OR 67-72 cross members - Page 6 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

WarMonger · 12-22-2015, 01:31 PM

me again, just wondering if any upper coil spring mounts/perches have made their way in your hands yet?

thanks Greg

DLTruck1973 · 12-22-2015, 01:46 PM

Quote:

Originally Posted by WarMonger

me again, just wondering if any upper coil spring mounts/perches have made their way in your hands yet?

thanks Greg

Try this Greg,

http://67-72chevytrucks.com/vboard/s...d.php?t=691278

You might get lucky here. I am not going to have any for months. I cannot say when the next coil spring truck is going to be slated for parting and then, I have to hope they are good.

Good luck with your search,
Thomas

WarMonger · 12-22-2015, 01:48 PM

Thanks thomas, I really appreciate it.

**aotte1** · 12-23-2015, 02:55 AM

Dana 44 front hub needed, may need two with out wear. These are showing wear at bearing bottom on other need to check again.

They are from '79 Dana 44 K10.

thanks,
Les

wdp1956 · 12-23-2015, 12:03 PM

How much for a V8 manual trans rear crossmember shipped to 30161? Doing a 6 to V8 swap on a 68 C30. Thanks, Derick.

DLTruck1973 · 12-23-2015, 12:37 PM

Quote:

Originally Posted by wdp1956

How much for a V8 manual trans rear crossmember shipped to 30161? Doing a 6 to V8 swap on a 68 C30. Thanks, Derick.

Sorry but I do not have any manual trans cross members for a C30 frame. You can also use a C20 long horn cross member but a regular C20 will not work. There is about an inch difference in width.

Thank you,
Thomas

DLTruck1973 · 12-23-2015, 12:38 PM

Quote:

Originally Posted by aotte1

Dana 44 front hub needed, may need two with out wear. These are showing wear at bearing bottom on other need to check again.

They are from '79 Dana 44 K10.

thanks,
Les

I have these for $80.00 a pair plus shipping.

Let me know,
Thomas

**aotte1** · 12-23-2015, 11:39 PM

Thomas,
Interested, is it ok if I see photo first before saying yes. Or are they same condition as mine without the wear on roller bearing hub surface, then I will take them.

Les

rsmarr1982 · 12-27-2015, 12:12 AM

Do u have a manual transmission crossmember for a straight 6?

DLTruck1973 · 12-28-2015, 12:07 PM

Quote:

Originally Posted by aotte1

Thomas,
Interested, is it ok if I see photo first before saying yes. Or are they same condition as mine without the wear on roller bearing hub surface, then I will take them.

Les

Hi Les,

I got your PM and I will post some photos up soon.

Thank you,
Thomas

DLTruck1973 · 12-28-2015, 12:08 PM

Quote:

Originally Posted by rsmarr1982

Do u have a manual transmission crossmember for a straight 6?

Sorry but I have nothing for a 6 at this time.

Thank you for the interest,
Thomas

DLTruck1973 · 12-28-2015, 01:20 PM

Quote:

Originally Posted by aotte1

Dana 44 front hub needed, may need two with out wear. These are showing wear at bearing bottom on other need to check again.

They are from '79 Dana 44 K10.

thanks,
Les

Here you go Les.

$80.00 for the pair plus $13.00 to ship so $93.00 total.

Let me know.

Thank you,
Thomas

**Seanext** · 01-05-2016, 12:15 AM

Do you have a 72 auto trans cross member? If so shipped to 28034

DLTruck1973 · 01-05-2016, 02:35 PM

Quote:

Originally Posted by Seanext

Do you have a 72 auto trans cross member? If so shipped to 28034

Yes, I have one for $40.00 plus 27.00 shipping. Total will be $67.00

Let me know and I can PM you payment information.

Thank you,
Thomas

**Seanext** · 01-05-2016, 05:00 PM

That would be great just PM payment info.

DLTruck1973 · 01-05-2016, 05:15 PM

Quote:

Originally Posted by Seanext

That would be great just PM payment info.

PM sent

Thank you,
Thomas

musclecarfreak · 01-08-2016, 09:18 PM

Thomas, I am needing rear frame cuts for a 72 lwb 4wd. Just bare frame rails, no hangers or mounts. I would love to have from the bumper all the way to just in front of the large "mid" crossmember, but I realize that shipping may dictate length. I could even possibly use some sections from one you've cut up already if that's an option. What have you got? Thanks! Todd. Ship zip 64029

**aotte1** · 01-08-2016, 11:13 PM

Thomas,
If the bearing surfaces are good I will take them, and PayPal you the funds.
Thanks for posting the photos.

You can pm information.

Also need a rear spring shackle for a '64 K10, casting number 3726902, and have thread/photos under 4x4. Will check, think it is right side.

Les

DLTruck1973 · 01-08-2016, 11:33 PM

Quote:

Originally Posted by aotte1

Thomas,
If the bearing surfaces are good I will take them, and PayPal you the funds.
Thanks for posting the photos.

You can pm information.

Also need a rear spring shackle for a '64 K10, casting number 3726902, and have thread/photos under 4x4. Will check, think it is right side.

Les

Hi Les,

I will be more than happy to take care of your needs on Monday. We are closed for the weekend. The bearing surfaces are in excellent condition and will work very nice for you.

Not sure on the 64 K10 shackle, I will have to check on Monday.

Thank you and have a good weekend,

Thomas

DLTruck1973 · 01-08-2016, 11:40 PM

Quote:

Originally Posted by musclecarfreak

Thomas, I am needing rear frame cuts for a 72 lwb 4wd. Just bare frame rails, no hangers or mounts. I would love to have from the bumper all the way to just in front of the large "mid" crossmember, but I realize that shipping may dictate length. I could even possibly use some sections from one you've cut up already if that's an option. What have you got? Thanks! Todd. Ship zip 64029

Hi Todd,

When you say " large "mid" crossmember" are you talking about the one right near the rear (forward position) spring hanger? That would be a lot to ship.

Currently I only have a short (front to about the engine cross member) piece for the drivers side.

I do have a K10 that is going to get parted but have no idea when. We have about 15 trucks at the shop to part and more elsewhere. Most of the time we cut the frame up for the cross members and spring hangers. It will take extra time to save the rails or even pieces of them to avoid damage at rivet holes.

If you are looking for something soon, I will not be able to help you. I will keep it in mind when we part this truck.

Thank you,
Thomas

musclecarfreak · 01-09-2016, 11:01 AM

I assumed that the frame rails were probably casualties to harvest the bracketry to sell. That is the crossmember I am speaking of. I have not measured how long the frame rail would be to that point. But with no brackets, I assumed the rails could be strapped together or shipped individually. Kind of like shipping a rear suspension arm? I will continue to search locally, and watch your posts to see when you get close to parting a K10. Thanks!

**aotte1** · 01-10-2016, 03:34 AM

Thomas,
Thanks for confirmation on bearing surfaces, will complete Monday.

Les

**aotte1** · 01-13-2016, 10:39 PM

Thomas,

I will take the spindles, per our Saturday confirmation. Just following up,please provide information for payment.

thanks,
Les

**aotte1** · 01-26-2016, 07:57 PM

Thomas,

Received the spindles and they will fix me up!
Exactly as you described.
Thanks,
Les

Frankie P. · 01-26-2016, 08:18 PM

In need of a 71 C10 SWB rear shock crossmember. If available, how much shipped to 90715?
Thank you

12-22-2015, 01:31 PM	#126
WarMonger Registered User Join Date: Jan 2015 Location: Ventura, CA Posts: 818	Re: 67-72 cross members me again, just wondering if any upper coil spring mounts/perches have made their way in your hands yet? thanks Greg __________________ ..................... ____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1970 C20 -_--_--_- ______ _--_--_- /___\|__\____ -_--_-_ \|_(0)\|__\|_(0)] 1972 K5

12-22-2015, 01:48 PM	#128
WarMonger Registered User Join Date: Jan 2015 Location: Ventura, CA Posts: 818	Re: 67-72 cross members Thanks thomas, I really appreciate it. __________________ ..................... ____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1970 C20 -_--_--_- ______ _--_--_- /___\|__\____ -_--_-_ \|_(0)\|__\|_(0)] 1972 K5

12-23-2015, 02:55 AM	#129
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 67-72 cross members Dana 44 front hub needed, may need two with out wear. These are showing wear at bearing bottom on other need to check again. They are from '79 Dana 44 K10. thanks, Les Attached Images

12-23-2015, 12:03 PM	#130
wdp1956 Registered User Join Date: Oct 2011 Location: Rome, GA Posts: 14	Re: 67-72 cross members How much for a V8 manual trans rear crossmember shipped to 30161? Doing a 6 to V8 swap on a 68 C30. Thanks, Derick.

12-23-2015, 11:39 PM	#133
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 67-72 cross members Thomas, Interested, is it ok if I see photo first before saying yes. Or are they same condition as mine without the wear on roller bearing hub surface, then I will take them. Les

12-27-2015, 12:12 AM	#134
rsmarr1982 Registered User Join Date: Jul 2010 Location: mogadore ohio Posts: 867	Re: 67-72 cross members Do u have a manual transmission crossmember for a straight 6? __________________ 1969 chevy c10 lwb stepside 250 6 3 ott 1971 chevy c10 lwb 250 6 with power steering 3 ott 1972 chevy k20 4x4 350/TH350 automatic 1978 chevy Malibu 4dr 305 2bbl (all original) 1979 chevy k10 Scottsdale 350/th350 full-time 4wd(daily driver)

01-05-2016, 12:15 AM	#138
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 587	Re: 67-72 cross members Do you have a 72 auto trans cross member? If so shipped to 28034

01-05-2016, 05:00 PM	#140
Seanext Senior Member Join Date: Mar 2013 Location: Dallas NC Posts: 587	Re: 67-72 cross members That would be great just PM payment info.

01-08-2016, 09:18 PM	#142
musclecarfreak Registered User Join Date: Oct 2005 Location: Grain Valley MO Posts: 29	Re: 67-72 cross members Thomas, I am needing rear frame cuts for a 72 lwb 4wd. Just bare frame rails, no hangers or mounts. I would love to have from the bumper all the way to just in front of the large "mid" crossmember, but I realize that shipping may dictate length. I could even possibly use some sections from one you've cut up already if that's an option. What have you got? Thanks! Todd. Ship zip 64029

01-08-2016, 11:13 PM	#143
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 67-72 cross members Thomas, If the bearing surfaces are good I will take them, and PayPal you the funds. Thanks for posting the photos. You can pm information. Also need a rear spring shackle for a '64 K10, casting number 3726902, and have thread/photos under 4x4. Will check, think it is right side. Les

01-09-2016, 11:01 AM	#146
musclecarfreak Registered User Join Date: Oct 2005 Location: Grain Valley MO Posts: 29	Re: 67-72 cross members I assumed that the frame rails were probably casualties to harvest the bracketry to sell. That is the crossmember I am speaking of. I have not measured how long the frame rail would be to that point. But with no brackets, I assumed the rails could be strapped together or shipped individually. Kind of like shipping a rear suspension arm? I will continue to search locally, and watch your posts to see when you get close to parting a K10. Thanks!

01-10-2016, 03:34 AM	#147
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 67-72 cross members Thomas, Thanks for confirmation on bearing surfaces, will complete Monday. Les

01-13-2016, 10:39 PM	#148
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 67-72 cross members Thomas, I will take the spindles, per our Saturday confirmation. Just following up,please provide information for payment. thanks, Les

01-26-2016, 07:57 PM	#149
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: 67-72 cross members Thomas, Received the spindles and they will fix me up! Exactly as you described. Thanks, Les

01-26-2016, 08:18 PM	#150
Frankie P. Registered User Join Date: Dec 2015 Location: Huntington Beach Ca Posts: 41	Re: 67-72 cross members In need of a 71 C10 SWB rear shock crossmember. If available, how much shipped to 90715? Thank you



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.