KS parting out 72 GMC LB BB - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**29od1** · 02-07-2012, 10:10 AM

I'll take the door panels for $30 and I'd like to have a look at the other parts you have. I'm Wichita also so PM me with a good time to see it. Anytime after 5 pm is good for me.

Thanks,
David

**Cash3481** · 02-07-2012, 01:01 PM

29od1:
PM sent to you.
If you want the door panels you can look and get them tonight.
Mike

cc_bob · 02-07-2012, 01:23 PM

Quote:

Originally Posted by Cash3481

CC_bob looks like $9.51 for parcel post. let me know and Ill pm you my paypal.
Mike

I'll take it. Just PM the info and I'll get it to you tonight.

Thanks!!!

**michael bustamante** · 02-07-2012, 01:57 PM

SENT YOU A PM, ABOUT THE BOOSTER SETUP. ANY WAY YOU COULD SEND A PIC OF THE PROP VALVE? i COULDNT TELL IF THERE WAS A BUTTON ON IT LIKE A CHEVY VALVE. JUST TO CONFIRM, ITS A DISC DRUM SET UP FOR HALF TON RIGHT?
Oh yeah and also, this includes the rod to the brake padal right?

**Cash3481** · 02-07-2012, 03:40 PM

Quote:

Originally Posted by michael bustamante

SENT YOU A PM, ABOUT THE BOOSTER SETUP. ANY WAY YOU COULD SEND A PIC OF THE PROP VALVE? i COULDNT TELL IF THERE WAS A BUTTON ON IT LIKE A CHEVY VALVE. JUST TO CONFIRM, ITS A DISC DRUM SET UP FOR HALF TON RIGHT?
Oh yeah and also, this includes the rod to the brake padal right?

Cant send a pic till I get off work. Ill send it when i get off. This is a 3/4 ton Disc/Drum setup. I do have the rod and hardware for this thing as well like you requested.
Mike

**Cash3481** · 02-07-2012, 03:49 PM

Quote:

Originally Posted by cc_bob

I'll take it. Just PM the info and I'll get it to you tonight.

Thanks!!!

PM sent to for paypal!

**Cash3481** · 02-07-2012, 04:14 PM

Quote:

Originally Posted by Cash3481

Cant send a pic till I get off work. Ill send it when i get off. This is a 3/4 ton Disc/Drum setup. I do have the rod and hardware for this thing as well like you requested.
Mike

Michael Bustamante
I found thios picture for you on the first thread. if it doesnt show what you need let me know. I have everything in this picture (braces and hardware included in the box.

**Cash3481** · 02-07-2012, 11:19 PM

Seat belts $35 plus shipping finally got them off retractors are not the best but they are all there.
BB PS hoses $35 plus shipping
clutch delete plate $15 shipped to the lower 48.

**Cash3481** · 02-07-2012, 11:22 PM

Additional pics of seatbelt and clutch delete plate.
A little fuzzie but nothing wrong with it and I have the hardware too.

hgs_notes · 02-08-2012, 02:58 PM

What is the tailgate condition and would you ship it? Have any pics?

**Cash3481** · 02-08-2012, 03:35 PM

Quote:

Originally Posted by hgs_notes

What is the tailgate condition and would you ship it? Have any pics?

Rusted through on both sides and not worth trying to save.
Mike

**DaHos** · 02-08-2012, 03:54 PM

Status on shipping of BB maifolds?

thx, D'

**Cash3481** · 02-08-2012, 04:04 PM

DaHos: BB manifolds package shipped USPS today at lunch. (half price through USPS ve UPS). I added $100 insurance for both of us!

DD1: One of your packages went ont UPS yesterday and the other went USPS today at lunch. (cost was 2X on the 2d box so I waited until today). I added $100 insurance for both of us!

CC_BOB: Intermediate shaft shipped today as well. (Price was 2X through UPS)

Please let me know when you receive it.

**Cash3481** · 02-10-2012, 07:03 PM

Here is the:

BB high hump $90 shipped

BB fan shroud $90 Shipped

400 Gas pedal $35 plus the ride

BB power steering lines 25 plus the ride

Clutch delete $15 shipped

Let me know if these prices are off or if your intreasted.

**Ironhorse** · 02-10-2012, 08:36 PM

Mike, I'm interested in the clutch delete. Do you have the two attaching hardware bolts/screws ? That is a metal plate correct? Not sure about them since my truck has been a stick shift since I bought it but will be going to auto. If you recall, I got the column from you at the Wichita Swap meet. Enjoyed talking to you. Let me know on the delete plate, you could just put it into a small bubble envelope and drop it in the mail. Total price to Wellington, money order okay ? Don't have a Paypal account.

**Cash3481** · 02-10-2012, 10:08 PM

Quote:

Originally Posted by Ironhorse

Mike, I'm interested in the clutch delete. Do you have the two attaching hardware bolts/screws ? That is a metal plate correct? Not sure about them since my truck has been a stick shift since I bought it but will be going to auto. If you recall, I got the column from you at the Wichita Swap meet. Enjoyed talking to you. Let me know on the delete plate, you could just put it into a small bubble envelope and drop it in the mail. Total price to Wellington, money order okay ? Don't have a Paypal account.

Plate is yours if you want it. I can put in the bubble wrap and yes screws too. Pm your address and I'll get it in the mail. Mailing is $1.70 to Wellington Ks.
Posted via Mobile Device

DD1 · 02-11-2012, 02:39 PM

Hey Mike,

I was curious to know if you included the part circled in this photo with my package. I did not circle it on the original photos, b/c I did not realize that it is part of the A/C system, at least I think it is based on some of the other posts I have read on here.

Could you confirm if it is in fact part of the A/C system and what it is? If you did not send it and it is part of the A/C system, and you still have it, what would it take to get it to me?

Sorry about the hassle, but I am not really familiar with the A/C system.

thanks,

Darien

**jimer1964** · 02-11-2012, 04:10 PM

Mike, vents and visors came today! thank you for a great deal!

**Cash3481** · 02-11-2012, 07:57 PM

Quote:

Originally Posted by DD1

Hey Mike,

I was curious to know if you included the part circled in this photo with my package. I did not circle it on the original photos, b/c I did not realize that it is part of the A/C system, at least I think it is based on some of the other posts I have read on here.

Could you confirm if it is in fact part of the A/C system and what it is? If you did not send it and it is part of the A/C system, and you still have it, what would it take to get it to me?

Sorry about the hassle, but I am not really familiar with the A/C system.

thanks,

Darien

DD1
I have an additional box ot things that went to the dash heater stuff. I guess i only sent what you circled... No problem, I'll send all the rest of it to you on monday. Sound good to you?
Mike
Posted via Mobile Device

Hard On Parts · 02-12-2012, 05:55 AM

Is the inside of that fuel tank clean? Rust free?

**Cash3481** · 02-12-2012, 08:20 AM

Quote:

Originally Posted by Hard On Parts

Is the inside of that fuel tank clean? Rust free?

Truck had no gas cap when I got it. I emptied the tank and fuel didn't have water in it. There is some light surface rust inside the neck. I can get some pics if you'd like to see it better. Let me know.
Mike
Posted via Mobile Device

**Cash3481** · 02-12-2012, 08:50 AM

Price drop!

Quote:

Originally Posted by Cash3481

Here is the:

BB high hump $80 shipped

BB fan shroud $80 Shipped

400 Gas pedal $35 plus the ride

BB power steering lines 25 plus the ride

Clutch delete $15 shipped sold to ironhorse

Let me know if these prices are off or if your intreasted.

Posted via Mobile Device

chewychevy67 · 02-12-2012, 11:34 AM

any exhaust hanger pic's yet?

**Cash3481** · 02-12-2012, 02:57 PM

Quote:

Originally Posted by chewychevy67

any exhaust hanger pic's yet?

Chewychevy67 Pics attached, I forgot to load them. I had to replace the tranny in my 72 this weekend. Mike

chewychevy67 · 02-12-2012, 04:09 PM

I am going to pass on the hangers. I need the pipe clamp parts that are not cut off. Rod.

02-07-2012, 10:10 AM	#126
29od1 Senior Member Join Date: Oct 2006 Location: Wichita, Kansas Posts: 1,050	Re: parting out 72 GMC LB BB I'll take the door panels for $30 and I'd like to have a look at the other parts you have. I'm Wichita also so PM me with a good time to see it. Anytime after 5 pm is good for me. Thanks, David Last edited by 29od1; 02-07-2012 at 10:48 AM.

02-07-2012, 01:01 PM	#127
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB 29od1: PM sent to you. If you want the door panels you can look and get them tonight. Mike

02-07-2012, 01:57 PM	#129
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,833	Re: parting out 72 GMC LB BB SENT YOU A PM, ABOUT THE BOOSTER SETUP. ANY WAY YOU COULD SEND A PIC OF THE PROP VALVE? i COULDNT TELL IF THERE WAS A BUTTON ON IT LIKE A CHEVY VALVE. JUST TO CONFIRM, ITS A DISC DRUM SET UP FOR HALF TON RIGHT? Oh yeah and also, this includes the rod to the brake padal right? __________________ 1967custom

02-07-2012, 11:19 PM	#133
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Seat belts $35 plus shipping finally got them off retractors are not the best but they are all there. BB PS hoses $35 plus shipping clutch delete plate $15 shipped to the lower 48. Attached Images

02-07-2012, 11:22 PM	#134
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Additional pics of seatbelt and clutch delete plate. A little fuzzie but nothing wrong with it and I have the hardware too. Attached Images

02-08-2012, 02:58 PM	#135
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,117	Re: parting out 72 GMC LB BB What is the tailgate condition and would you ship it? Have any pics? __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

02-08-2012, 03:54 PM	#137
DaHos Senior Member Join Date: Sep 2011 Location: Owosso, Michigan Posts: 2,854	Re: parting out 72 GMC LB BB Status on shipping of BB maifolds? thx, D' __________________ 1967 C10 SWB Owner - Rustbelt Restorations

02-08-2012, 04:04 PM	#138
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB DaHos: BB manifolds package shipped USPS today at lunch. (half price through USPS ve UPS). I added $100 insurance for both of us! DD1: One of your packages went ont UPS yesterday and the other went USPS today at lunch. (cost was 2X on the 2d box so I waited until today). I added $100 insurance for both of us! CC_BOB: Intermediate shaft shipped today as well. (Price was 2X through UPS) Please let me know when you receive it. Last edited by Cash3481; 02-08-2012 at 04:05 PM. Reason: Added info

02-10-2012, 07:03 PM	#139
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: parting out 72 GMC LB BB Here is the: BB high hump $90 shipped BB fan shroud $90 Shipped 400 Gas pedal $35 plus the ride BB power steering lines 25 plus the ride Clutch delete $15 shipped Let me know if these prices are off or if your intreasted. Attached Images

02-10-2012, 08:36 PM	#140
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,087	Re: parting out 72 GMC LB BB Mike, I'm interested in the clutch delete. Do you have the two attaching hardware bolts/screws ? That is a metal plate correct? Not sure about them since my truck has been a stick shift since I bought it but will be going to auto. If you recall, I got the column from you at the Wichita Swap meet. Enjoyed talking to you. Let me know on the delete plate, you could just put it into a small bubble envelope and drop it in the mail. Total price to Wellington, money order okay ? Don't have a Paypal account. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

02-11-2012, 02:39 PM	#142
DD1 Registered User Join Date: Aug 2011 Location: new york, ny Posts: 1,063	Re: parting out 72 GMC LB BB Hey Mike, I was curious to know if you included the part circled in this photo with my package. I did not circle it on the original photos, b/c I did not realize that it is part of the A/C system, at least I think it is based on some of the other posts I have read on here. Could you confirm if it is in fact part of the A/C system and what it is? If you did not send it and it is part of the A/C system, and you still have it, what would it take to get it to me? Sorry about the hassle, but I am not really familiar with the A/C system. thanks, Darien Attached Images

02-11-2012, 04:10 PM	#143
jimer1964 Senior Member Join Date: Jan 2007 Location: bowmansville,pa Posts: 1,679	Re: parting out 72 GMC LB BB Mike, vents and visors came today! thank you for a great deal!

02-12-2012, 05:55 AM	#145
Hard On Parts Registered User Join Date: Dec 2008 Location: Cedar Vale, KS Posts: 145	Re: parting out 72 GMC LB BB Is the inside of that fuel tank clean? Rust free?

02-12-2012, 11:34 AM	#148
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,426	Re: parting out 72 GMC LB BB any exhaust hanger pic's yet?

02-12-2012, 04:09 PM	#150
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,426	Re: parting out 72 GMC LB BB I am going to pass on the hangers. I need the pipe clamp parts that are not cut off. Rod.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.