Billet Aluminum Radio Plate - Gauging Interest for another production run - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

67ctener · 03-28-2013, 03:32 PM

I'll take one when they cOme available
Posted via Mobile Device

67ctener · 03-28-2013, 03:35 PM

I'd like a polished one
Posted via Mobile Device

mfm3 · 03-30-2013, 05:13 AM

I'm sure this question has been asked and answered, but...does anyone make a similar bezel for 60-66 C-10s?

jeffg1010 · 03-30-2013, 03:43 PM

Did any ship yet?
Posted via Mobile Device

ryanroo · 03-30-2013, 04:31 PM

Quote:

Originally Posted by mahanian

Just an update, my polisher is pretty backed up so he won't have them complete till Wednesday of next week. Fasteners came in today so I have everything else ready!

I'm still waiting on several payments, I'll start sending out PM's this weekend as reminders. Thanks to all those that have paid!

This was Thursday. i ordered a non polished but have not heard if it shipped. Jared mentioned he would be out of town, so i don't know if he will be able to answer.

jeffg1010 · 03-30-2013, 08:17 PM

Oh, ok... I thought the original run had already been polished. No big deal, I was just trying to keep up with it
Posted via Mobile Device

CTENTA1 · 04-01-2013, 12:18 PM

Paid in Full.

March 22nd

1) Unpolished

jetfixr · 04-02-2013, 01:27 PM

Bought the stereo already, can't wait to finally have some tunes in my truck. How is everyone planning on cutting the radio opening? I have seen some hack jobs, but I want to do it right. I thought maybe a cut-off wheel or a dremmel, but I don't want to blister the paint around the opening due to the heat caused by the friction of the wheel. Tin snips might distort the metal a bit. I have never used a nibbler though, do they make a clean cut?

yellowGT · 04-02-2013, 02:48 PM

Put me down for one polished. I'm at work so ill pay when I get home thru PayPal.
Posted via Mobile Device

CParnell · 04-03-2013, 12:21 PM

Paid in full, 2 polished.

mahanian · 04-03-2013, 11:11 PM

The parts are polished and I'll be back in town tomorrow so I'll pick them up. I'll try and get them all boxed up and ready to ship on Saturday. I didn't ship the unpolished ones out yet because I was waiting on the stainless steel fasteners to arrive so they will go out at the same time.

Thanks for the patience, I'm actually getting them done a couple weeks faster than I had originally quoted

Stickman · 04-04-2013, 12:00 PM

Mahanian

What is my balance that I owe you ? Also where are you in AZ, if your anywhere close to Chandler maybe I can pick it up and save you the hassle of shipping.
Posted via Mobile Device

mahanian · 04-04-2013, 12:11 PM

Hey Kirk,
I'm in Chandler as well, if you want to meet up this weekend that works. I'll knock off the shipping charge. Did you take a look at the unpolished pictures? Just want to make sure you still want the unpolished version with the tooling marks. Let me know either way.

Stickman · 04-04-2013, 03:50 PM

Jared
I think I will take you up on your offer and go polished because I'm either gonna paint it or anodize it. How much more do I owe you and I'll pay you cash when we meet up unless you would rather have pay pal. I live between Az Ave and Alma School north and south and Warner and Ray east and west.
Posted via Mobile Device

mahanian · 04-04-2013, 05:58 PM

Quote:

Originally Posted by Stickman

Jared
I think I will take you up on your offer and go polished because I'm either gonna paint it or anodize it. How much more do I owe you and I'll pay you cash when we meet up unless you would rather have pay pal. I live between Az Ave and Alma School north and south and Warner and Ray east and west.
Posted via Mobile Device

PM sent

**rob32472** · 04-04-2013, 06:11 PM

paypal sent for a polished one!

jetfixr · 04-09-2013, 11:02 AM

What the status on the polished plates, have they shipped?

mahanian · 04-09-2013, 02:18 PM

I started shipping some of them today, I wasn't 100% happy with the polish job so I've been doing a final polish on each one by hand, which is taking me about 20 minutes per plate but they are now up to my perfection standards. I'm hoping to get them all done over the next few days if I can set aside a few hours.

~Whitey~ · 04-09-2013, 07:00 PM

Can't wait. Thanks for the update. :-)
Posted via Mobile Device

Hatch guy · 04-09-2013, 10:02 PM

I didn't check back here for awhile is it to late to reserve one. Let me know and ill PayPal you the money. Polished please
Posted via Mobile Device

mahanian · 04-10-2013, 01:13 PM

Sorry, I didn't hear back from you when I PM'd you for a deposit so I don't have one reserved for you. There is a list of people waiting for someone to back out, I'll add you to that list and let you know if one comes available. If I do another run I'll let you know as well.

Smoothride · 04-10-2013, 01:19 PM

good to hear some of them left yesterday, hope mine was one of them...lol

CTENTA1 · 04-10-2013, 01:53 PM

Mine was not polished, Did all the non polished ship out yet?

jetfixr · 04-11-2013, 09:48 AM

cool, thanks for the update

mahanian · 04-12-2013, 03:10 PM

Another update, I'm getting 2-3 repolished a day before my forearms give out so I'm shipping a little slower than I planned but still planning to have them all shipped by the "1 month from order placement" that I quoted. I appreciate everyone's patience, you each should get an email from Paypal or USPS letting you know when your part shipped

03-28-2013, 03:32 PM	#126
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I'll take one when they cOme available Posted via Mobile Device __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

03-28-2013, 03:35 PM	#127
67ctener Registered User Join Date: Oct 2012 Location: Arlington Washington Posts: 1,808	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I'd like a polished one Posted via Mobile Device __________________ Scott 67 c10 sold 89 c1500 90 k2500 91 s10 #chevyonly

03-30-2013, 05:13 AM	#128
mfm3 Registered User Join Date: Feb 2013 Location: DFW TX Posts: 132	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I'm sure this question has been asked and answered, but...does anyone make a similar bezel for 60-66 C-10s?

03-30-2013, 03:43 PM	#129
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,675	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Did any ship yet? Posted via Mobile Device __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

03-30-2013, 08:17 PM	#131
jeffg1010 Registered User Join Date: Aug 2010 Location: Mooresville, NC Posts: 2,675	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Oh, ok... I thought the original run had already been polished. No big deal, I was just trying to keep up with it Posted via Mobile Device __________________ Jeff 1972 Blazer CST 2wd- My son Sam's Project "S" Project "S" 1970 Suburban - SOLD "One Bad Burb" Photobucket Album 1986 C30 Crewcab - 63K original miles, original paint Members I have met: mikey531, gcburdic, bashed, burbman69, TonyPieras, Blazester, GCncsuHD, custombuilt67-72, tsnow678, highrpm, PanelDeland, tanman722001, 47thriftmaster, babyblueoval, 68stepbed, JesseWebb, Andy4639, xs-style, TobyArnot, BigOrange, frednoah, brn_agn, k5hart, Graham57a, bhelton, AJohn6, SilverC10, 69CST, '71 Flame, RaceAGMC, Liz, Josh, MattPSU, 68corvair, Chevy350V8, mdeal, ccrorymc, mrhurt73, dmxxpert, Custom68, 84GMC, BionicABs1, BigBlockBurris, Ebfabman, ATP...

04-01-2013, 12:18 PM	#132
CTENTA1 Registered 1971 K5 Join Date: Dec 2008 Location: SO.CEN.CAL Posts: 428	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Paid in Full. March 22nd 1) Unpolished

04-02-2013, 01:27 PM	#133
jetfixr Registered User Join Date: Jan 2005 Location: Central CA Posts: 86	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Bought the stereo already, can't wait to finally have some tunes in my truck. How is everyone planning on cutting the radio opening? I have seen some hack jobs, but I want to do it right. I thought maybe a cut-off wheel or a dremmel, but I don't want to blister the paint around the opening due to the heat caused by the friction of the wheel. Tin snips might distort the metal a bit. I have never used a nibbler though, do they make a clean cut?

04-02-2013, 02:48 PM	#134
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Put me down for one polished. I'm at work so ill pay when I get home thru PayPal. Posted via Mobile Device __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

04-03-2013, 12:21 PM	#135
CParnell Registered User Join Date: Feb 2009 Location: Calgary, AB, Canada Posts: 156	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Paid in full, 2 polished. __________________ 1968 GMC 910 Project Tommy 1974 Olds Cutlass

04-03-2013, 11:11 PM	#136
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run The parts are polished and I'll be back in town tomorrow so I'll pick them up. I'll try and get them all boxed up and ready to ship on Saturday. I didn't ship the unpolished ones out yet because I was waiting on the stainless steel fasteners to arrive so they will go out at the same time. Thanks for the patience, I'm actually getting them done a couple weeks faster than I had originally quoted __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

04-04-2013, 12:00 PM	#137
Stickman Registered User Join Date: Mar 2008 Location: Chandler,AZ Posts: 571	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Mahanian What is my balance that I owe you ? Also where are you in AZ, if your anywhere close to Chandler maybe I can pick it up and save you the hassle of shipping. Posted via Mobile Device

04-04-2013, 12:11 PM	#138
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Hey Kirk, I'm in Chandler as well, if you want to meet up this weekend that works. I'll knock off the shipping charge. Did you take a look at the unpolished pictures? Just want to make sure you still want the unpolished version with the tooling marks. Let me know either way. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

04-04-2013, 03:50 PM	#139
Stickman Registered User Join Date: Mar 2008 Location: Chandler,AZ Posts: 571	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Jared I think I will take you up on your offer and go polished because I'm either gonna paint it or anodize it. How much more do I owe you and I'll pay you cash when we meet up unless you would rather have pay pal. I live between Az Ave and Alma School north and south and Warner and Ray east and west. Posted via Mobile Device

04-04-2013, 06:11 PM	#141
rob32472 Registered User Join Date: May 2007 Location: dallas ga Posts: 1,503	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run paypal sent for a polished one!

04-09-2013, 11:02 AM	#142
jetfixr Registered User Join Date: Jan 2005 Location: Central CA Posts: 86	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run What the status on the polished plates, have they shipped?



Register or Log In To remove these advertisements.

04-09-2013, 02:18 PM	#143
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I started shipping some of them today, I wasn't 100% happy with the polish job so I've been doing a final polish on each one by hand, which is taking me about 20 minutes per plate but they are now up to my perfection standards. I'm hoping to get them all done over the next few days if I can set aside a few hours. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

04-09-2013, 07:00 PM	#144
~Whitey~ Registered User Join Date: Jun 2011 Location: Springfield, MO Posts: 677	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Can't wait. Thanks for the update. :-) Posted via Mobile Device __________________ Jimmy .69SWB Build.

04-09-2013, 10:02 PM	#145
Hatch guy Registered User Join Date: Sep 2012 Location: West Paducah,KY Posts: 26	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run I didn't check back here for awhile is it to late to reserve one. Let me know and ill PayPal you the money. Polished please Posted via Mobile Device

04-10-2013, 01:13 PM	#146
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Sorry, I didn't hear back from you when I PM'd you for a deposit so I don't have one reserved for you. There is a list of people waiting for someone to back out, I'll add you to that list and let you know if one comes available. If I do another run I'll let you know as well. __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

04-10-2013, 01:19 PM	#147
Smoothride Registered User Join Date: Sep 2007 Location: Houston, tx Posts: 100	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run good to hear some of them left yesterday, hope mine was one of them...lol

04-10-2013, 01:53 PM	#148
CTENTA1 Registered 1971 K5 Join Date: Dec 2008 Location: SO.CEN.CAL Posts: 428	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Mine was not polished, Did all the non polished ship out yet?

04-11-2013, 09:48 AM	#149
jetfixr Registered User Join Date: Jan 2005 Location: Central CA Posts: 86	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run cool, thanks for the update

04-12-2013, 03:10 PM	#150
mahanian C10 addict Join Date: Apr 2006 Location: Arizona Posts: 2,432	Re: Billet Aluminum Radio Plate - Gauging Interest for another production run Another update, I'm getting 2-3 repolished a day before my forearms give out so I'm shipping a little slower than I planned but still planning to have them all shipped by the "1 month from order placement" that I quoted. I appreciate everyone's patience, you each should get an email from Paypal or USPS letting you know when your part shipped __________________ Jared 67 C10 CST Short Fleet Big Window 65 C10 Custom Short Fleet Big Window 67 Camaro RS

Register or Log In To remove these advertisements.