Porterbuilt 69 - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

PBFAB.COM · 01-20-2008, 02:50 PM

Quote:

Originally Posted by atp

Looks great! - any luck on the swaybar?

I am getting closer on mine. Ran fuel lines today. Curious if you have any close up on the motor mounts?

Should be mocking up a factory C4 bar next week to see how it fits... then we'll go from there!

I will also take some pics of the mounts for you tomorrow... along with the turbos!

PBFAB.COM · 01-20-2008, 02:51 PM

Quote:

Originally Posted by jugernot

What Rear Suspension. Is there a link to it, I need some pics......please.

I am waiting for some trailing arms to arrive... then we'll get some pics!

*Retro68* · 01-20-2008, 03:04 PM

Hey Nathan, Heads up on doing the rest of the frame and front suspension. Still need brakes and brake pump and fuel cell. Looks more like late Feb or March. Can't pull the body till the wheels clearence is set up in the rear and the front.

babyblueoval · 01-21-2008, 03:36 AM

Quote:

Originally Posted by porterbuilt

Should be mocking up a factory C4 bar next week to see how it fits... then we'll go from there!

Nate,
Are you gonna be mocking up a C4 sway bar for your DM C4?
I'd like to see that too so I could use that on mine if possible.

kainzien · 01-21-2008, 10:19 AM

Man that truck is gunna be whipass..
please keep the pics comming....

PBFAB.COM · 01-21-2008, 12:39 PM

Spent a couple more hours on the truck today...

Here's some pics of the motor mounts and how they adapt to the LS engine. Also some clearance pics... It is a tight fit around the rack and pinion... but it does clear everything.

PBFAB.COM · 01-21-2008, 12:45 PM

Shaved the pass. side fender (didn't have the time to strip the paint off it). Also set the core support and hood in place... then pulled out the cut-off wheel and sliced the hood apart. I will be sliding the whole skin back around 2 inches and then I will pie-cut it a small amount, and then lay the front edge back. I always liked the look of the 67-68 hoods... so this one will be sleek with some subtle changes. I will also be changing up the ridge that runs down the hood... and doing something that flows with my dash idea. Hopefully we'll see that take shape in the next few weeks.

PBFAB.COM · 01-21-2008, 12:46 PM

a few more of the hood... and a pair of T4's and their counterparts on the ground.

babyblueoval · 01-21-2008, 12:51 PM

A busy Saturday..

Looks very cool. I can't wait to see the hood.

Of course I can't wait to see my truck with it's '68 hood either.

pcorriveau951 · 01-21-2008, 12:53 PM

quick question for you, hopefully you didnt already answer in previous thread, what is the size of your front wheels and tires and also the backspacing? thank you and great work really like your dropmembers and looking forward to seeing your rear dropmemeber. keep up the great work.

PBFAB.COM · 01-21-2008, 12:58 PM

Quote:

Originally Posted by pcorriveau951

quick question for you, hopefully you didnt already answer in previous thread, what is the size of your front wheels and tires and also the backspacing? thank you and great work really like your dropmembers and looking forward to seeing your rear dropmemeber. keep up the great work.

Wheels are 20x8.5 with an 18mm offset (that's between a 5.25 and 5.5" backspacing).

Tires are 255 35 20

Thanks for the kind words!

Slmd92DIME · 01-21-2008, 02:36 PM

Looks awesome. Cant wait to see some finished pics of the hood.

texanidiot25 · 01-21-2008, 02:43 PM

Twin turbo? Whaoh nelly, this truck is going to scream.

atp · 01-21-2008, 10:49 PM

Thanks for the pics of the mounts and clearance. Now you know why i called you when i installed mine...that baby is close! Will you use the same tranny crossmember that you sent me?

PBFAB.COM · 01-22-2008, 12:37 AM

Quote:

Originally Posted by atp

Thanks for the pics of the mounts and clearance. Now you know why i called you when i installed mine...that baby is close! Will you use the same tranny crossmember that you sent me?

Yes...but I have a different tranny in the truck (T56)...and I had to flip the crossmember over.

slimbailess · 01-22-2008, 08:56 AM

looking like fun nate... so...hows the big block dropmember coming? need a sub to use for setup on the dropmember bb and boltin rear notch? i'm only a 16 hour drive away...haha

BigShoe24 · 01-23-2008, 10:48 AM

Hey Nathan, How long can you get away with leaving the fenders in bare metal? I started striping the paint off my cab and was going to leave them "bare", but wasn't sure how long before the rust. Could you get away with spraying a little clear coat, or epoxy primer? Thanks, Truck looks Great as Always.

PBFAB.COM · 01-23-2008, 11:59 AM

Quote:

Originally Posted by BigShoe24

Hey Nathan, How long can you get away with leaving the fenders in bare metal? I started striping the paint off my cab and was going to leave them "bare", but wasn't sure how long before the rust. Could you get away with spraying a little clear coat, or epoxy primer? Thanks, Truck looks Great as Always.

It's pretty dry out here so they can go for a while (sometimes!). I just make sure I wipe them down with wax and grease remover when I am done working on it. I like the bare metal look, so I won't spray em with epoxy until I have to!

gringoloco · 01-23-2008, 12:09 PM

Get w/ Kevin(Rokcrln). He uses some stuff that is supposed to keep it from rusting for a looong time. He left his tube frame bare for like 2 years or something

like that...

BigShoe24 · 01-23-2008, 12:31 PM

Thanks for the help, I love the bare metal, and just wanted to keep it like that until it's time for the body shop.

PBFAB.COM · 01-23-2008, 01:18 PM

Quote:

Originally Posted by BigShoe24

Thanks for the help, I love the bare metal, and just wanted to keep it like that until it's time for the body shop.

I also make sure I don't touch the metal with my bare hands... and yell at anyone else that does!

You'd be amazed at how many people can't resist touching something shiny!

SCOTI · 01-23-2008, 01:38 PM

Quote:

Originally Posted by porterbuilt

I also make sure I don't touch the metal with my bare hands... and yell at anyone else that does!

You'd be amazed at how many people can't resist touching something shiny!

I did my wheel-tubs (mini-tubs) & they're still in bare steel here in DFW (in the garage). I wipe them down w/some denatured alcohol & keep them closer to the house end of the garage vs. the door end. Worked so far (since November). It's too cold/humid for now.

98L150 · 01-24-2008, 02:19 AM

can't wait to see more progress on this. looks goods.
Now I need to get out in the garage and get my dropmember installed on my 64.

**N2TRUX** · 01-24-2008, 01:02 PM

Quote:

Originally Posted by 98L150

... I need to get out in the garage and get my dropmember installed on my 64.

I assume that means you got it picked up.

franky69c10 · 01-24-2008, 01:21 PM

all your work is the best...

01-20-2008, 03:04 PM	#128
Retro68 Account Suspended Join Date: Jul 2006 Location: Mesa Arizona Posts: 294	Re: Porterbuilt 69 Hey Nathan, Heads up on doing the rest of the frame and front suspension. Still need brakes and brake pump and fuel cell. Looks more like late Feb or March. Can't pull the body till the wheels clearence is set up in the rear and the front.

01-21-2008, 10:19 AM	#130
kainzien Registered User Join Date: Apr 2006 Location: Texas Posts: 93	Re: Porterbuilt 69 Man that truck is gunna be whipass.. please keep the pics comming.... __________________ Chickenhouse chopshop 81 rcsb chevy bagged LS1/4l60E(under the knife) 94 ecswb L92 headed LQ9/ 4l80E(waiting to go under the knife) 78 rcsb chevy LQ4/4L80E

01-21-2008, 12:39 PM	#131
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Porterbuilt 69 Spent a couple more hours on the truck today... Here's some pics of the motor mounts and how they adapt to the LS engine. Also some clearance pics... It is a tight fit around the rack and pinion... but it does clear everything. Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

01-21-2008, 12:45 PM	#132
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Porterbuilt 69 Shaved the pass. side fender (didn't have the time to strip the paint off it). Also set the core support and hood in place... then pulled out the cut-off wheel and sliced the hood apart. I will be sliding the whole skin back around 2 inches and then I will pie-cut it a small amount, and then lay the front edge back. I always liked the look of the 67-68 hoods... so this one will be sleek with some subtle changes. I will also be changing up the ridge that runs down the hood... and doing something that flows with my dash idea. Hopefully we'll see that take shape in the next few weeks. Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

01-21-2008, 12:46 PM	#133
PBFAB.COM Senior Member Join Date: Dec 2003 Location: Mesa,Az Posts: 3,981	Re: Porterbuilt 69 a few more of the hood... and a pair of T4's and their counterparts on the ground. Attached Images __________________ www.PorterbuiltFabrication.com Phone: 480-297-2621 E-mail: sales@pbfab.com Find us on FaceBook under Porterbuilt Fabrication Specializing in Chassis and Suspension Components for your Classic Chevrolet Truck. We offer components from the following manufacturers: Porterbuilt Accuair Ridetech (Air Ride Technologies) Air Lift Wilwood Intro Unisteer ECE Gotta Show Air Lift Borgeson CPP Supporting this forum since 2003!

01-21-2008, 12:51 PM	#134
babyblueoval Registered User Join Date: Apr 2006 Location: Arkansas Posts: 835	Re: Porterbuilt 69 A busy Saturday.. Looks very cool. I can't wait to see the hood. Of course I can't wait to see my truck with it's '68 hood either. __________________ Jim '71 Blazer-Porterbuilt Dropmember C4/LS1/6L80E '57 VW beetle - Oct. 2006 Hot VW's pg. 87 - 350hp intercooled, turbocharged, EFI 2.3liter and 5spd in the works '87 BMW 325i - daily driver Last edited by babyblueoval; 01-21-2008 at 12:59 PM.

01-21-2008, 12:53 PM	#135
pcorriveau951 Registered User Join Date: Nov 2007 Location: riverside, ca Posts: 147	Re: Porterbuilt 69 quick question for you, hopefully you didnt already answer in previous thread, what is the size of your front wheels and tires and also the backspacing? thank you and great work really like your dropmembers and looking forward to seeing your rear dropmemeber. keep up the great work.

01-21-2008, 02:36 PM	#137
Slmd92DIME Registered User Join Date: Mar 2007 Location: West Virginia Posts: 481	Re: Porterbuilt 69 Looks awesome. Cant wait to see some finished pics of the hood.

01-21-2008, 02:43 PM	#138
texanidiot25 Eat My Rust Join Date: Jan 2007 Location: Cypress, Texas Posts: 3,362	Re: Porterbuilt 69 Twin turbo? Whaoh nelly, this truck is going to scream.

01-21-2008, 10:49 PM	#139
atp Registered User Join Date: Apr 2007 Location: Inman, SC Posts: 1,108	Re: Porterbuilt 69 Thanks for the pics of the mounts and clearance. Now you know why i called you when i installed mine...that baby is close! Will you use the same tranny crossmember that you sent me?

01-22-2008, 08:56 AM	#141
slimbailess Registered User Join Date: Jul 2007 Location: Haltom City,TX Posts: 127	Re: Porterbuilt 69 looking like fun nate... so...hows the big block dropmember coming? need a sub to use for setup on the dropmember bb and boltin rear notch? i'm only a 16 hour drive away...haha

01-23-2008, 10:48 AM	#142
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: Porterbuilt 69 Hey Nathan, How long can you get away with leaving the fenders in bare metal? I started striping the paint off my cab and was going to leave them "bare", but wasn't sure how long before the rust. Could you get away with spraying a little clear coat, or epoxy primer? Thanks, Truck looks Great as Always.

01-23-2008, 12:09 PM	#144
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Porterbuilt 69 Get w/ Kevin(Rokcrln). He uses some stuff that is supposed to keep it from rusting for a looong time. He left his tube frame bare for like 2 years or something like that... __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

01-23-2008, 12:31 PM	#145
BigShoe24 True Addiction Join Date: Nov 2005 Location: FTL Posts: 415	Re: Porterbuilt 69 Thanks for the help, I love the bare metal, and just wanted to keep it like that until it's time for the body shop.

01-24-2008, 02:19 AM	#148
98L150 ///Relaxed Atmosphere Join Date: Apr 2003 Location: Hockley, TX Posts: 657	Re: Porterbuilt 69 can't wait to see more progress on this. looks goods. Now I need to get out in the garage and get my dropmember installed on my 64. __________________ 72 Suburban 64 Chevy short fleet 04 Chevy Colorado Sport Reg Cab 2012 Chevy Avalanche 2003 Chevy S10 Blazer Xtreme http://www.hubgarage.com/mygarage/RA_Jeff 64 Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=295915



Register or Log In To remove these advertisements.

01-24-2008, 01:21 PM	#150
franky69c10 chevy runs deep Join Date: Mar 2006 Location: PHOENIX AZ Posts: 1,074	Re: Porterbuilt 69 all your work is the best... __________________ RAIDER NATION 1969 c10 swb soon 2 b on the road... My LWB is a SWB now http://67-72chevytrucks.com/vboard/s...d.php?t=498241

Register or Log In To remove these advertisements.