|
|
|
10-20-2011, 06:09 PM
|
#1 |
|
Registered User
Join Date: Apr 2011
Location: San Diego CA
Posts: 241
|
Re: What Did You Do With Your Truck Today ?
While I didn't do it today, last week I put on new chrome trim rings on my wheels and added new chrome outside review mirrors..
I know I know, pics to follow |
|
|
10-20-2011, 06:24 PM
|
#2 |
|
Registered User
Join Date: Apr 2011
Location: Caldwell, Idaho,United States
Posts: 143
|
Re: What Did You Do With Your Truck Today ?
Finished the pass. side airbag cut out and remounted the spindles/wheels, I set her on the ground aired out and the crossmember just sits on the ground, so I am going to need a 2" taller bag cup. this is fun! Also centered the engine/trans and tacked the frame mounts to the crossmember.
__________________
Learn to deal with reality, or reality will deal with you. |
|
|
|
10-20-2011, 08:09 PM
|
#3 |
|
Registered User
Join Date: Feb 2009
Location: Surrey B.C. Canada
Posts: 255
|
Re: What Did You Do With Your Truck Today ?
Picked up an S10 drive shaft, had it shortened and installed it this afternoon. Took it out for a couple of test drives around the block and shifts nice plus it is a lot quieter then the old SM420.
__________________
Life is too short to drive a boring vehicle. |
|
|
|
10-23-2011, 12:01 AM
|
#4 |
|
Registered User
Join Date: Nov 2010
Location: Spanish Fort,Alabama
Posts: 33
|
Re: What Did You Do With Your Truck Today ?
Started tearing it apart..I just got a 50 5 window...WOOO HOOOO
|
|
|
|
10-23-2011, 12:54 PM
|
#5 |
|
Registered User
Join Date: Oct 2011
Location: Buffalo, Texas
Posts: 4
|
Re: What Did You Do With Your Truck Today ?
Since I will be installing my new Fenton Headers and Offy dual single bbl intake soon (gonna have lots of question when that happens - lol) I decided to paint the Oil Filter Canister and move it from the intake manifold to the inner fender wall. The smudges are only reflections in the silver paint - - - that Ace Hwd paint sure held up good thru all my beating, banging, cussin' and fussin' !
   
__________________
"Real Cowboys are not a vanishing breed, they are just very hard to see from the Highway" |
|
|
|
10-23-2011, 05:32 PM
|
#6 |
|
Registered User
Join Date: Jan 2009
Location: pomfret, md
Posts: 163
|
Re: What Did You Do With Your Truck Today ?
I'm 8 screws short to have everything in place, but the bed wood is sealed, cut, and mounted. Still have to get the fenders widened but this will work for the time being.
|
|
|
|
10-24-2011, 06:18 PM
|
#7 |
|
Registered User
Join Date: Jun 2006
Location: Idaho
Posts: 8,800
|
Re: What Did You Do With Your Truck Today ?
Nothing, 64 Chevelle was feeling lonely and puked the heater core. I love old cars, 20 minutes to pull the heater housing (had it out 5 years ago so know the drill), $40 for a new core and probably 1/2 hour to get it back together.
__________________
1959 Chevy Short Fleetside w/ 74 4WD drive train (current project) OrrieG Build Thread 1964 Chevelle Malibu w/ 355-350TH (daily driver) Helpful AD and TF Manual Site Old Car Manual Project |
|
|
|
10-24-2011, 08:09 PM
|
#8 |
|
Registered User
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
|
Re: What Did You Do With Your Truck Today ?
i did some more work on the cross-member that attach the upper control arms for my rear suspension.
|
|
|
|
10-24-2011, 09:26 PM
|
#9 |
|
Registered User
Join Date: Aug 2011
Location: Kingsport, TN
Posts: 36
|
Re: What Did You Do With Your Truck Today ?
Not much, picked up some angle iron to use for floor brace. And rested from my 8 hour bash yesterday...... dang I hate getting old.....
__________________
We lust for what we want, weep for what we need... |
|
|
|
10-25-2011, 09:35 AM
|
#10 |
|
Registered User
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
|
Re: What Did You Do With Your Truck Today ?
I can't see it yet.
|
|
|
|
10-25-2011, 01:33 PM
|
#11 |
|
Registered User
Join Date: Apr 2011
Location: San Diego CA
Posts: 241
|
Re: What Did You Do With Your Truck Today ?
My garage is a pit of darkness smelling of leather dye.
The Apache is still running strong but I can feel it's hatred for me as I force it to go around with out a bed. The shame... |
|
|
|
10-25-2011, 10:18 PM
|
#12 | |
|
Registered User
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
|
Re: What Did You Do With Your Truck Today ?
Quote:
|
|
|
|
|
10-25-2011, 04:20 PM
|
#13 |
|
Registered User
Join Date: Oct 2011
Location: .
Posts: 106
|
Re: What Did You Do With Your Truck Today ?
New fan belt, new thermostat, fixed heater hoses, drained radiator and filled with fresh 50/50 (starting to get chilly here in New England)... Now all I need is a little more money to fall from the sky so I can get the two brake drums I need to finally put this thing on the road again. Really want to do it before the snow flies!
|
|
|
|
10-25-2011, 09:06 PM
|
#14 |
|
Registered User
Join Date: Aug 2011
Location: Kingsport, TN
Posts: 36
|
Re: What Did You Do With Your Truck Today ?
Welded in bracing for the passenger side floor and measured up templets for the flooring. Anybody give me some placement measurements for where the shifter comes up through the floor on a T-5 trans.
__________________
We lust for what we want, weep for what we need... |
|
|
|
10-25-2011, 10:40 PM
|
#15 |
|
Registered User
Join Date: Apr 2011
Location: San Diego CA
Posts: 241
|
Re: What Did You Do With Your Truck Today ?
Mark, I should finish this leather order by tomorow. I had "planed" to finish the bed this week but I need to address a new problem with the front brakes on the 59. Also I really need to get at the steering free lash so I dont go down the road fighting to stay in my lane. I want to take it on my first real trip in two weeks. A big party in Niland Calif AKA Slab City.
|
|
|
|
10-26-2011, 11:22 PM
|
#16 | |
|
Registered User
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
|
Re: What Did You Do With Your Truck Today ?
Quote:
what kind of leather work do you do? |
|
|
|
|
10-26-2011, 07:32 PM
|
#17 |
|
Registered User
Join Date: Sep 2011
Location: Golden Valley,MN
Posts: 639
|
Re: What Did You Do With Your Truck Today ?
Finished the metal work on the right rear fender, now a little filler and primer. Slowly but surely it will get finished!!
|
|
|
|
10-26-2011, 11:28 PM
|
#18 |
|
Registered User
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
|
Re: What Did You Do With Your Truck Today ?
still working on the cross member I may get to the control arm mounts after I get back from my cancer doctor tomorrow morning.
|
|
|
|
10-27-2011, 07:35 PM
|
#19 |
|
Registered User
Join Date: May 2010
Location: Lawrenceville, Ga
Posts: 2,648
|
Re: What Did You Do With Your Truck Today ?
Tightened up my hood hinges. Was going to buy new ones but decided to fix my old ones instead. Most of the wear was in the arms that hold up the hood where the bracket bolts to the hood. With the hood hinges raised to the max you could move the front of the hood up several inches due to the slop in the pivots. I punched out the pins and drilled out the holes using a 1/2 inch bit. I made some new pivot pins, put the bracket back on and welded the pins in. I ground the welds down to make the brackets fit back on to the hood as there isn't much room there. The other pivots were tight but I heated them and peened them to be sure.
The hinges feel tight now so maybe with new springs they will hold the hood up better than before. I made the pins out of 3/8th bolts. Just turned part of the head down to make the pivot and turned the body down to fit into the bracket, and cut them to length. |
|
|
|
10-27-2011, 08:20 PM
|
#20 |
|
Navy Radioman Veteran
Join Date: Jul 2007
Location: Western Kentucky
Posts: 1,350
|
Re: What Did You Do With Your Truck Today ?
Scraped my camaro project and moved the '57 Stepper to the front of the line.. Gonna be a busy winter in the garage ... can't wait to get out there next weekend and start cleaning up the garage.
__________________
1987 Chevrolet R10 Silverado BBC Build thread - SOLD 1986 GMC Sierra Classic - SOLD 1957 Chevy Step Side - At the Body Shop Daily Driver; 2005 Chevrolet Silverado 4x4 Z71 Stepside |
|
|
|
10-31-2011, 01:53 PM
|
#21 |
|
Registered User
Join Date: Aug 2010
Location: West Kelowna, BC
Posts: 488
|
Re: What Did You Do With Your Truck Today ?
took the box off (again!!!) started to tub the box for wider wheels, should be done tonight, plan on rounding the top rear edge after that and filling the steak pockets and front edge.
|
|
|
|
10-31-2011, 01:58 PM
|
#22 |
|
Senior Member
  
Join Date: Nov 2008
Location: Glendora, CA
Posts: 6,339
|
Re: What Did You Do With Your Truck Today ?
Wet sanded the lower part of my dash in the never-ending saga that the improving my interior has become. Pictures will be in my own thread one of these DECADES! Jeez.
|
|
|
|
10-31-2011, 02:29 PM
|
#23 |
|
Tripple Five Fanatic
Join Date: Sep 2006
Location: USA
Posts: 658
|
Re: What Did You Do With Your Truck Today ?
Took everything off the frontend in prepartion to install drop spindles. Not much else.
Tri5
__________________
1955 Chevy Stepside/LS1 drive train http://67-72chevytrucks.com/vboard/s...d.php?t=371513 |
|
|
|
10-31-2011, 08:37 PM
|
#24 | |
|
Registered User
Join Date: Jul 2011
Location: Auburn ca.
Posts: 2,886
|
Re: What Did You Do With Your Truck Today ?
Quote:
|
|
|
|
|
11-01-2011, 06:25 PM
|
#25 |
|
Registered User
Join Date: Mar 2011
Location: madison, NC
Posts: 81
|
Re: What Did You Do With Your Truck Today ?
(s10 /51 chevy) Painting brackets and gas tank straps. Was going to pick up the 51 chevy, but trailer has a flat. Stopped by a shop to see how much it would cost to sand blast the suspension parts.Father /son project.
|
|
|
 |
| Bookmarks |
|
|
Hybrid Mode
