'm Down...Kick me He might have already sold them all to me! If he can't help you out hit me up as Ray sold me a bunch of awesome ones and I'll hook you up. ONLY if he can't help you out, do not want to steal his business as he is a good man. Ray let me think about it and check sonething out in my end. I'll prob take u up on the handles but I have to check something out . Posted via Mobile Device __________________ 72 Chevy blue LWB, 99% original Oklahoma truck, 28,000 miles 72 Chevy SWB: http://67-72chevytrucks.com/vboard/s...d.php?t=486626 (Attempt/Mistake #2) 2003 Harley Davidson Dyna Superglide with 2007 Street Bob front end 2000 Ford F350 Powerstroke 4WD CCLB, 310,000 miles running great (STOLEN St. Patricks Day 2014 AND NEVER RECOVERED) 2002 Ford F250 Powerstroke 4WD CCLB (To replace stolen one) Hook em Horns!!!

09-03-2012, 10:19 PM	#117
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: I'm Down...Kick me Tom...Here's a nice rust free pair. $13 total shipped. El Campo...Thanks for the kind words. Shawn...I hope to roll through Lodi this weekend. Thanks, Ray Attached Images

09-03-2012, 11:13 PM	#118
1971short4X4 Registered User Join Date: Nov 2001 Location: Mission Viejo, Ca Posts: 377	Re: I'm Down...Kick me Ray Thanks. Do you have a set with the wires intact? Or do you have the wires seperate? (can they be changed?) Thanks for the help Posted via Mobile Device

09-03-2012, 11:24 PM	#119
widewhite70 Registered User Join Date: Apr 2010 Location: Coshocton,Ohio Posts: 834	Re: I'm Down...Kick me Do you happen to have any chrome vent windows left? __________________ -Calvin http://67-72chevytrucks.com/vboard/s...d.php?t=512270 my build, tube chassis and LS2 How I keep the truck shining, Detail thread: http://67-72chevytrucks.com/vboard/s...d.php?t=697902



Register or Log In To remove these advertisements.

09-04-2012, 10:51 AM	#120
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: I'm Down...Kick me Tom...I have a set with wires, but they have a couple spots of light surface rust. Same price. widewhite...Yes, I have a set that will make a very nice daily driver. Great chrome, a couple of very small dings. Thanks, Ray

09-04-2012, 11:10 AM	#122
cericd Senior Member Join Date: Jan 2012 Location: Texan, back in TX Posts: 2,105	Re: I'm Down...Kick me Do you have a nice (no pitting) passenger side outside door handle for a 1970 C10? Also, any window cranks (chrome with black handles) that aren't pitted? Thanks.

09-04-2012, 09:29 PM	#123
KrazyRay Registered User Join Date: Jun 2009 Location: Oroville, CA Posts: 4,827	Re: I'm Down...Kick me Sorry, all of my handles are driver condition with pitting. Attached Images

09-04-2012, 11:37 PM	#124
RPIcka Senior Member Join Date: Aug 2011 Location: Powell River, BC Posts: 229	Re: I'm Down...Kick me any news on the vent windows? I'm interested if they havent been sold.

Register or Log In To remove these advertisements.