OR Misc parts from a few trucks - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

1972_K5 · 05-27-2013, 11:08 PM

I was looking for an ashtray assembly (med olive if you got it), a lighter, dome light lense, passenger floor vent pull, driver's side tailgate link (med olive if you have it), passenger defrost vent, and a non tilt turn signal lever.

**blazercrazy70** · 05-28-2013, 01:30 AM

Looking for a good tight tilt column if you have one

JPSAUTO · 05-28-2013, 02:26 PM

In the pics, the throttle linkage is it available and for a big block, all I need is the rod itself. If available I'll take it. Paypal OK? shipped to 46514. Thanks

**tll74** · 06-02-2013, 02:59 AM

Quote:

Originally Posted by 1972_K5

I was looking for an ashtray assembly (med olive if you got it), a lighter, dome light lense, passenger floor vent pull, driver's side tailgate link (med olive if you have it), passenger defrost vent, and a non tilt turn signal lever.

Quote:

Originally Posted by blazercrazy70

Looking for a good tight tilt column if you have one

Quote:

Originally Posted by JPSAUTO

In the pics, the throttle linkage is it available and for a big block, all I need is the rod itself. If available I'll take it. Paypal OK? shipped to 46514. Thanks

Guys, Just back online after a couples weeks of being sick and vacation. I'll check on your request soon.
Thanks, Tom

JPSAUTO · 06-06-2013, 05:30 AM

Tom,
Couple of other needed parts. Radio to speaker wiring, radio brackets and spacer for the tuner side of the radio, have cups and knobs just need the spacer. Thanks John

altunaa · 11-19-2013, 11:22 AM

Hi, do you still have the wiper motor Can you post some pics?

**tll74** · 11-24-2013, 01:55 PM

Quote:

Originally Posted by JPSAUTO

Tom,
Couple of other needed parts. Radio to speaker wiring, radio brackets and spacer for the tuner side of the radio, have cups and knobs just need the spacer. Thanks John

Some how I totally dropped the ball on this one. I must have missed your post. If your still around I have it all including the throttle rod. LMK

Quote:

Originally Posted by altunaa

Hi, do you still have the wiper motor Can you post some pics?

I have about 50 of these wiper motors. If your still up for one let me know and I'll post pics. LMK

Just back from a 10 hunting trip and just now catching up. Thanks, Tom

JPSAUTO · 11-25-2013, 06:32 AM

Tom I found the radio parts, but still need the throttle rod. Also need BB exhaust hangers.

**70CHEVYBB** · 12-04-2013, 11:29 PM

do you still have a sb shroud?

**tll74** · 12-06-2013, 05:43 PM

Quote:

Originally Posted by JPSAUTO

Tom I found the radio parts, but still need the throttle rod. Also need BB exhaust hangers.

I have the throttle rod on a 70 402 truck. What year of exhaust hangers do you want?

Quote:

Originally Posted by 70CHEVYBB

do you still have a sb shroud?

Yes I do.

Thanks, Tom

**70CHEVYBB** · 12-06-2013, 10:23 PM

how much shipped to Peoria IL any cracks??

JPSAUTO · 12-07-2013, 06:30 AM

Exhaust hangers for a 69, or 70 BB, if you have them and throttle rod price + shipping to 46514. Payment thru paypal or ?. Thanks John

**gmc 2500 4x4** · 12-07-2013, 12:41 PM

i need dark green 3rd person center belts if ya have some, and any BB linkage from motor to cab

**tll74** · 12-07-2013, 02:13 PM

Quote:

Originally Posted by 70CHEVYBB

how much shipped to Peoria IL any cracks??

18.85 shipping, No cracks and very nice condition. I have many to choose from. Thanks, Tom

**tll74** · 12-07-2013, 02:25 PM

Quote:

Originally Posted by JPSAUTO

Exhaust hangers for a 69, or 70 BB, if you have them and throttle rod price + shipping to 46514. Payment thru paypal or ?. Thanks John

20.00 shipped on the throttle rod. I should have the exhaust hangers on the same 1970 truck but it would be some time before I could get to them. I'll take a look at them and report back.

Quote:

Originally Posted by gmc 2500 4x4

i need dark green 3rd person center belts if ya have some, and any BB linkage from motor to cab

I'll look for a extra belt. What year of truck do you have for the linkage? Are you talking about the throttle rod?

Thanks, Tom

JPSAUTO · 12-07-2013, 04:15 PM

Tom I'll take the rod, let me know on the brackets. Thanks John

**gmc 2500 4x4** · 12-08-2013, 07:56 AM

Quote:

Originally Posted by tll74

20.00 shipped on the throttle rod. I should have the exhaust hangers on the same 1970 truck but it would be some time before I could get to them. I'll take a look at them and report back.

I'll look for a extra belt. What year of truck do you have for the linkage? Are you talking about the throttle rod?

Thanks, Tom

im sorry i meant BB manual linkage,motor to frame, and clutch rod, its a '71 cab, ill check but i think linkage is still on the carb.

**tll74** · 12-08-2013, 01:20 PM

Quote:

Originally Posted by gmc 2500 4x4

im sorry i meant BB manual linkage,motor to frame, and clutch rod, its a '71 cab, ill check but i think linkage is still on the carb.

Ok so the bellcrank (Z-bar), the clutch rod from the bellcrank to the release fork or the rod from the clutch pedal to the bellcrank? Do you need the pivot ball that mounts to the engine?

**gmc 2500 4x4** · 12-08-2013, 02:16 PM

z-bar,frame mount, both rods,and ball on motor, i think its a bracket on motor? as for a throttle cable im thinkin i need a 4x4 one. i bought a '71 402 and the cable is still there on carb. but i think 4x4 is different

**tll74** · 12-10-2013, 02:03 AM

Quote:

Originally Posted by gmc 2500 4x4

z-bar,frame mount, both rods,and ball on motor, i think its a bracket on motor? as for a throttle cable im thinkin i need a 4x4 one. i bought a '71 402 and the cable is still there on carb. but i think 4x4 is different

I should have all of the clutch linkage. 65.00 plus shipping on the clutch linkage. I'll look at my driver 71 4x4 with a 4sp to confirm I have all the correct parts. As for the throttle cable, 402's never came in 4x4's. The sbc V8 engines in 4x4's were moved back compared to a 2wd. Therfor the cable is 4x4 only but with a 402 the 2wd cable may work better as the carb is futher forward due to the bigger engine. The short sbc 4x4 cable may be to short. Maybe some one has done this and will chime in. Thanks, Tom

**gmc 2500 4x4** · 12-10-2013, 06:07 AM

Quote:

Originally Posted by tll74

I should have all of the clutch linkage. 65.00 plus shipping on the clutch linkage. I'll look at my driver 71 4x4 with a 4sp to confirm I have all the correct parts. As for the throttle cable, 402's never came in 4x4's. The sbc V8 engines in 4x4's were moved back compared to a 2wd. Therfor the cable is 4x4 only but with a 402 the 2wd cable may work better as the carb is futher forward due to the bigger engine. The short sbc 4x4 cable may be to short. Maybe some one has done this and will chime in. Thanks, Tom

ok on linkage if its BB, yup my truck is '69 and had the 350 throttle rod but i went with a '71 cab and its gas peddle also. i'll make it work...

JP238 · 12-10-2013, 09:09 AM

Rear view mirror still for available?

**tll74** · 12-11-2013, 03:26 AM

Quote:

Originally Posted by gmc 2500 4x4

ok on linkage if its BB, yup my truck is '69 and had the 350 throttle rod but i went with a '71 cab and its gas peddle also. i'll make it work...

Ok, I'll get a look at the linkage.

Quote:

Originally Posted by JP238

Rear view mirror still for available?

Not sure, I'll look to see if I still have it.

Thanks, Tom

slowtruck · 12-11-2013, 10:47 PM

Do you have the side trim for a 67-68?

**67carry-all** · 12-12-2013, 10:01 AM

Hi Tom - wonder if you might have the following, all for '67

1 - set of blue, unbroken defroster vents
2 - set of chrome inner door panel retaining strips
3 - pass. side wing window assy. with glass, rubber, etc in good shape
4 - set of "10" fender emblems in good driver condition

Thanks,

Ben

05-27-2013, 11:08 PM	#126
1972_K5 Registered User Join Date: Apr 2004 Location: Nampa, Idaho Posts: 119	Re: Misc parts from a few trucks I was looking for an ashtray assembly (med olive if you got it), a lighter, dome light lense, passenger floor vent pull, driver's side tailgate link (med olive if you have it), passenger defrost vent, and a non tilt turn signal lever. __________________ 1972 K5 CST

05-28-2013, 01:30 AM	#127
blazercrazy70 Senior Member Join Date: Sep 2006 Location: illinois Posts: 516	Re: Misc parts from a few trucks Looking for a good tight tilt column if you have one

05-28-2013, 02:26 PM	#128
JPSAUTO Registered User Join Date: Feb 2004 Location: Indiana Posts: 158	Re: Misc parts from a few trucks In the pics, the throttle linkage is it available and for a big block, all I need is the rod itself. If available I'll take it. Paypal OK? shipped to 46514. Thanks

06-06-2013, 05:30 AM	#130
JPSAUTO Registered User Join Date: Feb 2004 Location: Indiana Posts: 158	Re: Misc parts from a few trucks Tom, Couple of other needed parts. Radio to speaker wiring, radio brackets and spacer for the tuner side of the radio, have cups and knobs just need the spacer. Thanks John

11-19-2013, 11:22 AM	#131
altunaa Registered User Join Date: Jan 2006 Location: Uruguay Posts: 101	Re: Misc parts from a few trucks Hi, do you still have the wiper motor Can you post some pics?

11-25-2013, 06:32 AM	#133
JPSAUTO Registered User Join Date: Feb 2004 Location: Indiana Posts: 158	Re: Misc parts from a few trucks Tom I found the radio parts, but still need the throttle rod. Also need BB exhaust hangers.

12-04-2013, 11:29 PM	#134
70CHEVYBB Senior Member Join Date: Feb 2012 Location: chillicothe, illinois Posts: 688	Re: Misc parts from a few trucks do you still have a sb shroud?

12-06-2013, 10:23 PM	#136
70CHEVYBB Senior Member Join Date: Feb 2012 Location: chillicothe, illinois Posts: 688	Re: Misc parts from a few trucks how much shipped to Peoria IL any cracks??

12-07-2013, 06:30 AM	#137
JPSAUTO Registered User Join Date: Feb 2004 Location: Indiana Posts: 158	Re: Misc parts from a few trucks Exhaust hangers for a 69, or 70 BB, if you have them and throttle rod price + shipping to 46514. Payment thru paypal or ?. Thanks John

12-07-2013, 12:41 PM	#138
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: Misc parts from a few trucks i need dark green 3rd person center belts if ya have some, and any BB linkage from motor to cab

12-07-2013, 04:15 PM	#141
JPSAUTO Registered User Join Date: Feb 2004 Location: Indiana Posts: 158	Re: Misc parts from a few trucks Tom I'll take the rod, let me know on the brackets. Thanks John

12-08-2013, 02:16 PM	#144
gmc 2500 4x4 Senior Member Join Date: Mar 2012 Location: ripley ny Posts: 2,894	Re: Misc parts from a few trucks z-bar,frame mount, both rods,and ball on motor, i think its a bracket on motor? as for a throttle cable im thinkin i need a 4x4 one. i bought a '71 402 and the cable is still there on carb. but i think 4x4 is different Last edited by gmc 2500 4x4; 12-09-2013 at 07:55 AM.

12-10-2013, 09:09 AM	#147
JP238 Registered User Join Date: Nov 2013 Location: Ocean Springs, MS Posts: 43	Re: Misc parts from a few trucks Rear view mirror still for available?

12-11-2013, 10:47 PM	#149
slowtruck Registered User Join Date: Feb 2007 Location: Cabot AR. Posts: 126	Re: Misc parts from a few trucks Do you have the side trim for a 67-68?

12-12-2013, 10:01 AM	#150
67carry-all Senior Member Join Date: Jul 2008 Location: Central Coast, CA Posts: 257	Re: Misc parts from a few trucks Hi Tom - wonder if you might have the following, all for '67 1 - set of blue, unbroken defroster vents 2 - set of chrome inner door panel retaining strips 3 - pass. side wing window assy. with glass, rubber, etc in good shape 4 - set of "10" fender emblems in good driver condition Thanks, Ben



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.