KS Parting a 70 custom 10 - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Cash3481** · 10-09-2014, 11:19 PM

Quote:

Originally Posted by 88JRFAN

Do you have any of the door lock rod's that you would be willing to sell? Need them for both door's. Thanks!

Darren,
I do have several sets of them.
I'll get you a picture tomorrow after work.

**88JRFAN** · 10-10-2014, 07:34 PM

Quote:

Originally Posted by Cash3481

Darren,
I do have several sets of them.
I'll get you a picture tomorrow after work.

Sounds good!

**Cash3481** · 10-11-2014, 11:29 PM

Quote:

Originally Posted by 88JRFAN

Do you have any of the door lock rod's that you would be willing to sell? Need them for both door's. Thanks!

Sorry to all for the delay,
Below is a picture of some of the lock rods. There is more sets out there I just needful find a good set for you.

Quote:

Originally Posted by sstaten69

Hello my son is looking for a drivers side bedside, well we only need from the tail light to maybe the side marker. his is rusted around the tail light and the corner so just need that part to fix his up. if you have a bed that you could cut this off of. thanks for the time Steve.

I have a couple beds but I'm not going to cut them. I thought there was a partial side out there but didn't see the one I thought was out there.

**88JRFAN** · 10-12-2014, 08:31 AM

Looks good to me. I'll take a set for each door. Mainly only need rod's if you're willing to seperate. If not, that will be fine. Let me price and how to pay. Zip is 67401, Thanks, Daren

**Cash3481** · 10-12-2014, 08:33 PM

Quote:

Originally Posted by 88JRFAN

Looks good to me. I'll take a set for each door. Mainly only need rod's if you're willing to seperate. If not, that will be fine. Let me price and how to pay. Zip is 67401, Thanks, Daren

Here they are removed. I put them in a PVC tube so they will not get bent. $15 shipped with clips.

**88JRFAN** · 10-12-2014, 09:17 PM

Quote:

Originally Posted by Cash3481

Here they are removed. I put them in a PVC tube so they will not get bent. $15 shipped with clips.

That works for me. Pm me payment info. I'll pm you my addy. Thanks!!!

68panelman · 10-19-2014, 11:44 AM

Hi Mike, Did you send this out yet? Thanks.

engairuph · 10-19-2014, 02:53 PM

Wanting the a/c box under dash and hood. Price and your location my zip is 39540

engairuph · 10-19-2014, 02:58 PM

Wanting the a/c box under dash and hood. Price and your location my zip is 39540

**Cash3481** · 10-19-2014, 10:01 PM

Quote:

Originally Posted by 68panelman

Hi Mike, Did you send this out yet? Thanks.

I did not, mailed a bunch of stuff and forgot it on the bench. Just got back from a funeral in Indiana. I'll get it ready, sent and let you know the shipping tracking number.

Quote:

Originally Posted by engairuph

Wanting the a/c box under dash and hood. Price and your location my zip is 39540

Do you need everything or just the AC related items? Let me know. Sorry for the slow response... I was out of town.

engairuph · 10-20-2014, 06:36 AM

Quote:

Originally Posted by Cash3481

I did not, mailed a bunch of stuff and forgot it on the bench. Just got back from a funeral in Indiana. I'll get it ready, sent and let you know the shipping.

Do you need everything or just the AC related items? Let me know. Sorry for the slow response... I was out of town.

I have nothing so everything but I know some parts will have to be new.thanks Ralph

**RodnRudy** · 10-21-2014, 07:19 PM

I'd like to buy the engine mount stands if you'd sell them separately. Price? Shipped to New Palestine In 46163

mo · 10-21-2014, 07:57 PM

Mike so you know off hand if the transmission x member is the same for a 68?
I need a transmission x member for a 68 long bed auto.
If so I'll take the x member please shipped to 93013
Thanks

**Cash3481** · 10-21-2014, 09:04 PM

Quote:

Originally Posted by RodnRudy

I'd like to buy the engine mount stands if you'd sell them separately. Price? Shipped to New Palestine In 46163

I have a set out there but I had dental surgery today so it will be tomorrow before I can go out there.

Quote:

Originally Posted by mo

Mike so you know off hand if the transmission x member is the same for a 68?
I need a transmission x member for a 68 long bed auto.
If so I'll take the x member please shipped to 93013
Thanks

They are the same... I have several out there. $45 plus shipping but like I said above... I'll have to get the quote tomorrow. I need to recouperate tonight.

Quote:

Originally Posted by engairuph

I have nothing so everything but I know some parts will have to be new.thanks Ralph

Here is a picture of a set off a truck a guy traded to me yesterday. More pics to follow.

**Cash3481** · 10-21-2014, 09:08 PM

Here is another pic. Its best I can do from the couch! Lol

**Cash3481** · 10-21-2014, 09:23 PM

Quote:

Originally Posted by RodnRudy

I'd like to buy the engine mount stands if you'd sell them separately. Price? Shipped to New Palestine In 46163

Rod,
I'll ship them for $40 to your door.
Let me know and I'll pm you my paypal.

best view · 10-21-2014, 09:50 PM

how about gas cap and do you have a 72 original step bumper for fleet side kenny

**Cash3481** · 10-21-2014, 10:10 PM

Quote:

Originally Posted by best view

how about gas cap and do you have a 72 original step bumper for fleet side kenny

I have a few caps. Sorry I scrapped the last few bumpers. I'll look tomorrow.

engairuph · 10-21-2014, 11:37 PM

How much and zip is 39540? You can email which I can get back to you quicker msairinteriors@yahoo.com

mo · 10-22-2014, 01:43 AM

Sounds good let me know

engairuph · 10-22-2014, 06:46 AM

The a/c box looks good, dollar and shipped to 39540 for total????? email msairinteriors and money order or paypal?????
Thanks
Ralph

best view · 10-22-2014, 07:08 AM

the original cap on that truck

**RodnRudy** · 10-22-2014, 08:00 AM

E mail you sent me was intended for Mo. Please reply to me again about the engine mount stands. Thanks

Dads1967 · 10-22-2014, 09:02 AM

How much for the seat tracks?

Dads1967 · 10-22-2014, 09:03 AM

I need a good driver side window regulator as well.

10-12-2014, 08:31 AM	#154
88JRFAN LET'S GO RACIN' Join Date: Oct 2007 Location: SALINA,KS Posts: 1,212	Re: Parting a 70 custom 10 Looks good to me. I'll take a set for each door. Mainly only need rod's if you're willing to seperate. If not, that will be fine. Let me price and how to pay. Zip is 67401, Thanks, Daren __________________ Daren 04 Chevy Extend cab 2500HD 6.0 Liter 4x4 71 CHEVY 3/4 4X4 402 BB, th400/np205, dana44/eaton ho52 w/4:10-TOY Rip El Jay RIP BOBBO'S MOM

10-19-2014, 11:44 AM	#157
68panelman Registered User Join Date: Jan 2011 Location: Delaware and Long Island, New York Posts: 3,455	Re: Parting a 70 custom 10 Hi Mike, Did you send this out yet? Thanks.

10-19-2014, 02:53 PM	#158
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Parting a 70 custom 10 Wanting the a/c box under dash and hood. Price and your location my zip is 39540

10-19-2014, 02:58 PM	#159
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Parting a 70 custom 10 Wanting the a/c box under dash and hood. Price and your location my zip is 39540

10-21-2014, 07:19 PM	#162
RodnRudy Senior Member Join Date: Oct 2014 Location: New Palestine In Posts: 930	Re: Parting a 70 custom 10 I'd like to buy the engine mount stands if you'd sell them separately. Price? Shipped to New Palestine In 46163

10-21-2014, 07:57 PM	#163
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: Parting a 70 custom 10 Mike so you know off hand if the transmission x member is the same for a 68? I need a transmission x member for a 68 long bed auto. If so I'll take the x member please shipped to 93013 Thanks __________________ 72 Cheyenne super swb 4x4 68 CST swb anniversary gold 67 custom swb 4x4

10-21-2014, 09:08 PM	#165
Cash3481 Loves all GMC trucks Join Date: Jul 2010 Location: Columbia Mo Posts: 4,435	Re: Parting a 70 custom 10 Here is another pic. Its best I can do from the couch! Lol Attached Images __________________ Mike If your helping someone and expecting something in return... your doing business not kindness!

10-21-2014, 09:50 PM	#167
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,016	Re: Parting a 70 custom 10 how about gas cap and do you have a 72 original step bumper for fleet side kenny

10-21-2014, 11:37 PM	#169
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Parting a 70 custom 10 How much and zip is 39540? You can email which I can get back to you quicker msairinteriors@yahoo.com

10-22-2014, 01:43 AM	#170
mo Registered User Join Date: Apr 2001 Location: santa barbara, ca Posts: 829	Re: Parting a 70 custom 10 Sounds good let me know __________________ 72 Cheyenne super swb 4x4 68 CST swb anniversary gold 67 custom swb 4x4

10-22-2014, 06:46 AM	#171
engairuph Registered User Join Date: Oct 2014 Location: D'Iberville, MS Posts: 449	Re: Parting a 70 custom 10 The a/c box looks good, dollar and shipped to 39540 for total????? email msairinteriors and money order or paypal????? Thanks Ralph

10-22-2014, 07:08 AM	#172
best view Registered User Join Date: Apr 2009 Location: newbury new hampsire Posts: 2,016	Re: Parting a 70 custom 10 the original cap on that truck

10-22-2014, 08:00 AM	#173
RodnRudy Senior Member Join Date: Oct 2014 Location: New Palestine In Posts: 930	Re: Parting a 70 custom 10 E mail you sent me was intended for Mo. Please reply to me again about the engine mount stands. Thanks

10-22-2014, 09:02 AM	#174
Dads1967 Registered User Join Date: Apr 2014 Location: Walkerton, IN Posts: 290	Re: Parting a 70 custom 10 How much for the seat tracks?

10-22-2014, 09:03 AM	#175
Dads1967 Registered User Join Date: Apr 2014 Location: Walkerton, IN Posts: 290	Re: Parting a 70 custom 10 I need a good driver side window regulator as well.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.