1976 Square "Simple Green" - Page 66 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

RodsGreen10 · 06-02-2016, 10:24 AM

Quote:

Originally Posted by N2TRUX

You will be truly impressed with the difference the sound dampener makes in your doors. Just be sure to clean the inner door skins and take your time with small strips.

10-4. Thanks

BShort · 06-02-2016, 10:33 AM

I recently took my bed off to do the flip and notch. I used a 4x4 and two 2x4s with a hoist and it went very smoothly. THe only place I scratched was the face of the bed floor behind the tailgate because it touched the hoist when lifted, but you could easily use a towel to keep this from happening.

BShort · 06-02-2016, 10:35 AM

pics of my bed removal

RodsGreen10 · 06-02-2016, 10:42 AM

Quote:

Originally Posted by BShort

pics of my bed removal

Perfect. I just need a cherry picker now.

BShort · 06-02-2016, 10:42 AM

And then I just sat it on 4 jackstands while I did the flip and notch.

BShort · 06-02-2016, 10:45 AM

Quote:

Originally Posted by RodsGreen10

Perfect. I just need a cherry picker now.

Northern Tool, mine was about $260 with the leveler included. It's a 2 ton hoist and had really good reviews. Worked flawlessly. I was going to get the one at HF but the reviews were not so good, and it did not come with the leveler.

Your truck is killer, truly inspirational. Good luck!

RodsGreen10 · 06-02-2016, 10:48 AM

Quote:

Originally Posted by BShort

Northern Tool, mine was about $260 with the leveler included. It's a 2 ton hoist and had really good reviews. Worked flawlessly. I was going to get the one at HF but the reviews were not so good, and it did not come with the leveler.

Your truck is killer, truly inspirational. Good luck!

Thanks for the info appreciate it.

And thank you for the compliment about my truck truly appreciate it.

BShort · 06-02-2016, 10:49 AM

Oh, and I will save you a little more time. The 4x4 is exactly 6 feet long, and the side 2x4s are 4 feet long. I used a long eye bolt and drilled a hole exactly in the center of the 4x4 with a big washer and nut on the bottom. No damage to the bed, and it cost me about $20 in materials.

RodsGreen10 · 06-02-2016, 10:54 AM

Quote:

Originally Posted by BShort

Oh, and I will save you a little more time. The 4x4 is exactly 6 feet long, and the side 2x4s are 4 feet long. I used a long eye bolt and drilled a hole exactly in the center of the 4x4 with a big washer and nut on the bottom. No damage to the bed, and it cost me about $20 in materials.

Awesome man good looking out! Thanks!

**N2TRUX** · 06-02-2016, 11:47 AM

Quote:

Originally Posted by RodsGreen10

Perfect. I just need a cherry picker now.

The cherry picker is a great way to do it. Unfortunately I didnt have one or the room to store one. My compromise was the chain hoist and lowered it down on furniture dollies. By useing Harbor Freight discount codes I was in for about 70.00 and its all much easier to store for me.

BShort · 06-02-2016, 11:54 AM

Quote:

Originally Posted by N2TRUX

The cherry picker is a great way to do it. Unfortunately I didnt have one or the room to store one. My compromise was the chain hoist and lowered it down on furniture dollies. By useing Harbor Freight discount codes I was in for about 70.00 and its all much easier to store for me.

Definitely, it all depends on what your situation is. I will need it for my '59 build so it made sense for me to get one. I have some wall space already lined up to store the hoist, so space was not a concern. In fact, I need it to MAKE space. I use it to lift heavy junk left over from both trucks and haul it to the scrap yard.

RodsGreen10 · 06-02-2016, 11:56 AM

Quote:

Originally Posted by N2TRUX

The cherry picker is a great way to do it. Unfortunately I didnt have one or the room to store one. My compromise was the chain hoist and lowered it down on furniture dollies. By useing Harbor Freight discount codes I was in for about 70.00 and its all much easier to store for me.

Decisions man I don't have a hoist and if I did it probably would pull down my garage and house lmao. And I don't have room for a cherry picker. And I don't trust my neighbors. One of them almost dropped the truck on me one day he was running the jack for me idiot! I will get it figured out. I am at the Point now I need the rear dropped.

**GAc10boy** · 06-02-2016, 12:51 PM

Find somebody on the board who's close to you who wouldn't mind lending a hand. I know there are regional pages within this forum so you could find someone who could help you work on that beautiful truck. you know if i had a cherry picker, id just come up and help.

second thought, maybe i need a cherry picker.

UKNOWME · 06-02-2016, 01:22 PM

Quote:

Originally Posted by RodsGreen10

Well as UKNOWME sarcastically posted

Sarcastically? Who....me?

Quote:

Originally Posted by RodsGreen10

Decisions man I don't have a hoist and if I did it probably would pull down my garage and house lmao. And I don't have room for a cherry picker. And I don't trust my neighbors. One of them almost dropped the truck on me one day he was running the jack for me idiot! I will get it figured out. I am at the Point now I need the rear dropped.

Drive it out here and we can use my shop!

RodsGreen10 · 06-02-2016, 01:27 PM

Quote:

Originally Posted by GAc10boy

Find somebody on the board who's close to you who wouldn't mind lending a hand. I know there are regional pages within this forum so you could find someone who could help you work on that beautiful truck. you know if i had a cherry picker, id just come up and help.

second thought, maybe i need a cherry picker.

I know you would man I appreciate it.

RodsGreen10 · 06-02-2016, 01:28 PM

Quote:

Originally Posted by UKNOWME

Sarcastically? Who....me?

Drive it out here and we can use my shop!

Lol I need w vacation anyways.

RodsGreen10 · 06-02-2016, 08:38 PM

Ok ups decided to show up at 6 today. So I got it in and snapped some quick pics. These are not the best when I can pull it out in the light I will get better.

RodsGreen10 · 06-02-2016, 08:39 PM

Another

RodsGreen10 · 06-02-2016, 08:39 PM

Another 1.

RodsGreen10 · 06-02-2016, 08:40 PM

And another.

RodsGreen10 · 06-03-2016, 04:16 AM

Quote:

Originally Posted by Chaplain

If you're not in a rush I'll see ya soon.

You bringing me a gift? Lol.

RodsGreen10 · 06-03-2016, 04:50 AM

So it is going to take me a couple days to get use to the new interior. Do I like it yes I do. But I have had the green interior for so long it was the norm for me. Do I regret changing it nope. It looks killer. But it will take me a couple days for it to sink in lol. I just need more black so it all matches now. 1 thing I didn't like about the dash pad a small thing is the 4 screws that run along the passenger side the ones below the vents is the holes are not already in the pad and it was no fun trying to get the screws in the clips under the dash. Besides that pad was dead on.

RodsGreen10 · 06-03-2016, 06:42 AM

Got the steering wheel on this morning before work. I will get a pic today when I get home.

BShort · 06-03-2016, 08:48 AM

Looks killer, I want to revamp my interior too. I would really like to put the bezel in my truck with the chrome guage rings. Where did you get yours?

RodsGreen10 · 06-03-2016, 08:54 AM

Quote:

Originally Posted by BShort

Looks killer, I want to revamp my interior too. I would really like to put the bezel in my truck with the chrome guage rings. Where did you get yours?

Thank you. I do like it. Can't wait to get it out of the garage and see it during the day.
I got that bezel with chrome from LMC.

06-02-2016, 10:33 AM	#1627
BShort Registered User Join Date: Oct 2011 Location: Roanoke, VA Posts: 104	Re: 1976 Square "Simple Green" I recently took my bed off to do the flip and notch. I used a 4x4 and two 2x4s with a hoist and it went very smoothly. THe only place I scratched was the face of the bed floor behind the tailgate because it touched the hoist when lifted, but you could easily use a towel to keep this from happening.

06-02-2016, 10:35 AM	#1628
BShort Registered User Join Date: Oct 2011 Location: Roanoke, VA Posts: 104	Re: 1976 Square "Simple Green" pics of my bed removal Attached Images

06-02-2016, 10:42 AM	#1630
BShort Registered User Join Date: Oct 2011 Location: Roanoke, VA Posts: 104	Re: 1976 Square "Simple Green" And then I just sat it on 4 jackstands while I did the flip and notch. Attached Images

06-02-2016, 10:49 AM	#1633
BShort Registered User Join Date: Oct 2011 Location: Roanoke, VA Posts: 104	Re: 1976 Square "Simple Green" Oh, and I will save you a little more time. The 4x4 is exactly 6 feet long, and the side 2x4s are 4 feet long. I used a long eye bolt and drilled a hole exactly in the center of the 4x4 with a big washer and nut on the bottom. No damage to the bed, and it cost me about $20 in materials.

06-02-2016, 12:51 PM	#1638
GAc10boy Senior Member Join Date: Oct 2013 Location: Marietta, GA Posts: 1,642	Re: 1976 Square "Simple Green" Find somebody on the board who's close to you who wouldn't mind lending a hand. I know there are regional pages within this forum so you could find someone who could help you work on that beautiful truck. you know if i had a cherry picker, id just come up and help. second thought, maybe i need a cherry picker. __________________ - Robbie UNITED BY TRUCKS - classic truck video content YouTube: www.youtube.com/c/unitedbytrucks Instagram: @united_by_trucks Paw Paw '68 508 Dark Blue Custom C10 Teddy '68 GMC SWB 503 Light Green LS Build Mississippi Mud '75 Skyline Blue Patina SBC Build

06-02-2016, 08:38 PM	#1642
RodsGreen10 Registered User Join Date: Jun 2015 Location: Richmond,KY and Knoxville,TN Posts: 1,584	Re: 1976 Square "Simple Green" Ok ups decided to show up at 6 today. So I got it in and snapped some quick pics. These are not the best when I can pull it out in the light I will get better. Attached Images

06-02-2016, 08:39 PM	#1643
RodsGreen10 Registered User Join Date: Jun 2015 Location: Richmond,KY and Knoxville,TN Posts: 1,584	Re: 1976 Square "Simple Green" Another Attached Images

06-02-2016, 08:39 PM	#1644
RodsGreen10 Registered User Join Date: Jun 2015 Location: Richmond,KY and Knoxville,TN Posts: 1,584	Re: 1976 Square "Simple Green" Another 1. Attached Images

06-02-2016, 08:40 PM	#1645
RodsGreen10 Registered User Join Date: Jun 2015 Location: Richmond,KY and Knoxville,TN Posts: 1,584	Re: 1976 Square "Simple Green" And another. Attached Images

06-03-2016, 04:50 AM	#1647
RodsGreen10 Registered User Join Date: Jun 2015 Location: Richmond,KY and Knoxville,TN Posts: 1,584	Re: 1976 Square "Simple Green" So it is going to take me a couple days to get use to the new interior. Do I like it yes I do. But I have had the green interior for so long it was the norm for me. Do I regret changing it nope. It looks killer. But it will take me a couple days for it to sink in lol. I just need more black so it all matches now. 1 thing I didn't like about the dash pad a small thing is the 4 screws that run along the passenger side the ones below the vents is the holes are not already in the pad and it was no fun trying to get the screws in the clips under the dash. Besides that pad was dead on. Last edited by RodsGreen10; 06-03-2016 at 05:09 AM.

06-03-2016, 06:42 AM	#1648
RodsGreen10 Registered User Join Date: Jun 2015 Location: Richmond,KY and Knoxville,TN Posts: 1,584	Re: 1976 Square "Simple Green" Got the steering wheel on this morning before work. I will get a pic today when I get home.

06-03-2016, 08:48 AM	#1649
BShort Registered User Join Date: Oct 2011 Location: Roanoke, VA Posts: 104	Re: 1976 Square "Simple Green" Looks killer, I want to revamp my interior too. I would really like to put the bezel in my truck with the chrome guage rings. Where did you get yours?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.