** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built. - Page 61 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**oldman3** · 09-27-2011, 09:37 AM

I'm always slow, but the truck looks great....Jim

**67cheby** · 09-27-2011, 09:41 AM

i prefer the term "CREEPER" over Stalker ...just sayin

CowboyProtectionUnit · 09-27-2011, 08:50 PM

Quote:

Originally Posted by 67cheby

i prefer the term "CREEPER" over Stalker ...just sayin

Creeping and Stalking are SUCH STRONG WORDS.... I prefer Extreme Intelligence Gathering

**67cheby** · 09-27-2011, 10:21 PM

Quote:

Originally Posted by CowboyProtectionUnit

Creeping and Stalking are SUCH STRONG WORDS.... I prefer Extreme Intelligence Gathering

oh...that's a good one

drewskiren · 09-27-2011, 10:45 PM

Quote:

Originally Posted by CowboyProtectionUnit

Creeping and Stalking are SUCH STRONG WORDS.... I prefer Extreme Intelligence Gathering

Is that what they call it in the Cowboy Protection field????

**68 Four on the Floor** · 09-27-2011, 09:45 AM

Maybe I missed a post but why is the fender all blue not blue/white?
Posted via Mobile Device

drewskiren · 09-27-2011, 08:01 PM

Quote:

Originally Posted by 68 Four on the Floor

Maybe I missed a post but why is the fender all blue not blue/white?
Posted via Mobile Device

See page 47, post 1170.

**Dieselwrencher** · 09-27-2011, 02:39 PM

It's looking great Drew. I'm just curious if you plan to tint the windows on it or not? I think it would look sweet with some tint!

drewskiren · 09-27-2011, 10:59 PM

Quote:

Originally Posted by Dieselwrencher

It's looking great Drew. I'm just curious if you plan to tint the windows on it or not? I think it would look sweet with some tint!

Yes it will get tint. I used to tint cars on the side in college at my house, but I'm pretty rusty now. Probably just take it somewhere.

drewskiren · 09-27-2011, 11:08 PM

Hung the drivers door and it fits like a glove now too. The fenders are just sitting there to help me line up the doors, don't get excited when I pull them off again. I'll have to drill the frame for the 2 radiator support bolts next and then fenders and inner fenders could be finalized.

I set the seat inside the cab so I could make VROOOMMM - VROOOMMM noises.

**68 Four on the Floor** · 09-27-2011, 10:02 PM

Ah yes musta missed that episode

BenE · 09-27-2011, 10:34 PM

I must of missed something too. Did you leave that notch in drivers side cab corner for a reason? Fuel filler lines maybe? I'm as addicted to this thread as much as everyone else! Keep up the good work and the updates coming!

drewskiren · 09-27-2011, 10:49 PM

Quote:

Originally Posted by BenE

I must of missed something too. Did you leave that notch in drivers side cab corner for a reason? Fuel filler lines maybe? I'm as addicted to this thread as much as everyone else! Keep up the good work and the updates coming!

Yes, Fuel fill hose that runs from the 72 location into the cab, back out of the cab floor and directly rearward to my 2002 gas tank. All part of the stock 72 sleeper look and not highly modified, shaved, chopped, channeled, etc. The goal is for the outward appearance to be bone stock except wheels and a little lowering. Trying to make someone question what they knew 2 minutes before they saw it - Chevrolet never made a crew cab in this year, wait, yeah they did, of course I remember now....., wait no that was 73, uh uh they must have made a few in 72 as a dry run. Yeah, yeah that's it. ---- I can hear them arguing with themselves now.

70LonghornCST · 09-27-2011, 11:20 PM

You've created a MONSTER! Oh wait, this is titled YOUNG FRANKENSTEIN.

1985-GMC · 09-28-2011, 12:07 AM

I love it!

mcbassin · 09-28-2011, 12:19 AM

Very nice progress Drew! Thanks for the daily inspiration.

**67cheby** · 09-28-2011, 09:10 AM

the 4th door lines up very nicely also ...good work !!

**youngrodder** · 09-28-2011, 09:32 AM

Quote:

Originally Posted by 67cheby

the 4th door lines up very nicely also ...good work !!

Yes, but the gap looks a little tight....ha ha

**67cheby** · 09-28-2011, 09:38 AM

VERY CLOSE tolerances in the DREW SHOP !!

gcburdic · 09-28-2011, 09:41 AM

Quote:

Originally Posted by 67cheby

the 4th door lines up very nicely also ...good work !!

Well, well...looky there...you beat VA72C10 to a post after a Drew update

Looking nice Drew!!!

**67cheby** · 09-28-2011, 09:58 AM

hey, hey....i didnt even notice !! just so you guys know, i sell cars for a living and things are pretty slow right now, so for about 8 out of the 10 hrs i am at work every day ......this is what i do !! LOL

wicky · 09-28-2011, 12:12 PM

Quote:

Originally Posted by 67cheby

hey, hey....i didnt even notice !! just so you guys know, i sell cars for a living and things are pretty slow right now, so for about 8 out of the 10 hrs i am at work every day ......this is what i do !! LOL

I always wondered what u did cheby

Posted via Mobile Device

**Dieselwrencher** · 09-28-2011, 03:18 PM

Drew, you should add a door handle on the LH rear cab section and have some one paint on a door opening outline to really freak people out.

It's looking great!

mcbassin · 09-28-2011, 04:08 PM

Drew, You are going to make 200K hits today or tomorrow

You seem to be the most popular builder on here

**67cheby** · 09-28-2011, 04:19 PM

156,432 of them are mine....just sayin

09-27-2011, 09:37 AM	#1
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I'm always slow, but the truck looks great....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

09-27-2011, 09:41 AM	#2
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. i prefer the term "CREEPER" over Stalker ...just sayin __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-27-2011, 09:45 AM	#6
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Maybe I missed a post but why is the fender all blue not blue/white? Posted via Mobile Device

09-27-2011, 02:39 PM	#8
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. It's looking great Drew. I'm just curious if you plan to tint the windows on it or not? I think it would look sweet with some tint! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-27-2011, 11:08 PM	#10
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Hung the drivers door and it fits like a glove now too. The fenders are just sitting there to help me line up the doors, don't get excited when I pull them off again. I'll have to drill the frame for the 2 radiator support bolts next and then fenders and inner fenders could be finalized. I set the seat inside the cab so I could make VROOOMMM - VROOOMMM noises. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife! Last edited by drewskiren; 09-28-2011 at 09:03 AM.

09-27-2011, 10:02 PM	#11
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Ah yes musta missed that episode

09-27-2011, 10:34 PM	#12
BenE Registered User Join Date: Jun 2010 Location: Wallingford,Ky Posts: 22	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I must of missed something too. Did you leave that notch in drivers side cab corner for a reason? Fuel filler lines maybe? I'm as addicted to this thread as much as everyone else! Keep up the good work and the updates coming!

09-27-2011, 11:20 PM	#14
70LonghornCST Moderator Join Date: Jun 2008 Location: Modesto, CA Posts: 5,775	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. You've created a MONSTER! Oh wait, this is titled YOUNG FRANKENSTEIN. __________________ 2018 Chevy Crew Cab 2006 Impala SS 1965 Plymouth Sport Fury 1970 Chevy Longhorn Bucket Seats Shoulder Belts Front Tow Hooks Factory Air Factory Speedwarning, Tach & Vaccum Factory Tilt CST Package AM/FM Radio Bumper Guards Richard 70 Longhorn CST Build Adding an AM/FM Decal

09-28-2011, 12:07 AM	#15
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I love it! __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

09-28-2011, 12:19 AM	#16
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Very nice progress Drew! Thanks for the daily inspiration. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

09-28-2011, 09:10 AM	#17
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. the 4th door lines up very nicely also ...good work !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-28-2011, 09:38 AM	#19
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. VERY CLOSE tolerances in the DREW SHOP !! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-28-2011, 09:58 AM	#21
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. hey, hey....i didnt even notice !! just so you guys know, i sell cars for a living and things are pretty slow right now, so for about 8 out of the 10 hrs i am at work every day ......this is what i do !! LOL __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

09-28-2011, 03:18 PM	#23
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Drew, you should add a door handle on the LH rear cab section and have some one paint on a door opening outline to really freak people out. It's looking great! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-28-2011, 04:08 PM	#24
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Drew, You are going to make 200K hits today or tomorrow You seem to be the most popular builder on here __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group



Register or Log In To remove these advertisements.

09-28-2011, 04:19 PM	#25
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. 156,432 of them are mine....just sayin __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Register or Log In To remove these advertisements.