OR Parting 1972 C30 350/TH400 - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

pickupman96 · 02-24-2015, 09:00 PM

Are you willing to make some cuts on the cab? I need both b posts from the back of the cab trim to the bottom of the corner and about 1 ft in on the back.

DLTruck1973 · 02-24-2015, 09:10 PM

Quote:

Originally Posted by pickupman96

Are you willing to make some cuts on the cab? I need both b posts from the back of the cab trim to the bottom of the corner and about 1 ft in on the back.

Let me see what I can find. I am not cutting this cab up but may have what you need on another cab. Are you looking for good solid cab corners?

Give me some time to check.

Thank you for the interest,
Tom

pickupman96 · 02-24-2015, 10:02 PM

Solid corners would be a plus. The problem I have is that at some point the corners were replaced and they welded the entire replacement corner in. Now with that rotted off there is nothing left to weld to. The top of the bed had also hit the cab at some time leaving massive dents. Rather than have 15 different patches on this thing I would rather graft in one or two good pieces.

72 blue · 02-24-2015, 11:01 PM

Thomas, Blue door panels any good ? Ship to 35125

Rick

DLTruck1973 · 02-25-2015, 12:03 AM

Quote:

Originally Posted by pickupman96

Solid corners would be a plus. The problem I have is that at some point the corners were replaced and they welded the entire replacement corner in. Now with that rotted off there is nothing left to weld to. The top of the bed had also hit the cab at some time leaving massive dents. Rather than have 15 different patches on this thing I would rather graft in one or two good pieces.

Sounds good. I should have what you are looking for and I will post some photos for you tomorrow with prices. If you can get me a zip code, I can check shipping as well.

Thank you,
Thomas

DLTruck1973 · 02-25-2015, 12:04 AM

Quote:

Originally Posted by 72 blue

Thomas, Blue door panels any good ? Ship to 35125

Rick

Hi Rick,

I will take a good close look at them tomorrow and post some photos for you.

Thank you for the interest,
Thomas

mrf1002u · 02-25-2015, 10:05 AM

What rearend is in it?

pickupman96 · 02-25-2015, 10:24 AM

My zip is 06801

DLTruck1973 · 02-25-2015, 04:37 PM

Quote:

Originally Posted by 72 blue

Thomas, Blue door panels any good ? Ship to 35125

Rick

Hi Rick,

Here are some photos. I will need $75.00 for the pair. They are not perfect but nice driver quality overall. I will check shipping for you if still interested.

Thank you,
Thomas

72 blue · 02-25-2015, 06:46 PM

Quote:

Originally Posted by DLTruck1973

Hi Rick,

Here are some photos. I will need $75.00 for the pair. They are not perfect but nice driver quality overall. I will check shipping for you if still interested.

Thank you,
Thomas

Hopefully shipping won't kill the deal......35125
thanks

Rick

DLTruck1973 · 02-25-2015, 06:51 PM

Quote:

Originally Posted by mrf1002u

What rearend is in it?

This truck has an HO72 with an open diff and 4:56 gears. It would be $300.00 or I have one with a Detroit locker (no spin) for $350.00

I also have them with 4:11 gears, $350.00 for a open and $400.00 for a locker.

They will be shipped in wood crates to your zip code. Let me know what combination you want and your zip code and I can quote shipping.

Thank you for the interest. This post will also apply to the 68 C20 Longhorn you inquired on.

Thank you for the interest,
Thomas

DLTruck1973 · 02-25-2015, 06:51 PM

Quote:

Originally Posted by 72 blue

Hopefully shipping won't kill the deal......35125
thanks

Rick

Rick, I will check and let you know.

Thank you,
Thomas

DLTruck1973 · 02-25-2015, 06:54 PM

Quote:

Originally Posted by pickupman96

Solid corners would be a plus. The problem I have is that at some point the corners were replaced and they welded the entire replacement corner in. Now with that rotted off there is nothing left to weld to. The top of the bed had also hit the cab at some time leaving massive dents. Rather than have 15 different patches on this thing I would rather graft in one or two good pieces.

Here are some photos. This would be the best cab I have to cut them from currently. I also have a 68 Longhorn cab I can make cuts on but not as nice as this one in the area you want. These cuts will be from a 72 cab. $85.00 each plus shipping if interested. The corners are pretty solid but may need a little work to be real nice.

Let me know and thank you.
Thomas

DLTruck1973 · 02-26-2015, 06:31 PM

Quote:

Originally Posted by 72 blue

Hopefully shipping won't kill the deal......35125
thanks

Rick

Hi Rick,

To send these to your zip code well padded to avoid damage is going to run $62.00 for shipping. It may be less than that but I would have to actual pack them to ship and make sure I stay with in the size and weight that I estimated. These will get damaged in shipping if not protected well.

Let me know. Your total would be $137.00

Thank you for the interest,
Thomas

72 blue · 02-27-2015, 02:03 PM

Quote:

Originally Posted by DLTruck1973

Hi Rick,

To send these to your zip code well padded to avoid damage is going to run $62.00 for shipping. It may be less than that but I would have to actual pack them to ship and make sure I stay with in the size and weight that I estimated. These will get damaged in shipping if not protected well.

Let me know. Your total would be $137.00

Thank you for the interest,
Thomas

Ill take them,,,,send me a pm to send payment ill give you exact address

Thanks Thomas

DLTruck1973 · 02-27-2015, 02:22 PM

Quote:

Originally Posted by 72 blue

Ill take them,,,,send me a pm to send payment ill give you exact address

Thanks Thomas

PM on the way

HOTRODSBYCHIP · 03-11-2015, 01:50 PM

Do you still have the center link?

DLTruck1973 · 03-11-2015, 02:50 PM

Quote:

Originally Posted by HOTRODSBYCHIP

Do you still have the center link?

Yes we do. $40.00 plus shipping. I can get you a quote with your zip code.

Thank you for the interest

Thomas

72 blue · 03-11-2015, 04:39 PM

Thomas,

I got the door panels yesterday.....thanks for taking the time to package them up so good.

They will be a good fit for my old ride. I'm not making it perfect, but, I'm making it a nice daily driver. I painted the inside of my cab today....... I still need other parts....By chance, do you guys have any nice used regulators?

Thanks again

Rick

DLTruck1973 · 03-11-2015, 06:03 PM

Quote:

Originally Posted by 72 blue

Thomas,

I got the door panels yesterday.....thanks for taking the time to package them up so good.

They will be a good fit for my old ride. I'm not making it perfect, but, I'm making it a nice daily driver. I painted the inside of my cab today....... I still need other parts....By chance, do you guys have any nice used regulators?

Thanks again

Rick

Hi Rick,

The 72 only drivers side regulator is a tough one to get in good condition and at this time I do not have one. I should however have a nice passenger side for $45.00 plus shipping.

Let me know if interested,
Thomas

HOTRODSBYCHIP · 03-11-2015, 07:27 PM

Quote:

Originally Posted by DLTruck1973

Yes we do. $40.00 plus shipping. I can get you a quote with your zip code.

Thank you for the interest

Thomas

37363 zip code
Could you send me a picture when you have time
Thanks

DLTruck1973 · 03-11-2015, 09:23 PM

Quote:

Originally Posted by HOTRODSBYCHIP

37363 zip code
Could you send me a picture when you have time
Thanks

I will try and get you a photo and a shipping quote tomorrow. Had a super busy day today.

Thank you for the interest,
Thomas

Krex · 03-11-2015, 09:48 PM

If you have an extra lights on top of cab I am interested in lights housing and wiring

Krex · 03-11-2015, 09:48 PM

Please pm and shipping to 75023

DLTruck1973 · 03-12-2015, 04:37 PM

Quote:

Originally Posted by Krex

Please pm and shipping to 75023

Sorry but I have nothing at this time for Cab lights.

Thank you for the interest,
Thomas

02-24-2015, 09:00 PM	#126
pickupman96 Registered User Join Date: Sep 2008 Location: Danbury, Ct Posts: 49	Re: Parting 1972 C30 350/TH400 Are you willing to make some cuts on the cab? I need both b posts from the back of the cab trim to the bottom of the corner and about 1 ft in on the back. __________________ 72 Shortbed, fleetside, 4x4, 307,4spd. 55 second, 350, 4spd, almost done 77 K-20, 454, 4spd, plow truck 96 K-1500, 6 inch lift, 178k still going strong

02-24-2015, 10:02 PM	#128
pickupman96 Registered User Join Date: Sep 2008 Location: Danbury, Ct Posts: 49	Re: Parting 1972 C30 350/TH400 Solid corners would be a plus. The problem I have is that at some point the corners were replaced and they welded the entire replacement corner in. Now with that rotted off there is nothing left to weld to. The top of the bed had also hit the cab at some time leaving massive dents. Rather than have 15 different patches on this thing I would rather graft in one or two good pieces. __________________ 72 Shortbed, fleetside, 4x4, 307,4spd. 55 second, 350, 4spd, almost done 77 K-20, 454, 4spd, plow truck 96 K-1500, 6 inch lift, 178k still going strong

02-24-2015, 11:01 PM	#129
72 blue Registered User Join Date: Apr 2014 Location: Pell City, AL Posts: 86	Re: Parting 1972 C30 350/TH400 Thomas, Blue door panels any good ? Ship to 35125 Rick

02-25-2015, 10:05 AM	#132
mrf1002u Registered User Join Date: Feb 2015 Location: Yulee, Florida Posts: 142	Re: Parting 1972 C30 350/TH400 What rearend is in it?

02-25-2015, 10:24 AM	#133
pickupman96 Registered User Join Date: Sep 2008 Location: Danbury, Ct Posts: 49	Re: Parting 1972 C30 350/TH400 My zip is 06801 __________________ 72 Shortbed, fleetside, 4x4, 307,4spd. 55 second, 350, 4spd, almost done 77 K-20, 454, 4spd, plow truck 96 K-1500, 6 inch lift, 178k still going strong

03-11-2015, 01:50 PM	#142
HOTRODSBYCHIP Registered User Join Date: Sep 2013 Location: Birchwood TN Posts: 86	Re: Parting 1972 C30 350/TH400 Do you still have the center link?

03-11-2015, 04:39 PM	#144
72 blue Registered User Join Date: Apr 2014 Location: Pell City, AL Posts: 86	Re: Parting 1972 C30 350/TH400 Thomas, I got the door panels yesterday.....thanks for taking the time to package them up so good. They will be a good fit for my old ride. I'm not making it perfect, but, I'm making it a nice daily driver. I painted the inside of my cab today....... I still need other parts....By chance, do you guys have any nice used regulators? Thanks again Rick

03-11-2015, 09:48 PM	#148
Krex Registered User Join Date: Nov 2014 Location: Dallas Posts: 529	Re: Parting 1972 C30 350/TH400 If you have an extra lights on top of cab I am interested in lights housing and wiring

03-11-2015, 09:48 PM	#149
Krex Registered User Join Date: Nov 2014 Location: Dallas Posts: 529	Re: Parting 1972 C30 350/TH400 Please pm and shipping to 75023



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.