MO Parting out well optioned 70 GMC 1/2 ton. - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**specialtyretail** · 10-17-2013, 09:11 PM

Quote:

Originally Posted by rich67

that put me next on frame fred?

It is all yours. Thanks, Fred.

rich67 · 10-17-2013, 09:16 PM

sendin a pm.

**specialtyretail** · 10-17-2013, 09:31 PM

Quote:

Originally Posted by rich67

sendin a pm.

Got it....

**specialtyretail** · 10-19-2013, 10:53 AM

OK, pulling the motor and transmission when I get of work this afternoon. I should have time this weekend to reply to everyone that was asking about parts. Sorry for the delay, work has been a little hectic. Anyways, after the engine deal is done, i can concentrate on finishing it off. Anything you need, nothing is too small or insignificant. If we were working a deal, bear with me if you can. If you had to move on, I understand and am sorry for not taking care of you. If I price something that is just out of line, let me know. Thanks, Fred.

**specialtyretail** · 10-19-2013, 01:55 PM

Pics for ontrak12....

JimH2828 · 10-19-2013, 02:59 PM

Quote:

Originally Posted by JimH2828 View Post
I'm interested in the below parts pending condition and price shipped to 30005 GA.

1) complete vent window assemblies
2) complete steering column assembly
- rag joint to steering wheel nut, no steering wheel
3) complete brake booster, MC assembly
- brake peddle push rod, firewall bracket parts, Booster, check valve, MC, distro block
4) Transmission dip stick and tube - if works on TH350.
Thanks
Jim

Hey Jim.
The passenger vent glass has a broken pivot. The trans dipstick is going with the transmission. Let me do some figuring on all the brake stuff & steering column, shipping will be pretty tough. I will try to have a price we can both be happy with.
Thanks, Fred.

Fred, no worries about the trans dipstick going with the trans, I understand or that you are super busy. I've updated my list below.

1) complete vent window assemblies
- can you send some pics?
- is the glass Soft-Ray? clear or tinted?
2) complete steering column assembly all brackets and bolts
- rag joint to steering wheel nut, no steering wheel
3) complete brake booster, MC assembly
- brake peddle push rod, firewall bracket parts, Booster, check valve, master cylinder, distrobution block, short brake lines
4) Kick panel vent assemblies
- pics please
5) Ignition and door locks with keys, if they are true 1970s.
- pic of the lock codes please.
1970: Lock Code Series: 0E00-9E99 & 0F00-9F99

Thanks
Jim

tallbob · 10-20-2013, 04:45 PM

Looking for the power steering pump brackets for a 70 C-10, swp smallblock, particularly the rear bracket that is behind the reservoir. Thanks much, Bob

**specialtyretail** · 10-20-2013, 07:08 PM

Hey Jim. The keys are aftermarket, I did get time to check on that. My grandaughter came up for the weekend and I have just been able to get on here in short little spurts. She kind of like our time together and I am going to get all I can of it before she outgrows me. The vent windows are in sad shape, I have not checked on the kick panels, they are probably pretty rough as well. Shipping is going to be the deal breaker probably on everything you want. Off the top of my head. Steering column complete from nut to rag joint and the whole power brake set up,,,,$200.00 shipped for all of it. Thanks, Fred.

**specialtyretail** · 10-20-2013, 07:09 PM

Quote:

Originally Posted by tallbob

Looking for the power steering pump brackets for a 70 C-10, swp smallblock, particularly the rear bracket that is behind the reservoir. Thanks much, Bob

Hey Bob. I was wanting to keep all the power steering together if I could. If I see we are going to break it up, I will let you know. Thanks, Fred.

UP GRADE · 10-21-2013, 12:08 AM

How about the fenders any updates on them?

**specialtyretail** · 10-21-2013, 11:32 AM

Quote:

Originally Posted by UP GRADE

How about the fenders any updates on them?

Yes, got them pulled. I will have some pics this evening. Thanks, Fred.

**specialtyretail** · 10-21-2013, 11:34 AM

Frame with rusty bed, rusy cab and 6 lug posi trac rearend still available. Thanks, Fred.

lopemaxx · 10-21-2013, 03:28 PM

fred glove box door arrived thanks again

**specialtyretail** · 10-21-2013, 04:48 PM

Quote:

Originally Posted by lopemaxx

fred glove box door arrived thanks again

Good deal. Thanks, Fred.

48richard · 10-21-2013, 05:16 PM

Fred,
Any pics of the lower moldings yet?

Richard

**specialtyretail** · 10-21-2013, 06:51 PM

Quote:

Originally Posted by 48richard

Fred,
Any pics of the lower moldings yet?

Richard

Hey Richard. Moldings are full of sheet rock screws and rivets. Sorry, I thought they were in better shape. I wish i would have looked closer when everyone started asking about them. Thanks, Fred.

**specialtyretail** · 10-21-2013, 06:55 PM

Quote:

Originally Posted by UP GRADE

How about the fenders any updates on them?

SOLD,,,, THANKS.... Got some pics before the rain started. The passenger side is not as nice as I thought it was. If you can use them, $100.00 for the pair. Thanks, Fred.

doubleRdazz · 10-21-2013, 07:56 PM

Still have the bumper?

**specialtyretail** · 10-21-2013, 10:33 PM

Quote:

Originally Posted by doubleRdazz

Still have the bumper?

Yes, still have it but we still are not wanting to ship. Like I said in the earlier, shipping large parts just does not work for us. Sorry, just have had a couple of hassles doing it and do not care to or have time to do it again. Thanks, Fred.

tallbob · 10-22-2013, 10:09 AM

Fred,
I would be a buyer for the pump,brackets, pulleys and hoses...pretty much everything but the steering box as I already have one of those. Let me know your thoughts on that? Thanks again, Bob

**specialtyretail** · 10-22-2013, 11:24 AM

Quote:

Originally Posted by tallbob

Fred,
I would be a buyer for the pump,brackets, pulleys and hoses...pretty much everything but the steering box as I already have one of those. Let me know your thoughts on that? Thanks again, Bob

Cool. Let me get some pics and a price this evening. Thanks, Fred.

BlackhillsHD · 10-22-2013, 11:30 PM

Looking for A/C fresh air door under cowl if not broken. Thanks.

**specialtyretail** · 10-23-2013, 11:13 AM

Quote:

Originally Posted by tallbob

Fred,
I would be a buyer for the pump,brackets, pulleys and hoses...pretty much everything but the steering box as I already have one of those. Let me know your thoughts on that? Thanks again, Bob

Hey Bob. Power steering pump w/pulley, complete bracket set and both hoses, $65.00 shipped. Thanks, Fred.

tallbob · 10-23-2013, 11:45 AM

Fred,
I am good with that. Could you post a picture or two for me? Also,let me know if I can also purchase the pulley that is on the harmonic balancer that would drive the PS pump? My truck does not have AC if that matters. Thanks, Bob

**specialtyretail** · 10-23-2013, 12:07 PM

Quote:

Originally Posted by tallbob

Fred,
I am good with that. Could you post a picture or two for me? Also,let me know if I can also purchase the pulley that is on the harmonic balancer that would drive the PS pump? My truck does not have AC if that matters. Thanks, Bob

Hey Bob. i can get you some pics tonight after work. Sorry, crankshaft pulley went with the engine. Thanks, Fred.

10-17-2013, 09:16 PM	#127
rich67 Registered User Join Date: Aug 2009 Location: New Canton, Il Posts: 1,857	Re: Parting out well optioned 70 GMC 1/2 ton. sendin a pm.

10-19-2013, 10:53 AM	#129
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting out well optioned 70 GMC 1/2 ton. OK, pulling the motor and transmission when I get of work this afternoon. I should have time this weekend to reply to everyone that was asking about parts. Sorry for the delay, work has been a little hectic. Anyways, after the engine deal is done, i can concentrate on finishing it off. Anything you need, nothing is too small or insignificant. If we were working a deal, bear with me if you can. If you had to move on, I understand and am sorry for not taking care of you. If I price something that is just out of line, let me know. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks. Last edited by specialtyretail; 10-20-2013 at 02:28 PM.

10-19-2013, 01:55 PM	#130
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting out well optioned 70 GMC 1/2 ton. Pics for ontrak12.... Attached Images __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

10-20-2013, 04:45 PM	#132
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Parting out well optioned 70 GMC 1/2 ton. Looking for the power steering pump brackets for a 70 C-10, swp smallblock, particularly the rear bracket that is behind the reservoir. Thanks much, Bob

10-20-2013, 07:08 PM	#133
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting out well optioned 70 GMC 1/2 ton. Hey Jim. The keys are aftermarket, I did get time to check on that. My grandaughter came up for the weekend and I have just been able to get on here in short little spurts. She kind of like our time together and I am going to get all I can of it before she outgrows me. The vent windows are in sad shape, I have not checked on the kick panels, they are probably pretty rough as well. Shipping is going to be the deal breaker probably on everything you want. Off the top of my head. Steering column complete from nut to rag joint and the whole power brake set up,,,,$200.00 shipped for all of it. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

10-21-2013, 12:08 AM	#135
UP GRADE one set closer Join Date: Jul 2003 Location: Memphis TN. Posts: 722	Re: Parting out well optioned 70 GMC 1/2 ton. How about the fenders any updates on them?

10-21-2013, 11:34 AM	#137
specialtyretail So,, what else you got??? Join Date: May 2010 Location: Jackson, Mo Posts: 18,637	Re: Parting out well optioned 70 GMC 1/2 ton. Frame with rusty bed, rusy cab and 6 lug posi trac rearend still available. Thanks, Fred. __________________ Our paypal is specialtyretail@yahoo.com Please DO NOTsend paypal funds as a gift, right is right. Thanks.... Sorry, we CANNOT ship larger parts. Thanks.

10-21-2013, 03:28 PM	#138
lopemaxx Registered User Join Date: Feb 2012 Location: Billings, MT Posts: 78	Re: Parting out well optioned 70 GMC 1/2 ton. fred glove box door arrived thanks again __________________ 70 Chevelle SS (clone), 454, 350 auto 71 K5 350, 350 auto, 3" body lift, 35's -_--_--_- ______ _--_--_- /___\|__\____ -_--_-_ \|____\|__\|___] ......_@_ _ _ _ @

10-21-2013, 05:16 PM	#140
48richard Registered User Join Date: Oct 2009 Location: Phoenix, AZ Posts: 475	Re: Parting out well optioned 70 GMC 1/2 ton. Fred, Any pics of the lower moldings yet? Richard __________________ 1971 C10 Longbed, 350/TH350

10-21-2013, 07:56 PM	#143
doubleRdazz Registered User Join Date: May 2011 Location: jersey Posts: 42	Re: Parting out well optioned 70 GMC 1/2 ton. Still have the bumper?

10-22-2013, 10:09 AM	#145
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Parting out well optioned 70 GMC 1/2 ton. Fred, I would be a buyer for the pump,brackets, pulleys and hoses...pretty much everything but the steering box as I already have one of those. Let me know your thoughts on that? Thanks again, Bob

10-22-2013, 11:30 PM	#147
BlackhillsHD Registered User Join Date: Nov 2011 Location: Rapid City SD Posts: 140	Re: Parting out well optioned 70 GMC 1/2 ton. Looking for A/C fresh air door under cowl if not broken. Thanks. __________________ 1970 : Chevy: K20 "Frank the Tank" 6.0 LS, 4L80E, 14 bolt, and Dana 44 1970 K5 Blazer CST 350, TH350, Np205, Dana 60 and 14 bolt General Motors Master Certified wrench swinger ASE certified Master auto tech Instructor of Automotive Technology

10-23-2013, 11:45 AM	#149
tallbob Registered User Join Date: Aug 2013 Location: Greensburg,Pa Posts: 147	Re: Parting out well optioned 70 GMC 1/2 ton. Fred, I am good with that. Could you post a picture or two for me? Also,let me know if I can also purchase the pulley that is on the harmonic balancer that would drive the PS pump? My truck does not have AC if that matters. Thanks, Bob



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.