KS 67-72 Parts left from the May 2014 swap meet - Page 5 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**c10-72 II** · 05-12-2014, 08:15 PM

In Lot 13 you have a 71-72 grill assembly outer and inner. How much shipped to 60007 Il? And also how's the front bumper?

Dons72cheyennesuper · 05-12-2014, 09:59 PM

Hello, I need a letter "E" for the tailgate band, I see you have some in picture #73. Shipped to brookfield, ohio 44403, thanx!

p.s. how does a guy reattach these?

teeitup · 05-13-2014, 07:39 AM

Rusty, info sent

Mrjuicie35, I will get pics, shipping is high on these

sambudo, I only have one side 67-71 window regulator, I'll look and see which side I have. The grommets are all cracked on door panels, door panels are $20 for pair. I should have the screws out there

C10-72 II, sorry I don't ship grills. Bumper is driver quality

Dons, I'll see what I have, gorillla glue is about the only way to reattach

Thanks Randy

dmartin1 · 05-13-2014, 11:20 AM

hey man, wiring harness for an automatic, ac truck with gauges in decent/good condition? got one and price?

also, any decent condition 1/2 ton 69-72 core support mounts/hardware? lookin for some cheapies to throw on it just for now. thanks man! lemme know

sambudo · 05-13-2014, 11:59 AM

Quote:

Originally Posted by teeitup

Rusty, info sent

sambudo, I only have one side 67-71 window regulator, I'll look and see which side I have. The grommets are all cracked on door panels, door panels are $20 for pair. I should have the screws out there

Thanks Randy

Randy, I need the driver side regulator more than the passenger. Thanks for looking. Scott

teeitup · 05-14-2014, 06:52 AM

dmartin1, I have a harness out there, pics tonight. Sorry no bushings

Scott, never had time Tues night to look, I will tonight

Thanks Randy

Motoxrrar · 05-14-2014, 08:27 AM

So I need a bumper bracket that fits a 72 gmc 2wd with power steering, for the drivers side. I Have bought a few bumper brackets and have had trouble getting one to fit. Might you have the correct bracket?

Mrjuicie35 · 05-14-2014, 10:40 AM

Interested in the rad support too thank u

sambudo · 05-14-2014, 10:50 AM

Quote:

Originally Posted by teeitup

dmartin1, I have a harness out there, pics tonight. Sorry no bushings

Scott, never had time Tues night to look, I will tonight

Thanks Randy

Thank you sir!

scrappy70 · 05-14-2014, 06:04 PM

How much for a set of valve covers to a 350 and shipping?

69SCSS · 05-14-2014, 09:18 PM

Hey Randy, you wouldn't happen to have a 67-68 non-gauge bezel? Doesn't matter if it's faded, just not cracked. They don't make repros for those, only the 69-72.
Thanks, Al

**TBONE1964** · 05-14-2014, 09:29 PM

Quote:

Originally Posted by 69SCSS

Hey Randy, you wouldn't happen to have a 67-68 non-gauge bezel? Doesn't matter if it's faded, just not cracked. They don't make repros for those, only the 69-72.
Thanks, Al

I don't mean to butt in here but if Randy cannot help you, I might have a couple in my inventory. I think I may have a nice one but it was from a speed warning cluster so it has the small hole for the cable.

I will not be able to let you know until the 29th of the month as I am out of town currently.

Thank you,
Tom

teeitup · 05-14-2014, 09:54 PM

Dons72, sorry forgot to look, I will Thurs night for sure

dmartin1, the ones I have are bad, I just hauled in a 72 tonight, I will check it out

sambudo, only have a pass side reg

Motoxrrar, sorry only have a pass side one

Mrjuicie35, I have pics will post Thurs morning, shipping will be $80-100 atleast

scrappy70, $18 plus shipping for a pair

Al, sorry none right now

Tom, no worries hope you can help him, also your gauges went out today Fed Ex

Thanks Randy

69SCSS · 05-14-2014, 10:04 PM

Quote:

Originally Posted by teeitup

Al, sorry none right now

Thanks Randy

No problem Randy.

Tom, what would you want for one? I'm not in a hurry so the end of the month is fine with me.

Thanks, Al

**TBONE1964** · 05-14-2014, 11:11 PM

Quote:

Originally Posted by 69SCSS

No problem Randy.

Tom, what would you want for one? I'm not in a hurry so the end of the month is fine with me.

Thanks, Al

Thank you Randy.

Al,

Let me get back to Michigan and I will see what I have. If I have one you can use, its on me just cover the shipping. 67/68 style without gauges, correct?

Shoot me a reminder or PM at the end of the month.

Take care,
Tom

69SCSS · 05-14-2014, 11:15 PM

Quote:

Originally Posted by TBONE1964

Thank you Randy.

Al,

Let me get back to Michigan and I will see what I have. If I have one you can use, its on me just cover the shipping. 67/68 style without gauges, correct?

Shoot me a reminder or PM at the end of the month.

Take care,
Tom

Sounds good. Will do. Thanks again!

teeitup · 05-15-2014, 07:23 AM

rad support

teeitup · 05-15-2014, 07:23 AM

door panels

ECU PIRATE · 05-15-2014, 10:06 AM

Randy,

IN post # 63, you have the complete clutch linkage (bell crank,pushrod, springs). How much shipped to my business address of 22151.

Thanks,

Mike

Bears63 · 05-15-2014, 10:37 AM

Would you happen to have any drive shafts? I am looking for the front drive shaft for a '71 C10 Longbox with a Th350. I will have to get the measurement but I thought I would ask in the meantime.

scrappy70 · 05-15-2014, 01:24 PM

Awesome, I will take the pair of valve covers. Are they straight or pretty close to it? I'm assuming you use PayPal? Also, the zip code is 95835 if you can give me total price.

Mrjuicie35 · 05-15-2014, 02:36 PM

How much for rad support and shipping to 18052

teeitup · 05-15-2014, 09:15 PM

ECU Pirate, $25 plus shipping for setup

Bears63, I have the one out of a 72 3/4 with th350

scrappy70, they are good shape, I'll get quote Fri night

Mrjuicie35, I'll get quote

Thanks Randy

Bears63 · 05-16-2014, 09:23 AM

Randy, do you have the measurement of the front section of the driveshaft? Mine is 35 1/4" (thereabouts. What is the price and shipping to 57201?

waylonbud · 05-16-2014, 11:12 PM

Hi Randy,
Received parts today and look good.
Thank you, Waylon.

05-12-2014, 08:15 PM	#101
c10-72 II Active Member Join Date: Sep 2013 Location: Elk Grove Village IL Posts: 152	Re: 67-72 Parts left from the May 2014 swap meet In Lot 13 you have a 71-72 grill assembly outer and inner. How much shipped to 60007 Il? And also how's the front bumper?

05-12-2014, 09:59 PM	#102
Dons72cheyennesuper Registered User Join Date: Jul 2011 Location: Brookfield, Ohio Posts: 18	Re: 67-72 Parts left from the May 2014 swap meet Hello, I need a letter "E" for the tailgate band, I see you have some in picture #73. Shipped to brookfield, ohio 44403, thanx! p.s. how does a guy reattach these?

05-13-2014, 07:39 AM	#103
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 Parts left from the May 2014 swap meet Rusty, info sent Mrjuicie35, I will get pics, shipping is high on these sambudo, I only have one side 67-71 window regulator, I'll look and see which side I have. The grommets are all cracked on door panels, door panels are $20 for pair. I should have the screws out there C10-72 II, sorry I don't ship grills. Bumper is driver quality Dons, I'll see what I have, gorillla glue is about the only way to reattach Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-13-2014, 11:20 AM	#104
dmartin1 Registered User Join Date: Aug 2008 Location: mohave valley,arizona Posts: 1,088	Re: 67-72 Parts left from the May 2014 swap meet hey man, wiring harness for an automatic, ac truck with gauges in decent/good condition? got one and price? also, any decent condition 1/2 ton 69-72 core support mounts/hardware? lookin for some cheapies to throw on it just for now. thanks man! lemme know __________________ 1969 Shortbed in progress 1982 short step, few suspension and motor upgrades.getting a 468 1978 Shortbed fleet side bonanza fully loaded 1978 k20 Silverado loaded.currently engine-less 1989 k10 suburban 9" lift 65 nova And more

05-14-2014, 06:52 AM	#106
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 Parts left from the May 2014 swap meet dmartin1, I have a harness out there, pics tonight. Sorry no bushings Scott, never had time Tues night to look, I will tonight Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-14-2014, 08:27 AM	#107
Motoxrrar Registered User Join Date: Feb 2014 Location: Tennessee Posts: 282	Re: 67-72 Parts left from the May 2014 swap meet So I need a bumper bracket that fits a 72 gmc 2wd with power steering, for the drivers side. I Have bought a few bumper brackets and have had trouble getting one to fit. Might you have the correct bracket?

05-14-2014, 10:40 AM	#108
Mrjuicie35 Registered User Join Date: May 2014 Location: Whitehall, pa Posts: 24	Re: 67-72 Parts left from the May 2014 swap meet Interested in the rad support too thank u

05-14-2014, 06:04 PM	#110
scrappy70 Registered User Join Date: Jun 2012 Location: Sacramento, Ca Posts: 69	Re: 67-72 Parts left from the May 2014 swap meet How much for a set of valve covers to a 350 and shipping?

05-14-2014, 09:18 PM	#111
69SCSS Registered User Join Date: Aug 2012 Location: Neskowin OR Posts: 1,153	Re: 67-72 Parts left from the May 2014 swap meet Hey Randy, you wouldn't happen to have a 67-68 non-gauge bezel? Doesn't matter if it's faded, just not cracked. They don't make repros for those, only the 69-72. Thanks, Al __________________ My 68 SWB Al Silveira Music <- My daughter loves this guy 8-)

05-14-2014, 09:54 PM	#113
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 Parts left from the May 2014 swap meet Dons72, sorry forgot to look, I will Thurs night for sure dmartin1, the ones I have are bad, I just hauled in a 72 tonight, I will check it out sambudo, only have a pass side reg Motoxrrar, sorry only have a pass side one Mrjuicie35, I have pics will post Thurs morning, shipping will be $80-100 atleast scrappy70, $18 plus shipping for a pair Al, sorry none right now Tom, no worries hope you can help him, also your gauges went out today Fed Ex Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-15-2014, 07:23 AM	#117
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 Parts left from the May 2014 swap meet rad support Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-15-2014, 07:23 AM	#118
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 Parts left from the May 2014 swap meet door panels Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-15-2014, 10:06 AM	#119
ECU PIRATE Registered User Join Date: Apr 2009 Location: Centreville, Virginia Posts: 846	Re: 67-72 Parts left from the May 2014 swap meet Randy, IN post # 63, you have the complete clutch linkage (bell crank,pushrod, springs). How much shipped to my business address of 22151. Thanks, Mike __________________ The Fleet........ 68' Camaro - 1st car (restored & still have it) 09' VW Tiguan (Wife's Daily Driver) 14' VW Passat SE TSI (my personal) 14' Ford Edge Sport (Daily Work Vehicle) 73' SWB Stepside - 77K org. miles 74' LWB 454/TH400 - drive train transplant for my (Sold) 98' SWB C1500 W/T - shop truck (Sold) 90' GMC Sierra SLE short step - aka " Jezabelle " (Sold)

05-15-2014, 10:37 AM	#120
Bears63 ...just another truck junkie.. Join Date: May 2009 Location: Watertown, SD Posts: 698	Re: 67-72 Parts left from the May 2014 swap meet Would you happen to have any drive shafts? I am looking for the front drive shaft for a '71 C10 Longbox with a Th350. I will have to get the measurement but I thought I would ask in the meantime. __________________ Mike "Bear" Shea

05-15-2014, 01:24 PM	#121
scrappy70 Registered User Join Date: Jun 2012 Location: Sacramento, Ca Posts: 69	Re: 67-72 Parts left from the May 2014 swap meet Awesome, I will take the pair of valve covers. Are they straight or pretty close to it? I'm assuming you use PayPal? Also, the zip code is 95835 if you can give me total price.



Register or Log In To remove these advertisements.

05-15-2014, 02:36 PM	#122
Mrjuicie35 Registered User Join Date: May 2014 Location: Whitehall, pa Posts: 24	Re: 67-72 Parts left from the May 2014 swap meet How much for rad support and shipping to 18052

05-15-2014, 09:15 PM	#123
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: 67-72 Parts left from the May 2014 swap meet ECU Pirate, $25 plus shipping for setup Bears63, I have the one out of a 72 3/4 with th350 scrappy70, they are good shape, I'll get quote Fri night Mrjuicie35, I'll get quote Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

05-16-2014, 09:23 AM	#124
Bears63 ...just another truck junkie.. Join Date: May 2009 Location: Watertown, SD Posts: 698	Re: 67-72 Parts left from the May 2014 swap meet Randy, do you have the measurement of the front section of the driveshaft? Mine is 35 1/4" (thereabouts. What is the price and shipping to 57201? __________________ Mike "Bear" Shea

05-16-2014, 11:12 PM	#125
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: 67-72 Parts left from the May 2014 swap meet Hi Randy, Received parts today and look good. Thank you, Waylon.

Register or Log In To remove these advertisements.