Tootsie build for my mother with cancer - Page 61 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

Rusbuilt · 11-11-2012, 09:05 PM

man I love this thing, even if you can see the frame under the bumper!

**superflysteiny** · 11-11-2012, 09:15 PM

Thanks man I appreciate that. I think I will run a stock bumper
Posted via Mobile Device

gringoloco · 11-11-2012, 10:10 PM

I would cut the bar at the bulkhead and mount it at an angle. Chroming it will make it look like an afterthought/mistake you tried to fix. Only use the fogs if you're updating the headlights to match. My 2 cents...
Posted via Mobile Device

**lolife99** · 11-11-2012, 10:19 PM

Quote:

Originally Posted by gringoloco

I would cut the bar at the bulkhead and mount it at an angle. Chroming it will make it look like an afterthought/mistake you tried to fix. Only use the fogs if you're updating the headlights to match. My 2 cents...
Posted via Mobile Device

I agree.
I would weld the two front horizontal tubes together,... without the vertical tubes.

I would also run a standard front bumper.
This truck has too much class to run a LMC running light bumper.

big_al_71 · 11-11-2012, 10:34 PM

Eric if it bothers you that much i will trade you even for sylvester ....

I would not chrome it nor paint it I would cut it and reweld as already mentioned if it bothers you that much if it was me i would leave it to give people a reason to try to look under it to see that

frame....

**superflysteiny** · 11-11-2012, 11:19 PM

Quote:

Originally Posted by gringoloco

I would cut the bar at the bulkhead and mount it at an angle. Chroming it will make it look like an afterthought/mistake you tried to fix. Only use the fogs if you're updating the headlights to match. My 2 cents...
Posted via Mobile Device

Going to gut the bar out talked to Nate he is going to make me another one and I will weld it in place. Great customer service

Quote:

Originally Posted by lolife99

I agree.
I would weld the two front horizontal tubes together,... without the vertical tubes.we will angle it up

I would also run a standard front bumper.
This truck has too much class to run a LMC running light bumper.

stock bumper it is. Thank you

Quote:

Originally Posted by big_al_71

Eric if it bothers you that much i will trade you even for sylvester ....

I would not chrome it nor paint it I would cut it and reweld as already mentioned if it bothers you that much if it was me i would leave it to give people a reason to try to look under it to see that

frame....

Point taken Al thank you. By the way I love Sylvester
Posted via Mobile Device

David67 · 11-11-2012, 11:25 PM

Quote:

Originally Posted by lolife99

I would also run a standard front bumper.
This truck has too much class to run a LMC running light bumper.

I completely agree. And that's awesome of Nate to do that.

Lolyin58 · 11-12-2012, 12:03 AM

Eric it's looking amazing. Nate is the man and has the cure for anything. Looking good as always. Good choice to go with the stock bumper!!

Dinos63 · 11-12-2012, 12:11 AM

very nice!! set the bar way up on this one

sduckworth13 · 11-12-2012, 12:47 AM

It doesnt look like it sticks out too far, maybe you could modify the front bumper to fit the frame behind it and rechrome it. Sweet truck.

Graham57a · 11-12-2012, 11:15 AM

I vote stock bumper. And I'm glad to hear Nate is gonna help you figure this thing out. What are you gonna run for headlights on this girl?
Posted via Mobile Device

**superflysteiny** · 11-12-2012, 12:15 PM

Quote:

Originally Posted by David67

I completely agree. And that's awesome of Nate to do that.

Yes he is

Quote:

Originally Posted by Lolyin58

Eric it's looking amazing. Nate is the man and has the cure for anything. Looking good as always. Good choice to go with the stock bumper!!

Stock it is

Quote:

Originally Posted by Dinos63

very nice!! set the bar way up on this one

Thanks man

Quote:

Originally Posted by sduckworth13

It doesnt look like it sticks out too far, maybe you could modify the front bumper to fit the frame behind it and rechrome it. Sweet truck.

Just need to remove the bar and move it up

Quote:

Originally Posted by Graham57a

I vote stock bumper. And I'm glad to hear Nate is gonna help you figure this thing out. What are you gonna run for headlights on this girl?
Posted via Mobile Device

I think I am going to run the stock head lights

**superflysteiny** · 11-12-2012, 03:34 PM

Here are some pics of the hoot hinges installed

69CST-V · 11-12-2012, 03:36 PM

Eric,

More progress. Looks great. Glad you decided on the stock bumper.

**67cheby** · 11-12-2012, 03:38 PM

best looking "hoot" hinges i have seen in a while !! LOL

**superflysteiny** · 11-12-2012, 03:40 PM

Quote:

Originally Posted by 69CST-V

Eric,

More progress. Looks great. Glad you decided on the stock bumper.

Ya like I said I had this one laying around so I thought I would try to see what it would look like on.

Quote:

Originally Posted by 67cheby

best looking "hoot" hinges i have seen in a while !! LOL

I agree

Rusbuilt · 11-12-2012, 03:45 PM

Nice!
Posted via Mobile Device

big_al_71 · 11-12-2012, 04:21 PM

Those hinges are great as I seen Raul's in person...

**superflysteiny** · 11-12-2012, 05:09 PM

They are easy to put on too
Posted via Mobile Device

duallyjams · 11-13-2012, 10:10 AM

More pics the better for those of us that live on the other coast with a slim chance of seeing it in person.This build is just amazing.

**superflysteiny** · 11-13-2012, 01:03 PM

More pics coming your may soon my friend

truckzilla · 11-13-2012, 01:08 PM

Good heavens it's beautiful! I, for one, am glad to see that you're getting your money's worth out of your dimple dies!

Man, how I want some!

I think the only think that is going to be more impressive on how it looks, is how it is going to simply fly with that new blower!

Keep up the awesome work man!

**CC69Rat** · 11-13-2012, 02:52 PM

Eric- PM sent about Billet Specialties wheels.
Posted via Mobile Device

**superflysteiny** · 11-13-2012, 06:58 PM

Thanks guys glad you guys like the truck. Chad let me talk to the old man tonight

66redw/white · 11-13-2012, 09:59 PM

glad you put that middle pic up. only thing i saw in he other two was that big ol tvs! engine looks GOOD!

11-11-2012, 09:05 PM	#1501
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Tootsie build for my mother with cancer man I love this thing, even if you can see the frame under the bumper! __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

11-11-2012, 09:15 PM	#1502
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Thanks man I appreciate that. I think I will run a stock bumper Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

11-11-2012, 10:10 PM	#1503
gringoloco A guy with a truck Join Date: Sep 2005 Location: Germany, for now Posts: 5,920	Re: Tootsie build for my mother with cancer I would cut the bar at the bulkhead and mount it at an angle. Chroming it will make it look like an afterthought/mistake you tried to fix. Only use the fogs if you're updating the headlights to match. My 2 cents... Posted via Mobile Device __________________ -Chris Instagram _elgringoloco_ '70 Short-Wide How to: Ruin a perfectly good C10 ‘70 Blazer ConversionHow To: Ruin a Perfectly Good 4wd '72 Highlander How To: Ruin a Perfectly Good K/5 (SOLD) '72 Blazer 2WD How to: Ruin a perfectly good Blazer (SOLD) '05 Yukon Daily Driven (not so stock) Yukon (SOLD) ‘07 Yukon Denali (daily) Members met list: SCOTI, darkhorse970, 67cheby, 67cheby'sGirl, klmore, porterbuilt, n2billet, Fastrucken, classicchev, Col Clank, GSFMECH, HuggerCST, Spray-Bomb, BACKYARD88, 5150, fine69, fatbass, smbrouss70, 65StreetCruiser, GAc10boy

11-11-2012, 10:34 PM	#1505
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Tootsie build for my mother with cancer Eric if it bothers you that much i will trade you even for sylvester .... I would not chrome it nor paint it I would cut it and reweld as already mentioned if it bothers you that much if it was me i would leave it to give people a reason to try to look under it to see that frame.... Attached Images __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-12-2012, 12:03 AM	#1508
Lolyin58 Registered User Join Date: Mar 2008 Location: Calgary,Alberta,Canada Posts: 372	Re: Tootsie build for my mother with cancer Eric it's looking amazing. Nate is the man and has the cure for anything. Looking good as always. Good choice to go with the stock bumper!! __________________ Dino's 3rd annual Pre-ShowGit Down http://67-72chevytrucks.com/vboard/s...12#post5639812

11-12-2012, 12:11 AM	#1509
Dinos63 chevy only Join Date: Sep 2006 Location: Phoenix, AZ Posts: 6,619	Re: Tootsie build for my mother with cancer very nice!! set the bar way up on this one __________________ CHEVY ONLY... Nothin Else !

11-12-2012, 12:47 AM	#1510
sduckworth13 Registered User Join Date: Mar 2011 Location: Kansas City, Missouri Posts: 3,541	Re: Tootsie build for my mother with cancer It doesnt look like it sticks out too far, maybe you could modify the front bumper to fit the frame behind it and rechrome it. Sweet truck. __________________ Scott

11-12-2012, 11:15 AM	#1511
Graham57a Registered User Join Date: Aug 2010 Location: Asheville, North Carolina Posts: 1,838	Re: Tootsie build for my mother with cancer I vote stock bumper. And I'm glad to hear Nate is gonna help you figure this thing out. What are you gonna run for headlights on this girl? Posted via Mobile Device __________________ ANDREW 1972 Chevy SWB Cheyenne Super JANE http://67-72chevytrucks.com/vboard/s...d.php?t=462072 1972 GMC Jimmy PENNY http://67-72chevytrucks.com/vboard/s...d.php?t=735827 1968 GMC patina swb PEARL http://67-72chevytrucks.com/vboard/s...d.php?t=731315 1972 Chevy K20 BRUCE http://67-72chevytrucks.com/vboard/s...d.php?t=805788 1972 Chevy SWB Highlander OLIVE Build thread coming

11-12-2012, 03:34 PM	#1513
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Here are some pics of the hoot hinges installed __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

11-12-2012, 03:36 PM	#1514
69CST-V Registered User Join Date: Mar 2010 Location: Piper, KS Posts: 683	Re: Tootsie build for my mother with cancer Eric, More progress. Looks great. Glad you decided on the stock bumper. __________________ Bryce '69 SWB Fleet Still Under Construction Company Trucks

11-12-2012, 03:38 PM	#1515
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Tootsie build for my mother with cancer best looking "hoot" hinges i have seen in a while !! LOL __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

11-12-2012, 03:45 PM	#1517
Rusbuilt Registered User Join Date: Mar 2012 Location: Knoxville, TN Posts: 5,381	Re: Tootsie build for my mother with cancer Nice! Posted via Mobile Device __________________ -Rus PLEASE HELP WITH PROJECT UNDERHAULINPaypal donations accepted @ rus1785@yahoo.com Rusbuilt's garage 1968 Chevy C-30 Darcy SOLD Rusbuilt shop truck *SOLD*

11-12-2012, 04:21 PM	#1518
big_al_71 Registered User Join Date: Jun 2008 Location: South Florida Posts: 11,375	Re: Tootsie build for my mother with cancer Those hinges are great as I seen Raul's in person... __________________ Get your facts first, and then you can distort them as much as you please!!!!!. Sylvester's build thread >>>http://67-72chevytrucks.com/vboard/s...ht=big+rebuild

11-12-2012, 05:09 PM	#1519
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer They are easy to put on too Posted via Mobile Device __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

11-13-2012, 10:10 AM	#1520
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: Tootsie build for my mother with cancer More pics the better for those of us that live on the other coast with a slim chance of seeing it in person.This build is just amazing. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!



Register or Log In To remove these advertisements.

11-13-2012, 01:03 PM	#1521
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer More pics coming your may soon my friend __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

11-13-2012, 01:08 PM	#1522
truckzilla Registered User Join Date: May 2011 Location: Fort Worth, Texas Posts: 468	Re: Tootsie build for my mother with cancer Good heavens it's beautiful! I, for one, am glad to see that you're getting your money's worth out of your dimple dies! Man, how I want some! I think the only think that is going to be more impressive on how it looks, is how it is going to simply fly with that new blower! Keep up the awesome work man!

11-13-2012, 02:52 PM	#1523
CC69Rat Senior Member Join Date: Jan 2011 Location: Chattanooga TN Posts: 6,205	Re: Tootsie build for my mother with cancer Eric- PM sent about Billet Specialties wheels. Posted via Mobile Device __________________ Chad 1967 C10 SWB - Project Savannah - 6.0/4L80 Currently underway 1968 C10 SWB - TOTY 2018, 50th Anniversary Tribute Project * Sold * Pride and Joy 1986 Silverado Short Fleet - Scarlet Sold 1985 Silverado Short Fleet Sold 2022 Jeep Gladiator Mojave 2001 Jeep Cherokee XJ 4x4 - Lifted, Built 1992 Jeep Cherokee XJ 4x4 - Lifted 2013 Honda Accord EX-L v6 Coupe 6spd (wife's ride)

11-13-2012, 06:58 PM	#1524
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Tootsie build for my mother with cancer Thanks guys glad you guys like the truck. Chad let me talk to the old man tonight __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

11-13-2012, 09:59 PM	#1525
66redw/white made in america Join Date: May 2010 Location: baton rouge la Posts: 653	Re: Tootsie build for my mother with cancer glad you put that middle pic up. only thing i saw in he other two was that big ol tvs! engine looks GOOD! __________________ 2005 gmc sierra- 4/6, t56, cammed 5.3. 4.10, big bars, and brakes. sounds good 1964 c10-283 powerpack, 3 on the tree 2004 corvette- lowered, borla, tuned. slow my old girl 1966 c10- 305v8, t-5 sold

Register or Log In To remove these advertisements.