|
|
|
09-27-2017, 07:39 PM
|
#1 |
|
Registered User
Join Date: Sep 2017
Location: Union grove, WI
Posts: 9
|
Re: LSX swappers what ya got?!?!
Model: 1962 c10 stepper
Motor/transmission: 2004 4.8/2001 s10 nv3500 Fuel tank: Stock Motor mounts: Ebay modified Tranny mount: Home Made Oil pan: Stock Radiator: Speedway Shift linkage: Exhaust manifolds: Speed Eng. C10 Gears: 3.90 Rear End: Stock Tire size: 235/75R15 Bagged: no Running: Yes Build thread: Carb or FI: FI Go Fast: |
|
|
|
10-05-2017, 02:03 PM
|
#2 |
|
Registered User
Join Date: Jan 2016
Location: Casper, WY
Posts: 9
|
Re: LSX swappers what ya got?!?!
Model: 1949 3600 Pickup
Motor/transmission: 1999 Silverado 5.3 Fuel tank: 1997 S10 Motor mounts: Dave's Offroad Unlimited and fabricated Tranny mount: Modified S10 crossmember stock mount Oil pan: stock silverado Radiator: 19 x 22 aluminum 2 pass. reconfigured outlet and steam port Shift linkage: Ididit cable conversion Exhaust manifolds: Drivers Late Camaro, Pass Silverado Gears: 3.42 Open Rear End: 1997 S10 2WD Tire size: 215/70/15 Bagged: Static Dropped spindles Running: Yes, 1160 miles 3 shows Build thread: No Carb or FI: EFI LT1swap.com reflashed ecm Go Fast:In the works!! It was originally my Grandfather's work truck. It has been a blast to build and drive. |
|
|
|
|
12-07-2017, 03:15 PM
|
#3 |
|
Registered User
Join Date: Jul 2017
Location: Lebanon, Oregon
Posts: 241
|
Re: LSX swappers what ya got?!?!
Model: 1953 3100
Motor: 2002 5.3 Flex Transmission: Muncie M20 Oil pan: Truck Motor mounts: Custom Tranny mount: Custom Tranny Tunnel: Slight hump Radiator: Griffin Aluminum Pro Series Radiators 1-25182-X Fuel tank: Stock in cab Shift linkage: Hurst Exhaust manifolds: 1982-04 Chevrolet S10 Blazer LS1 Sonoma Engine Swap Headers Stainless by Racing Innovation Supply Gears: 2.29 (will go 3.73) Tire size: 29" Carb or EFI: EFI Bagged: No Running: Soon. ish. Go Fast: Right foot
__________________
It was said that if you cut off one hydra head, two more grow back. -Lernaean Hydra Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=743246 Last edited by robertsjm711; 12-07-2017 at 03:21 PM. |
|
|
|
|
05-12-2018, 10:51 AM
|
#4 |
|
Registered User
 Join Date: Nov 2017
Location: stafford, new york
Posts: 9
|
Re: LSX swappers what ya got?!?!
Model: 69 c10 CST
Motor/transmission: 2000 4.8/4l60e Fuel tank: universal by tanks Motor mounts: dirty dingus with stock Tranny mount: stock Oil pan: 4..8 stock Radiator: 69 stock Shift linkage: lokar Exhaust manifolds: speed engineering Gears: 3:73 Rear End: 69 12 bolt eaton Tire size: 275/60-15 Bagged: no Running: yes but not moving yet Build thread: Carb or FI: factory 00 FI Go Fast:not sure yet |
|
|
|
|
05-18-2018, 04:52 PM
|
#5 | |
|
Registered User
Join Date: Sep 2002
Location: Northern Colorado
Posts: 198
|
Re: LSX swappers what ya got?!?!
Quote:
|
|
|
|
|
|
06-27-2018, 07:35 PM
|
#6 |
|
Registered User
Join Date: Aug 2004
Location: Sacramento Ca
Posts: 126
|
Re: LSX swappers what ya got?!?!
Model: 1971 C20
Motor/transmission: 2006 6.0 4L80E Fuel tank: Stock Motor mounts: Ebay 5/16" thick Tranny mount: Stock 350 mount Oil pan: Stock truck pan Radiator: ... Shift linkage: ... Exhaust manifolds: LS 6.2 Camero Ceramic coated inside and out. Gears: 4:10 Rear End: Dana 60 Tire size: 245 75 16 Bagged: Leaf springs Running: ... Build thread: ... Carb or FI: Stock EFI Go Fast: Installing the 6.0 Torque management. LT1 swap tune |
|
|
|
|
10-10-2018, 01:47 PM
|
#7 |
|
Proud Vet that loves the USA
Join Date: Jun 2016
Location: Beebe, AR
Posts: 459
|
Re: LSX swappers what ya got?!?!
Model: 1986 Silverado
Motor/transmission: LS3 6.2/TR6060 Fuel tank: Rear mounted Boyd's tank with internal fuel pump Motor mounts: Home made Tranny mount: Hooker double hump cross member Oil pan: CTS-V Radiator: 2004 Silverado with 2007 Silverado cooling fans Shift linkage: MGW Short Throw Exhaust manifolds: Ebay stainless headers Gears: 3.42 Rear End: 12 bolt with Eaton Diff Tire size: Front 18x9 4.5bs-275/35/18 Rear 18x10 5bs 275/35/18 Ridetech front/rear coilovers susp/Wilwood front/rear brakes Running: Like a Beast Carb or FI: Ported LS3 intake Go Fast: Stage 3 GPI heads and cam Last edited by 1957 Chief; 10-10-2018 at 02:13 PM. |
|
|
|
|
10-10-2018, 02:30 PM
|
#8 |
|
Senior Member
Join Date: Jul 2009
Location: Hayden, Al.
Posts: 4,147
|
Re: LSX swappers what ya got?!?!
^^^ That’s dead SeXy!!! It’s what I’d like my 77 to end up like...
And, on another note... my mom’s entire family is from Beebe/Garner AR. Small world Last edited by nlped; 10-10-2018 at 03:11 PM. |
|
|
|
|
10-16-2018, 02:04 PM
|
#9 |
|
Senior Member
Join Date: Jan 2016
Location: Enumclaw WA
Posts: 267
|
Re: LSX swappers what ya got?!?!
Model: 1971 GMC Custom
Motor/transmission: 2006 Tahoe L59 5.3/4l60e Fuel tank: 1987 Blazer 25 gallon Motor mounts: DD sliders Tranny mount: Stock 350 mount Oil pan: Stock truck pan Radiator: American Eagle W/ Electric fans Shift linkage: Lokar Exhaust manifolds: 2012 Camaro Gears: 3:07 Rear End: 12 bolt Tire size: 235 75 15 Bagged: Leaf springs Running: yes Build thread: no Carb or FI: Stock EFI Go Fast: Not yet |
|
|
|
|
11-09-2018, 10:57 PM
|
#10 |
|
Registered User
Join Date: May 2009
Location: Central Valley,ca
Posts: 174
|
Re: LSX swappers what ya got?!?!
Model: 1967 C10 SBW,SWB fleetside
Motor/transmission: 480 horse LS3 with Tremec tko500 Fuel tank: Boyds welding tank Motor mounts: SBC+ ebay brackets with CPP stands Oil pan: Chevy performance Hot Rod Pan Radiator: Entropy with dual fans Shift linkage: mid shift with Lokar 16" curved shifter handle Exhaust manifolds: Doug Thorley 1 5/8th"s tri y headers Gears: 3.73 Rear End: Truck 12 bolt, 5lug Henry's Axles Tire size: Rear 265/70/15 on Halibrand style repros Bagged: no Running: not yet... Build thread: Carb or FI: FI with GM controller 
Last edited by the ideaman; 11-10-2018 at 08:09 AM. |
|
|
|
|
12-28-2018, 08:29 AM
|
#11 |
|
Registered User
Join Date: Dec 2018
Location: Houston Texas
Posts: 22
|
Re: LSX swappers what ya got?!?!
Posted via Mobile Device
|
|
|
|
|
01-12-2019, 02:47 PM
|
#12 |
|
Registered User
Join Date: Mar 2017
Location: Edmonton
Posts: 369
|
Re: LSX swappers what ya got?!?!
Model: 1965 c10
Motor/transmission: 2008 Ly6 6 litre /4l80 2500 stall, TSP cam etc Fuel tank: My own custom aluminum under bed Motor mounts: dirty dingo sliders with stock Tranny mount: CPP Oil pan: Gm performance muscle car pan Radiator: 65 stock Shift linkage: lokar Exhaust manifolds: speed engineering 1 7/8 long tube Gears: 3:07 for now going 3:73 and posi soon Rear End: 65 12 bolt Tire size: 275/50/20 235/50/18 Bagged: Rear bagged front drop spindle Running: yes Build thread: Carb or FI: factory Go Fast: |
|
|
|
|
01-22-2019, 05:45 PM
|
#13 |
|
Registered User
Join Date: Nov 2014
Location: lake george ny
Posts: 17
|
Re: LSX swappers what ya got?!?!
the truck in my profile pic was built by me in 2015, 2003 6.0 lq9 drive by cable, tied to a 700r4, ss gas tank between the frame rails, duals all the way to the bumper, daily driver. youtube page= Dennis Catlin
__________________
She is up and running- youtube Last edited by dcatlin; 01-22-2019 at 06:02 PM. Reason: add picture |
|
|
|
|
01-23-2019, 02:43 PM
|
#14 |
|
Registered User
Join Date: Nov 2017
Location: SLC Utah
Posts: 210
|
Re: LSX swappers what ya got?!?!
Model: 1970 K10
Motor: 2011 L96 w/VVT Transmission: 2011 6L90E Trans Case: NP 205 with Atlas Kit Oil pan: Stock Motor mounts: Dirty Dingo Tranny mount: TBD/Custom Fab Tranny Tunnel: High Hump Radiator: TBD Fuel tank: Boyds is the plan... Shift linkage: TBD Exhaust manifolds: Stock Gears: 4.10 Tire size: 35" Carb or EFI: EFI Bagged: can you call a 6" lift bagged? Running: not yet...deep in progress... Go Fast: Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=773647 |
|
|
|
|
01-26-2019, 02:33 AM
|
#15 |
|
Post Whore
 
Join Date: May 2015
Location: Alabama
Posts: 14,608
|
Re: LSX swappers what ya got?!?!
Model: 1981 c30
Motor/transmission: LQ9/NV4500 Fuel tank: stock Motor mounts: stock with ebay adapters Tranny mount: stock Oil pan: stock Radiator: stock Shift linkage: stock Exhaust manifolds: stainless headers Gears: .10 Rear End: 14bolt Tire size: 30" Bagged: no Running: yes Build thread:http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Carb or FI: FI Go Fast: it will
__________________
Mongo...aka Greg RIP Dad RIP Jesse 1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598 Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334 Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563 2023 Chevy Z71..daily driver |
|
|
|
|
12-07-2020, 04:22 PM
|
#16 |
|
Registered User
Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 963
|
Re: LSX swappers what ya got?!?!
Model: 1965 GMC short Fleetside
Motor/transmission: 2008 Gen IV LMG 5.3/4L60E Fuel tank: Tanks Inc USPT-GH Motor mounts: Blackheart Racing plates (3rd position forward) POL tubular mounts Tranny mount: aftermarket modified for exhaust Oil pan: Stock 5.3 pan Radiator: RND Fabrication (forum sponsor discount) Shift linkage: Art Carr Winters 177-1 Exhaust manifolds: Speed Engineering shorties Gears: Stock, 3.42 Rear End: Stock, 12 bolt 79C10 Lowered: 2 1/2" drop spindles, Jeep rear coils Running: tip top Build thread: yes Carb or FI: factory FI - internal Walbro, Corvette regulator, returnless fuel rail Wheels: 17 x 8, 4"bs, US Mags Ramblers 235-60-17 and 255-60-17 |
|
|
|
|
12-19-2021, 05:32 PM
|
#17 | |
|
Registered User
Join Date: Mar 2009
Location: Eagle Mountain Utah
Posts: 97
|
Re: LSX swappers what ya got?!?!
Quote:
Thanks ! |
|
|
|
|
|
12-20-2021, 12:13 AM
|
#18 | |
|
Registered User
Join Date: Oct 2014
Location: Brandon, Manitoba, Canada
Posts: 963
|
Re: LSX swappers what ya got?!?!
Quote:
For lower: Continental 61416 |
|
|
|
|
|
05-14-2022, 02:44 AM
|
#19 |
|
yes, i do
Join Date: Jun 2007
Location: Spokane, wa
Posts: 2,734
|
Re: LSX swappers what ya got?!?!
Model:91 v1500 suburban silverado
Motor/trans:2004 envoy lm4 aluminum 5.3/700r4 4x4 Tank  riginal with 96-97 cpfi fuel pumpMounts:ICT adapter plates/oem mounts Induction: oem from 2004 avalanch, 33lb/hr injectors from 01 tahoe Harness: 01 tahoe diy pin-out to stand-alone Ecu: blue/red from 99 silverado Exhaust manifolds: oem, unsure of year model Lifted: yes, 4 inch iirc, but done by last guy Tires: 33x12x15 Runs: yes, and moves under its own power
__________________
ERROR 404....... SNAPPY COMEBACK NOT FOUND  _______________________________________________________________________________________________ -60 Chevy C10, dead 350/good th350 combo, sitting on a 76 c10 blazer frame, built from 11 different vehicles "the abomination" -07 gmt900 silverado 1500 lt xcab z71, granite blue -81 suzuki gs650g "shelah"- current project -81 kz1000m1 csr "sarge" -next project (just beautification) -07 kawasaki vulcan classic vn900 |
|
|
|
|
12-15-2020, 09:39 PM
|
#20 |
|
Roto Reuter thats the name...
Join Date: Feb 2010
Location: Darien, NY
Posts: 1,853
|
Re: LSX swappers what ya got?!?!
Model: 1970 K10 swb fleetside
Motor: 2000 5.3L LM7 (Yukon) Transmission: 4L60E Level II rebuid from Bowtie Overdrives Oil pan: Tilden custom fabricated Motor mounts: Pacific Fabrication / Tilden Motorsports 4WD crossmember with motor mounts Tranny mount: Stock with Advanced Adapters 4L60E to NP205 Tranny Tunnel: High hump Radiator: Northern Radiator 209603B with dual Spal electric fans Fuel tank: Ricks stainless tank with Walbro in tank pump Shift linkage: Column/Lokar Exhaust manifolds: Speed Engineering headers model 25-1021 Gears: 3.73 Tire size: 33"x12.5"x15" Carb or EFI: EFI Bagged: No, 2-1/2" lift kit by Skyjacker Running: Yes Go Fast: It Goes Build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=782232
__________________
~ Dan  My 70 K10 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=782232 My 71 SWB build:http://67-72chevytrucks.com/vboard/s...d.php?t=651394 1970 SWB Fleet K10 4X4, 5.3L LM7, 4L60E, Dakota Digital RTX, Vintage Air, Ididit tilt 1971 SWB Fleet C10 - Original SWB Arizona truck, new custom restoration project "Kick out your motor and drive while you're still alive - kick it out!" - Heart 1977 |
|
|
|
|
01-09-2021, 06:10 PM
|
#21 |
|
Registered User
Join Date: Dec 2019
Location: Greer Sc
Posts: 229
|
Re: LSX swappers what ya got?!?!
Still very much a project
Model: 1964 C10 Fleetside SWB Motor: 2003 5.3 (Tahoe) Transmission: 2003 4L60E with Corvette servo (Tahoe) Oil pan: 2003 Tahoe Motor mounts: ICT Tranny mount: Dirty Dingo Tranny Tunnel: Low hump Radiator: CC284 Champion LS swap radiator Fuel tank: No Limit 19 Gallon aluminum tank Shift linkage: None yet Exhaust manifolds: Speed Engineering longtubes Gears: 3.73 Tire size: 28" Carb or EFI: EFI Running: not yet... Build page: https://67-72chevytrucks.com/vboard/...d.php?t=812156
__________________
1964 C10 Resto-mod 5.3L - L59 |
|
|
|
|
09-22-2022, 05:37 PM
|
#22 |
|
Registered User
Join Date: Sep 2020
Location: Cleveland, Ohio
Posts: 493
|
Re: LSX swappers what ya got?!?!
Model: 1968 C10 SWB CST
Motor/transmission: 2018 L83.6l80E Fuel tank: Boyd with Walbro 360 lph Motor mounts: ICT Billet plates, No-Limit Eng. front end Tranny mount: Tejas crossmember Oil pan: Holley knock off 302-20 Radiator: Cool Case Shift linkage: Lokar with Flamin River column Exhaust manifolds: Speed Engineering long tube Gears: 3:73 Rear End: Ford 8.8 narrowed Tire size: Fr - 245/40/20; Rear - 335/30/20 Bagged: Coilovers all 4 corners Running: Yes Carb or FI: Stock EFI Go Fast:BTR 220 cam, Summit 3000 stall converter, aftermarket air intake. No-Limit Eng. rear panhard, trailing arm system. |
|
|
|
|
02-11-2023, 11:10 AM
|
#23 |
|
Senior Member
Join Date: Mar 2015
Location: washington
Posts: 2,201
|
Re: LSX swappers what ya got?!?!
Model: 1970 C10 SWB fleetside
Motor: 1999 5.7 L LS1 (Camaro) Transmission: 4L60E Powder Coated Case. Oil pan: GM Transplant pan Motor mounts: unkown Tranny mount: Ebay W style X member with exhaust clearances. Tranny Tunnel: Low hump Radiator: Dewitt LS conversion with dual Spal electric fans Fuel tank: POS China tank that was modified to work with Blazer fill. Walbro in tank pump Shift linkage: Tilt Column/Lokar Exhaust manifolds: Speed Engineering shorty headers Gears: 3.73 Tire size: 275/45/20 Carb or EFI: LS6 intake with stock LS1 injectors Bagged: No Running: Yes Go Fast: BTR Stage II truck cam. LS6 intake. 354hp at the tires Last edited by Accelo; 12-24-2023 at 05:19 PM. |
|
|
|
|
02-21-2023, 07:10 PM
|
#24 |
|
Senior Member
Join Date: Sep 2020
Location: Kila mt
Posts: 437
|
Re: LSX swappers what ya got?!?!
Model..65 c-10
Engine transmission….04 gto/ t-56 Tick clutch Motor mounts…owner built Transmission mount…owner built Oil pan….f body Radiator….DeWitts w dual Spal fans Shift linkage…short throw Exhaust manifolds…camaro Rearend…narrowed 9” Gears 3:90 Suspension…coil overs all 4 corners…owner built mounts Intake…stock ls1 Cam…tick stage 2 Tires. Front 17x8..rear 17x10 Drives like a go cart..0-80 in a heartbeat…its my shop truck Sway bars front and rear…owner built rear mount |
|
|
|
|
03-02-2023, 04:30 PM
|
#25 |
|
Junior Member
Join Date: Sep 2017
Location: Newton, AL
Posts: 77
|
Re: LSX swappers what ya got?!?!
5.3L and 6L80E. 60 days til C10 Nationals.
|
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
