Bazooka's 63 build thread. - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Captainfab** · 09-07-2009, 01:21 AM

Nice fab work. I'm diggin the tube work.....Looks good.

64shortc10 · 09-08-2009, 12:54 AM

How much have you spent on the joints and shaft to hook up your steering?
I like how your truck is turning out!
Tony from Norcal

Bazooka · 09-08-2009, 01:21 AM

Quote:

Originally Posted by 64shortc10

How much have you spent on the joints and shaft to hook up your steering?
I like how your truck is turning out!
Tony from Norcal

I copy and pasted this from my post on another message board.

I had affordability in mind while choosing these parts.

http://www.jegs.com/

Billet U-Joint
Flaming River
3/4''-36 Box/Column
3/4'' DD Shaft

Part Number # 898-FR1715DD

$69.99

--------------------------------------------------------------------------------

Billet U-Joint
Flaming River
3/4'' DD Box/Column
3/4'' Shaft

Part Number # 898-FR1706DD

$69.99

--------------------------------------------------------------------------------

3/4'' Double-D x 18'' Long Steering Shaft
Borgeson
Part Number # 153-409418
$16.99

--------------------------------------------------------------------------------

NOTE: the steering hasnt been tested for binding issues yet but was told it would work by Jason at SD Not sure if I will need to buy another joint and use a idler (spherical rod end)

64shortc10 · 09-08-2009, 01:22 AM

Thank you!
Tony from Norcal

Bazooka · 09-12-2009, 05:06 PM

hmmm

OR

Apache63 · 09-12-2009, 05:19 PM

Quote:

Originally Posted by Bazooka

hmmm

OR

Looks very nice , cool work on the Chassis!!!! I like it!!!

BTW: I´m the Guy from Germany who wanted to buy your Truck last year , it was listed on the H.A.M.B.!!

Pat

c10Mang · 09-25-2009, 11:13 PM

Hows the ride coming? Can't wait to see this thing moving..

Bazooka · 09-26-2009, 12:07 AM

Quote:

Originally Posted by c10Mang

Hows the ride coming? Can't wait to see this thing moving..

Heres some pics from today. Says hes going to get going on it and try to get it done soon. we'll see

Bazooka · 09-28-2009, 02:51 PM

Joemomma1 · 09-28-2009, 09:21 PM

What shop is doing the fabbing?

1Bad62Pro/Street · 09-29-2009, 06:02 AM

Wicked Setup!

Bazooka · 09-29-2009, 04:20 PM

Quote:

Originally Posted by Joemomma1

What shop is doing the fabbing?

Ava Mae Hot Rods in Fresno used to be known as Method Motor Works. Used to be next door to The Choppin Block

jgh64pkup · 09-29-2009, 06:02 PM

is that bag mount going to be strong enough

Dinos63 · 09-29-2009, 07:48 PM

Duuuuuuuuuude very sic

Bazooka · 10-09-2009, 10:03 PM

64shortc10 · 10-09-2009, 10:58 PM

I like It! Have they started on the frontend yet? Do you plan on raising the bed floor to cover it all or leave it all open to show off the tube work! Keep up the progress and pics!
Tony from Norcal

choppedsled · 10-09-2009, 11:54 PM

I can appreciate the fabrication skills, impressive, but Im just not to keen on it. You'll have to carry some of that theme throughout the rest of the truck, or it'll just look like a confused experiment on the back of the chassis. What are you shooting for with the finished ride? A slick show truck, a slammed patina ride, or traditional ??? Just curious, and no disrespect intended.

**ChiefRocka** · 10-10-2009, 11:06 AM

Quote:

Originally Posted by choppedsled

I can appreciate the fabrication skills, impressive, but Im just not to keen on it. You'll have to carry some of that theme throughout the rest of the truck, or it'll just look like a confused experiment on the back of the chassis. What are you shooting for with the finished ride? A slick show truck, a slammed patina ride, or traditional ??? Just curious, and no disrespect intended.

Easy there with your Number 1 post....

Looking good so far.....

choppedsled · 10-10-2009, 01:09 PM

Quote:

Originally Posted by ChiefRocka

Easy there with your Number 1 post....

Looking good so far.....

Ya I know. 1st post but I've been a lurker here for a long while. I just picked up a late 62 short wide, big back window for my son. I love these trucks, my dad had several and I've been on the hunt for one for myself. My boy gets it cause I wanna see him in a cool old ride rather than a import.

So ya I know, like I said no disrespect. Just really curious how the whole trucks look will be. What was the thinking behind the design? Trust me I've had people question my building for good and bad over the years. I always like to know what people think. But I'll still build it my way.

I'll have my son hop on here and post some pics of the new purchase soon.....

ruffrida2005 · 10-10-2009, 03:23 PM

Bazooka looking good. Is all your tubing DOM? I'm just wondering if you can get away with using eletricweld on a daily for the link bars? Can someone chime in and give some insite?

PBFAB.COM · 10-10-2009, 10:00 PM

Quote:

Originally Posted by ruffrida2005

Bazooka looking good. Is all your tubing DOM? I'm just wondering if you can get away with using eletricweld on a daily for the link bars? Can someone chime in and give some insite?

It's NEVER a good idea to run an electric-weld tubing for a link bar. You'll see it done, but not by somebody who knows what they're doing.

The main reason being is that the welded seam will be a weak point under stress.

ruffrida2005 · 10-10-2009, 10:34 PM

That's what I was thinking Nate. I'm just having a hard time finding someone that sells DOM around me.

Bazooka · 10-10-2009, 10:43 PM

Quote:

Originally Posted by ruffrida2005

Bazooka looking good. Is all your tubing DOM? I'm just wondering if you can get away with using eletricweld on a daily for the link bars? Can someone chime in and give some insite?

Yes its all DOM. Link bars are DOM also

**Captainfab** · 10-11-2009, 12:13 AM

If you can't find DOM at a welding/fab shop check with EMJ and see if they have a location close to you.
http://www.emjmetals.com/

Quote:

Originally Posted by ruffrida2005

That's what I was thinking Nate. I'm just having a hard time finding someone that sells DOM around me.

ruffrida2005 · 10-11-2009, 12:24 AM

Quote:

Originally Posted by Captainfab

If you can't find DOM at a welding/fab shop check with EMJ and see if they have a location close to you.
http://www.emjmetals.com/

Thanks, nearest place is Dallas about 2 hours away. What would be the best for the tubes? 1.5 OD .120 wall?

09-07-2009, 01:21 AM	#126
Captainfab 60-66 Nut Join Date: Mar 2007 Location: Coeur d'Alene, Idaho Posts: 23,246	Re: Bazooka's 63 build thread. Nice fab work. I'm diggin the tube work.....Looks good. __________________ Power Steering Box Adapter Plates For Sale HERE Power Brake Booster Adapter Brackets For Sale '63-'66 HERE and '67-'72 HERE and '60-'62 HERE and "60-'62 with clutch HERE Rear Disc Brake Brackets For Sale. Impala SS calipers HERE Camaro Calipers HERE D52 Calipers HERE 6 Lug HERE Hydroboost Mounting Plates HERE

09-08-2009, 12:54 AM	#127
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: Bazooka's 63 build thread. How much have you spent on the joints and shaft to hook up your steering? I like how your truck is turning out! Tony from Norcal

09-08-2009, 01:22 AM	#129
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: Bazooka's 63 build thread. Thank you! Tony from Norcal

09-12-2009, 05:06 PM	#130
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread. hmmm OR

09-25-2009, 11:13 PM	#132
c10Mang Registered User Join Date: May 2008 Location: Venice, Ca Posts: 322	Re: Bazooka's 63 build thread. Hows the ride coming? Can't wait to see this thing moving..

09-28-2009, 02:51 PM	#134
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread.

09-28-2009, 09:21 PM	#135
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 813	Re: Bazooka's 63 build thread. What shop is doing the fabbing?

09-29-2009, 06:02 AM	#136
1Bad62Pro/Street "Where were you in '62?" Join Date: Jul 2004 Location: Cleveland County, North Cackalacky Posts: 5,013	Re: Bazooka's 63 build thread. Wicked Setup! __________________ PROJECT: "FULL METAL YELLOW JACKET" 1962 Chevy C-10 Stepside Shortbed Nostalgia Pro/Street Pickup Truck PROJECT: "FULL METAL YELLOW JACKET Build Thread What Are You Workin' On? - 1Bad62ChevyPickup PROJECT: "TYRANNORAMBLER REX" 1969 AMC Rambler American Nostalgia Pro/Street Youtube Channel: Father Son Projects Youtube Channel: 2TIMOTHY2FITHTEEN "North and South Carolina Folks Click Here!" (((( ~ I have Parts For Sale & Miscellaneous Stuff ~ )))) "Well being as there's no other place around the place, I reckon this must be the place, I reckon...Nyuk Nyuk Nyuk" -Curly Howard Ph.D.

09-29-2009, 06:02 PM	#138
jgh64pkup Sunburst C10!!! Join Date: Jan 2009 Location: Texas Posts: 2,560	Re: Bazooka's 63 build thread. is that bag mount going to be strong enough __________________ Gage 1967 C10 Shortbed Stepside

09-29-2009, 07:48 PM	#139
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Bazooka's 63 build thread. Duuuuuuuuuude very sic __________________ CHEVY ONLY... Nothin Else !

10-09-2009, 10:03 PM	#140
Bazooka Keepin it old school Join Date: Jul 2008 Location: Ca Posts: 672	Re: Bazooka's 63 build thread.

10-09-2009, 10:58 PM	#141
64shortc10 Registered User Join Date: Jan 2007 Location: Winters, Ca. Posts: 1,069	Re: Bazooka's 63 build thread. I like It! Have they started on the frontend yet? Do you plan on raising the bed floor to cover it all or leave it all open to show off the tube work! Keep up the progress and pics! Tony from Norcal

10-09-2009, 11:54 PM	#142
choppedsled Registered User Join Date: Jan 2009 Location: Sledsville Posts: 10	Re: Bazooka's 63 build thread. I can appreciate the fabrication skills, impressive, but Im just not to keen on it. You'll have to carry some of that theme throughout the rest of the truck, or it'll just look like a confused experiment on the back of the chassis. What are you shooting for with the finished ride? A slick show truck, a slammed patina ride, or traditional ??? Just curious, and no disrespect intended. Last edited by choppedsled; 10-09-2009 at 11:55 PM.

10-10-2009, 03:23 PM	#145
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Bazooka's 63 build thread. Bazooka looking good. Is all your tubing DOM? I'm just wondering if you can get away with using eletricweld on a daily for the link bars? Can someone chime in and give some insite? __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759

10-10-2009, 10:34 PM	#147
ruffrida2005 Member of the longbed union. Join Date: Feb 2009 Location: Killeen, Tx Posts: 2,158	Re: Bazooka's 63 build thread. That's what I was thinking Nate. I'm just having a hard time finding someone that sells DOM around me. __________________ Paul 88 GMC Crew Cab dually, 454/T400 64 LWB 400 HP 350/350T Bagged, under construction! Sold most of it! 92 S10 Iron Duke 5 speed, 5/7 drop for now. soon to be bagged. Sold http://67-72chevytrucks.com/vboard/s...59#post4637759



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.