KS Parting out a 72 chevy 402 BB 1/2 ton now - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

teeitup · 06-25-2014, 04:08 PM

Bruce, I'll try to get a quote tonight after I get home from my boys ball game. Thanks Randy

waylonbud · 07-03-2014, 11:51 AM

Randy,
I got booster set-up yesterday. Thank you
Waylon

Geos 72 · 07-03-2014, 05:52 PM

Hi Randy, I'm looking for a radiator shroud for my 72 Chevy C10 350.

teeitup · 07-03-2014, 06:01 PM

Waylon, glad it got there safely, Thanks

Geos 72, I may have out in a truck I just bought, I will look in morning.

Thanks

Geos 72 · 07-03-2014, 06:14 PM

Thanks Randy, I'll check tomorrow. George

teeitup · 07-04-2014, 04:24 PM

George, sorry its broke badly on the bottom side

Geos 72 · 07-04-2014, 08:33 PM

Hi Randy, that was disappointing but I'll keep looking. Thank you very much for getting back to me and you have a great 4th, George

Justintime67 · 07-06-2014, 05:05 PM

Got my parts. Thanks again, if won't be long before I'll need more parts. Lol

71GeneralMotorsCorp · 07-06-2014, 07:56 PM

Hey Randy, Thanks again for the parts! I'll post up a picture once I get my hood on. I appreciate it. Thanks! -Coby

teeitup · 07-06-2014, 08:03 PM

George, wish I could of helped out, Hope you had a great 4th!!!

Thank you Justin, always a pleasure

THANK You Coby, it was good to see you again and Thanks for making the trip up here.

rlk · 07-09-2014, 06:36 AM

what is the price on exhaust hangers and the trans linkage and brackets

teeitup · 07-09-2014, 07:30 AM

hangers are $50 and turbo 400 linkage is $30 plus shipping, some of the rubbers on hangers are worn and need repaired or replaced. Thanks

rlk · 07-09-2014, 11:53 AM

I forgot I need an emergency brake cable from the rear wheel to frame new repos don't look good

teeitup · 07-09-2014, 12:45 PM

Sorry no ebrake cables right now

hillbilly_deluxe · 07-09-2014, 10:27 PM

Do you have any step side fenders around randy?

teeitup · 07-10-2014, 07:15 AM

Sorry none right now, Thanks

BLT gmc · 07-10-2014, 11:48 AM

Randy,
High hump BB auto flange cut arrive in good condition. Thank you, Bruce

**19702wdc10** · 07-11-2014, 11:09 AM

Randy,

I am looking for a front sway bar setup that will fit 1970 C10.

Thanks
Joe

teeitup · 07-11-2014, 12:55 PM

Bruce, glad it got there OK, Thanks

Joe, I have a complete setup, it will probably need new rubber bushings $75 shipped

Thanks Randy

**19702wdc10** · 07-14-2014, 04:03 AM

Randy,

SOUNDS GREAT do have a picture of the sway bar and the diameter of it.
Thanks
Joe

teeitup · 07-14-2014, 06:42 AM

Joe, Here is one of them, I have 3, I'll pick out best one. 1 1/8 is the size

**19702wdc10** · 07-15-2014, 12:16 PM

Looks and sounds good to me.
Please send PM with paymet info.
Thank you
Joe

**19702wdc10** · 08-01-2014, 01:15 PM

Recieved sway bar
Thank you

I was wondering if you know if a different front bumper bracket is needed when you switch from manual to poawer steering?

Thank you

teeitup · 08-01-2014, 02:59 PM

Joe, glad it got there safely. On the bumper brackets, I've never really paid attention to that, sorry. Thanks Randy

sbsandgren · 08-01-2014, 06:29 PM

Randy, do you have a high hump trans cover ? Stan

06-25-2014, 04:08 PM	#126
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out a 72 chevy 402 BB 1/2 ton now Bruce, I'll try to get a quote tonight after I get home from my boys ball game. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-03-2014, 11:51 AM	#127
waylonbud Registered User Join Date: Dec 2011 Location: Athens,TN Posts: 302	Re: Parting out a 72 chevy 402 BB 1/2 ton now Randy, I got booster set-up yesterday. Thank you Waylon

07-03-2014, 05:52 PM	#128
Geos 72 Registered User Join Date: Jul 2010 Location: Rochester, NY Posts: 154	Re: Parting out a 72 chevy 402 BB 1/2 ton now Hi Randy, I'm looking for a radiator shroud for my 72 Chevy C10 350.

07-03-2014, 06:01 PM	#129
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out a 72 chevy 402 BB 1/2 ton now Waylon, glad it got there safely, Thanks Geos 72, I may have out in a truck I just bought, I will look in morning. Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-03-2014, 06:14 PM	#130
Geos 72 Registered User Join Date: Jul 2010 Location: Rochester, NY Posts: 154	Re: Parting out a 72 chevy 402 BB 1/2 ton now Thanks Randy, I'll check tomorrow. George

07-04-2014, 04:24 PM	#131
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out a 72 chevy 402 BB 1/2 ton now George, sorry its broke badly on the bottom side __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-04-2014, 08:33 PM	#132
Geos 72 Registered User Join Date: Jul 2010 Location: Rochester, NY Posts: 154	Re: Parting out a 72 chevy 402 BB 1/2 ton now Hi Randy, that was disappointing but I'll keep looking. Thank you very much for getting back to me and you have a great 4th, George

07-06-2014, 05:05 PM	#133
Justintime67 Registered User Join Date: Oct 2012 Location: Victorville, CA Posts: 150	Re: Parting out a 72 chevy 402 BB 1/2 ton now Got my parts. Thanks again, if won't be long before I'll need more parts. Lol __________________ Justin 67 C10 LWB Fleetside "Bessie"

07-06-2014, 07:56 PM	#134
71GeneralMotorsCorp Registered User Join Date: Jul 2011 Location: Kansas Posts: 266	Re: Parting out a 72 chevy 402 BB 1/2 ton now Hey Randy, Thanks again for the parts! I'll post up a picture once I get my hood on. I appreciate it. Thanks! -Coby __________________ "Repetition penetrates even the dullest of minds"

07-06-2014, 08:03 PM	#135
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out a 72 chevy 402 BB 1/2 ton now George, wish I could of helped out, Hope you had a great 4th!!! Thank you Justin, always a pleasure THANK You Coby, it was good to see you again and Thanks for making the trip up here. __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-09-2014, 06:36 AM	#136
rlk Registered User Join Date: Sep 2011 Location: quarryville pa Posts: 57	Re: Parting out a 72 chevy 402 BB 1/2 ton now what is the price on exhaust hangers and the trans linkage and brackets

07-09-2014, 07:30 AM	#137
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out a 72 chevy 402 BB 1/2 ton now hangers are $50 and turbo 400 linkage is $30 plus shipping, some of the rubbers on hangers are worn and need repaired or replaced. Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-09-2014, 11:53 AM	#138
rlk Registered User Join Date: Sep 2011 Location: quarryville pa Posts: 57	Re: Parting out a 72 chevy 402 BB 1/2 ton now I forgot I need an emergency brake cable from the rear wheel to frame new repos don't look good

07-09-2014, 12:45 PM	#139
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out a 72 chevy 402 BB 1/2 ton now Sorry no ebrake cables right now __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-09-2014, 10:27 PM	#140
hillbilly_deluxe Registered User Join Date: Dec 2011 Location: pittstown nj Posts: 103	Re: Parting out a 72 chevy 402 BB 1/2 ton now Do you have any step side fenders around randy?



Register or Log In To remove these advertisements.

07-10-2014, 07:15 AM	#141
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out a 72 chevy 402 BB 1/2 ton now Sorry none right now, Thanks __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-10-2014, 11:48 AM	#142
BLT gmc Registered User Join Date: Feb 2014 Location: West Iowa Posts: 1,107	Re: Parting out a 72 chevy 402 BB 1/2 ton now Randy, High hump BB auto flange cut arrive in good condition. Thank you, Bruce

07-11-2014, 11:09 AM	#143
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: Parting out a 72 chevy 402 BB 1/2 ton now Randy, I am looking for a front sway bar setup that will fit 1970 C10. Thanks Joe

07-11-2014, 12:55 PM	#144
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out a 72 chevy 402 BB 1/2 ton now Bruce, glad it got there OK, Thanks Joe, I have a complete setup, it will probably need new rubber bushings $75 shipped Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-14-2014, 04:03 AM	#145
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: Parting out a 72 chevy 402 BB 1/2 ton now Randy, SOUNDS GREAT do have a picture of the sway bar and the diameter of it. Thanks Joe

07-14-2014, 06:42 AM	#146
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out a 72 chevy 402 BB 1/2 ton now Joe, Here is one of them, I have 3, I'll pick out best one. 1 1/8 is the size Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

07-15-2014, 12:16 PM	#147
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: Parting out a 72 chevy 402 BB 1/2 ton now Looks and sounds good to me. Please send PM with paymet info. Thank you Joe

08-01-2014, 01:15 PM	#148
19702wdc10 Active Member Join Date: Jun 2013 Location: Locust Grove, Virginia Posts: 101	Re: Parting out a 72 chevy 402 BB 1/2 ton now Recieved sway bar Thank you I was wondering if you know if a different front bumper bracket is needed when you switch from manual to poawer steering? Thank you

08-01-2014, 02:59 PM	#149
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting out a 72 chevy 402 BB 1/2 ton now Joe, glad it got there safely. On the bumper brackets, I've never really paid attention to that, sorry. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

08-01-2014, 06:29 PM	#150
sbsandgren Registered User Join Date: Mar 2011 Location: Yuba City CA Posts: 41	Re: Parting out a 72 chevy 402 BB 1/2 ton now Randy, do you have a high hump trans cover ? Stan

Register or Log In To remove these advertisements.