CA Parting a 1967 GMC 1/2 great parts to be had - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

C/10 King · 05-28-2011, 05:06 PM

Okay, thanks anyway.

ortegamotor · 05-28-2011, 06:39 PM

M6Z Here are the pics of the grill, it a decent drive quality the splash guard is good as well. As for the top cross bar i think there is someone in front of you on that let me check first. TonyTony

**michael bustamante** · 05-28-2011, 07:18 PM

That door trim looks good. Ill take em and what's your price on the mirror?
Posted via Mobile Device

m6z · 05-28-2011, 08:50 PM

Quote:

Originally Posted by ortegamotor

M6Z Here are the pics of the grill, it a decent drive quality the splash guard is good as well. As for the top cross bar i think there is someone in front of you on that let me check first. TonyTony

Ok. Grill looks good I'll take it. Just let me know on the top cross bar.

2002yanks · 05-28-2011, 10:20 PM

thanks for the pics, but i think i will pass on the doors for now.

ortegamotor · 05-29-2011, 12:03 AM

Quote:

Originally Posted by 2002yanks

thanks for the pics, but i think i will pass on the doors for now.

you got it Yanks. Tony

**oldgold70c10** · 05-29-2011, 12:09 AM

Is the cab for sale? High or low hump? What's the condition of the floors, rockers, cowl, etc.?
Your a bit far, but your were the good stuff is.

ortegamotor · 05-29-2011, 12:29 AM

Quote:

Originally Posted by oldgold70c10

Is the cab for sale? High or low hump? What's the condition of the floors, rockers, cowl, etc.?
You're a bit far, but your were the good stuff is.

The cab is good. The gutters are solid no rust , the window frame is solid no rust , the cab corners are solid no rust . It just needs a set of rockers. it is a high hump the floors are good as well. $200.00 for the cab plus shipping $5000.00 JUST KIDDING !!! I don't know what shipping would cost for a cab. But it's here if you want it. Thanks. Tony

71swb4x4 · 05-29-2011, 03:39 PM

I didn't read through the whole thread. Do you have the bench seat? If so how is it? Would you ship it?

ortegamotor · 05-29-2011, 10:37 PM

here is an update to the 67 Custom fender badges and head lamp buckets trim rings and bulbs ready to install. the head lamps buckets are media blasted and painter semi-gloss black, the stainless trim rings are polished and ready to install i will only sell in a set of 4 @ $55 shipped . the Custom Badges are also $55.00 shipped. who ever was first on the badges need to get back to me soon. Thanks Tony

ortegamotor · 05-31-2011, 08:56 AM

so i still have both driver and pass side door shells , the cowl , the front windshield / rear glass, and the driver side fender.

Vintage Windmills · 05-31-2011, 09:03 AM

Any chance you could get the doors to cloverdale, CA? North of the bay area 1 hour?

twinplug · 05-31-2011, 09:19 AM

Need drivers side vent window frame complete assembly. 66604 zip code.

ortegamotor · 05-31-2011, 12:32 PM

Quote:

Originally Posted by Vintage Windmills

Any chance you could get the doors to cloverdale, CA? North of the bay area 1 hour?

I could ship them GreyHound for you. i'm 2 hours east from the Bay Area so i would be about 3 hours each way to Cloverdale. let me know . these doors are really staring and rust free with a small speak hole . Tony

ortegamotor · 05-31-2011, 10:19 PM

I still have both doors , they're straight and rust free..... i also have the driver side fender and the cowl. the bench seat and the cab are also for sale.

Vintage Windmills · 05-31-2011, 10:24 PM

Tony, thanks but I should probably hold out for something without any holes. Take care, Jud

ortegamotor · 05-31-2011, 10:26 PM

Quote:

Originally Posted by Vintage Windmills

Tony, thanks but I should probably hold out for something without any holes. Take care, Jud

you got it Jud.

chevykevy · 05-31-2011, 11:58 PM

Looking for an ash tray runner, the indash part to work with the attached ashtray I just had painted. The runers I have either have an arch to them or a ball bearing system. Mine is just a straight groove. ^7 or 68 I think. Does it look like the runner in the dash of you 67 GMC will work with the pictured ash tray?

ortegamotor · 06-01-2011, 09:14 AM

Quote:

Originally Posted by chevykevy

Looking for an ash tray runner, the indash part to work with the attached ashtray I just had painted. The runers I have either have an arch to them or a ball bearing system. Mine is just a straight groove. ^7 or 68 I think. Does it look like the runner in the dash of you 67 GMC will work with the pictured ash tray?

i'll check on that ash tray first thing this morning. Tony

ortegamotor · 06-02-2011, 12:33 PM

Quote:

Originally Posted by chevykevy

Looking for an ash tray runner, the indash part to work with the attached ashtray I just had painted. The runers I have either have an arch to them or a ball bearing system. Mine is just a straight groove. ^7 or 68 I think. Does it look like the runner in the dash of you 67 GMC will work with the pictured ash tray?

so i checked it out and i do have one the only problem is that it's spot welded to the dash face. i would have to cut the dash. i was planning on selling the dash. Tony

chevykevy · 06-02-2011, 03:12 PM

OK,
Not a problem. I will find another but wanted to know if it appears as though the spot weolding is a factory thing or done later. My concern is that when I do find the runner system I will have to weld it to the dash?

DesertCat · 06-02-2011, 03:16 PM

Quote:

Originally Posted by ortegamotor

so i still have both driver and pass side door shells , the cowl , the front windshield / rear glass, and the driver side fender.

So, does this mean everything else is gone? Have no clue, maybe a lot going on with PMs or such. But there are several unanswered posts (mine included)

ortegamotor · 06-02-2011, 06:21 PM

Quote:

Originally Posted by DesertCat

So, does this mean everything else is gone? Have no clue, maybe a lot going on with PMs or such. But there are several unanswered posts (mine included)

hey there, sent you a pm. here is a list of what i still have
both door shells
d/s fender
cab
front and back glass
grill
all 3 mirrors
inside chrome door trim
let me know

Evan68chevy · 06-03-2011, 04:31 PM

Quick question. Would you be willing to sell just the transmission high hump? And if so How much? I live in Roseville and have been looking for one for a reasonable price. Thank you in advance for the response and sorry if you have already answered this question.
Evan

ortegamotor · 06-03-2011, 05:31 PM

Quote:

Originally Posted by Evan68chevy

Quick question. Would you be willing to sell just the transmission high hump? And if so How much? I live in Roseville and have been looking for one for a reasonable price. Thank you in advance for the response and sorry if you have already answered this question.
Evan

hey Evan, it's your for $25. give me a call @ 530 888 9606

05-28-2011, 05:06 PM	#126
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: Parting a 1967 GMC 1/2 great parts to be had Okay, thanks anyway. __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze"

05-28-2011, 06:39 PM	#127
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: Parting a 1967 GMC 1/2 great parts to be had M6Z Here are the pics of the grill, it a decent drive quality the splash guard is good as well. As for the top cross bar i think there is someone in front of you on that let me check first. TonyTony Attached Images

05-28-2011, 07:18 PM	#128
michael bustamante Senior Member Join Date: Sep 2007 Location: Albuquerque NM Posts: 7,836	Re: Parting a 1967 GMC 1/2 great parts to be had That door trim looks good. Ill take em and what's your price on the mirror? Posted via Mobile Device __________________ 1967custom

05-28-2011, 10:20 PM	#130
2002yanks Registered User Join Date: Sep 2010 Location: Auburn NY Posts: 1,470	Re: Parting a 1967 GMC 1/2 great parts to be had thanks for the pics, but i think i will pass on the doors for now.

05-29-2011, 12:09 AM	#132
oldgold70c10 Who's got steelies? Join Date: Feb 2006 Location: Morrison, Oklahoma Posts: 1,023	Re: Parting a 1967 GMC 1/2 great parts to be had Is the cab for sale? High or low hump? What's the condition of the floors, rockers, cowl, etc.? Your a bit far, but your were the good stuff is. __________________ 1969 C10 LWB W/ 250 I6 & 3spd 1970 C10 with '67 small window cab, 68 front end, blue; 305/TH350, 3.08 limited slip rear end, manual brakes, power steering; & 4-wheel drums-My daily driver. 1975 Chevelle Malibu Classic Coupe 350/th350 mint green 1970 C20 Suburban 350/700R4 4.10 gearing green & white 1978 Big 10 Silverado 350/th350, working ac, 2 tone blue-My summer daily driver 1983 GMC 1500 Sierra 305/SM465 2.73 rear end How to add a trip odometer to your 67-72 stock speedometer How to rebuild your Q-Jet My Truck Page My Youtube Channel

05-29-2011, 03:39 PM	#134
71swb4x4 Senior Member Join Date: Nov 2003 Location: Brookings, SD Posts: 10,497	Re: Parting a 1967 GMC 1/2 great parts to be had I didn't read through the whole thread. Do you have the bench seat? If so how is it? Would you ship it? __________________ Some people are like slinkies, they aren't good for anything, but you can't help but smile when you see one tumble down the stairs.

05-29-2011, 10:37 PM	#135
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: Parting a 1967 GMC 1/2 great parts to be had here is an update to the 67 Custom fender badges and head lamp buckets trim rings and bulbs ready to install. the head lamps buckets are media blasted and painter semi-gloss black, the stainless trim rings are polished and ready to install i will only sell in a set of 4 @ $55 shipped . the Custom Badges are also $55.00 shipped. who ever was first on the badges need to get back to me soon. Thanks Tony Attached Images

05-31-2011, 08:56 AM	#136
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: Parting a 1967 GMC 1/2 great parts to be had so i still have both driver and pass side door shells , the cowl , the front windshield / rear glass, and the driver side fender.

05-31-2011, 09:03 AM	#137
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting a 1967 GMC 1/2 great parts to be had Any chance you could get the doors to cloverdale, CA? North of the bay area 1 hour? __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-31-2011, 09:19 AM	#138
twinplug Registered User Join Date: Dec 2009 Location: Kansas City,Kansas Posts: 1	Re: Parting a 1967 GMC 1/2 great parts to be had Need drivers side vent window frame complete assembly. 66604 zip code.

05-31-2011, 10:19 PM	#140
ortegamotor Registered User Join Date: Jun 2006 Location: auburn california Posts: 1,147	Re: Parting a 1967 GMC 1/2 great parts to be had I still have both doors , they're straight and rust free..... i also have the driver side fender and the cowl. the bench seat and the cab are also for sale.

05-31-2011, 10:24 PM	#141
Vintage Windmills Vintage 4x4s Join Date: Sep 2010 Location: Prior Lake, MN Posts: 4,305	Re: Parting a 1967 GMC 1/2 great parts to be had Tony, thanks but I should probably hold out for something without any holes. Take care, Jud __________________ 67 GMC K1500 Custom- 305V6 SM420, PTO, Ram Assist, yellow (the outcast) (project period correct upgrades) 67 GMC C2500 351V6 TH400, AC, PS, PB (can't decide what to do with. Update, decided to keep and will restore ) 86 CHV K30 502 th400, apple red NEW 71 CHV K20 350 SM465, ochre (saved work truck) 71 CHV K20 292 SM465, white, tach, PTO, (future project) 72 CHV K20 350 350th, medium blue (project stocker) 01 CHV K2500hd crew, indigo blue ^3 dont run and the others don't see winter either '86 K30 Cummins "Fireside" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=649649 '71 K20 "get driveable" thread: http://67-72chevytrucks.com/vboard/s...d.php?t=590642 '72 K20 Build Thread: http://67-72chevytrucks.com/vboard/s...=493477&page=6

05-31-2011, 11:58 PM	#143
chevykevy Registered User Join Date: Jan 2004 Location: Wyoming Posts: 641	Re: Parting a 1967 GMC 1/2 great parts to be had Looking for an ash tray runner, the indash part to work with the attached ashtray I just had painted. The runers I have either have an arch to them or a ball bearing system. Mine is just a straight groove. ^7 or 68 I think. Does it look like the runner in the dash of you 67 GMC will work with the pictured ash tray? Attached Images

06-02-2011, 03:12 PM	#146
chevykevy Registered User Join Date: Jan 2004 Location: Wyoming Posts: 641	Re: Parting a 1967 GMC 1/2 great parts to be had OK, Not a problem. I will find another but wanted to know if it appears as though the spot weolding is a factory thing or done later. My concern is that when I do find the runner system I will have to weld it to the dash?

06-03-2011, 04:31 PM	#149
Evan68chevy Registered User Join Date: Mar 2011 Location: Roseville Ca Posts: 74	Re: Parting a 1967 GMC 1/2 great parts to be had Quick question. Would you be willing to sell just the transmission high hump? And if so How much? I live in Roseville and have been looking for one for a reasonable price. Thank you in advance for the response and sorry if you have already answered this question. Evan



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.