Parting a 71 blazer 4x4 now - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**4X4GMC1972** · 04-09-2009, 11:02 PM

I'll take the upper radiator hose pipe. Do you still have the dipstick and tube?

Thanks
Todd

teeitup · 04-09-2009, 11:17 PM

Sorry Todd, the radiator hose just sold about an hour ago on here. Also sorry dipstick sold real quick. Thanks Randy

**4X4GMC1972** · 04-09-2009, 11:21 PM

No prob

teeitup · 04-11-2009, 11:09 AM

Still have quite a few parts for sale off this blazer!!!!! Thanks Randy

Critter · 04-11-2009, 01:06 PM

What shape is that radiator support in? Is it already spoken for?

reefer55 · 04-11-2009, 01:58 PM

Interested in the hatch seal that is attached to the tail gate. When the hatch is closed the hatch door seal sit against it. Do you have it still if so how much to get it to alberta canada.T5W2A5

teeitup · 04-12-2009, 07:25 PM

Critter, its has some rust on pass side, $25 for it. I can get pics if your still interested
reefer55, I still have it, its has a spot where rust hs gone through it. PIcs of it on page 5, leaning against white truck and the next pic is the rust spot. $20 plus shipping. I think USPS would ship it but not sure
Thanks Randy

Critter · 04-12-2009, 08:22 PM

Quote:

Originally Posted by teeitup

Critter, its has some rust on pass side, $25 for it. I can get pics if your still interested

Thanks Randy

Nah, don't worry about it, I have a decent one that is probably in about the same shape. I thought I might get lucky and find a spotless one.

If you still have it when I make the trip in a couple weeks I might take a look at it just for the heck of it. Thanks.

teeitup · 04-13-2009, 09:55 PM

About got it all parted, here is what is left and for sale
motor and tranny are sold
rear end is sold

teeitup · 04-13-2009, 09:56 PM

fffffffffffffff

teeitup · 04-13-2009, 09:57 PM

dddddddddddd

teeitup · 04-13-2009, 10:00 PM

sssssssssssss

teeitup · 04-13-2009, 10:05 PM

the above stuff is still for sale plus some of the stuff on page 6 in those pics. Thanks Randy

amcnut69 · 04-14-2009, 01:15 AM

Tailgate trim trim and molding to 95966?

justtime520 · 04-14-2009, 01:58 AM

Hey still got the brake booster and linkage and brackets is so how much to 85735

drivethechevy · 04-14-2009, 01:59 AM

is the engine cross member still available? if it is how much for it shiped to 56326, do u take snail mail payments?
thanks nate

teeitup · 04-14-2009, 08:11 AM

amcnut69, I'll get a pic of the tailgate trim, the lower bottom piece was real bad, 2 uppers were good
justtime520, I'll find a box and get you a quote tonight
drivethechevy, Nate, $70 shipped for motor crossmember
Thanks Randy

stealthy '69 · 04-14-2009, 08:19 AM

Are the wheels 15X8 or 15X10?

justtime520 · 04-14-2009, 10:25 AM

ah yek while your there do you have the dash wiring if its still in decent condition, mines toast

teeitup · 04-14-2009, 09:11 PM

Sorry guys got off work late, no pics tonight.
Stealthy 69, they 15x8, only for sale locally, sorry
justtime520, the wiring in the blazer was trash, sorry. I'll get a quote tomorrow night on the booster.
Thanks Randy

berencam · 04-14-2009, 10:28 PM

Also on that booster if he doesnt want it i could use a part off the booster. I need the front seal that goes on the rod that leads to the master cyl.

justtime520 · 04-15-2009, 12:19 AM

thanks let me know

teeitup · 04-15-2009, 08:32 AM

berencam, If justtime520 doesn't want it I have it sold locally
Justtime520, I'll for sure get a quote tonight
Thanks Randy

stealthy '69 · 04-15-2009, 08:57 AM

Quote:

Originally Posted by teeitup

Sorry guys got off work late, no pics tonight.
Stealthy 69, they 15x8, only for sale locally, sorry
justtime520, the wiring in the blazer was trash, sorry. I'll get a quote tomorrow night on the booster.
Thanks Randy

That's OK I'm looking for a set of 2 15X10s anyway.Thanks though.

berencam · 04-15-2009, 06:28 PM

Quote:

Originally Posted by teeitup

berencam, If justtime520 doesn't want it I have it sold locally
Justtime520, I'll for sure get a quote tonight
Thanks Randy

Your always parting these trucks when you run across another one will ya pm me and sell it to me?

04-09-2009, 11:02 PM	#151
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Re: Parting a 71 blazer 4x4 now I'll take the upper radiator hose pipe. Do you still have the dipstick and tube? Thanks Todd __________________ 1978 Dodge Omni

04-09-2009, 11:17 PM	#152
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now Sorry Todd, the radiator hose just sold about an hour ago on here. Also sorry dipstick sold real quick. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-09-2009, 11:21 PM	#153
4X4GMC1972 Registered User Join Date: Apr 2005 Location: Dallas, Texas Posts: 506	Re: Parting a 71 blazer 4x4 now No prob __________________ 1978 Dodge Omni

04-11-2009, 11:09 AM	#154
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now Still have quite a few parts for sale off this blazer!!!!! Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-11-2009, 01:06 PM	#155
Critter Future TOTM Winner Join Date: Aug 2006 Location: Bulverde, TX Posts: 2,692	Re: Parting a 71 blazer 4x4 now What shape is that radiator support in? Is it already spoken for? __________________ 72 Chevy CST K5 HIGHLANDER BLAZER Getting a 6.0,NV4500,NP205,14BFF (Currently laying all over the place in little pieces) 72 Chevy swb step-side "LS" 6.0 Here's a build thread of sorts 2002 HD2500 Crew Cab, 8.1L Allison 4x4 Daily Driver Check it out www.lsdyno.com

04-11-2009, 01:58 PM	#156
reefer55 Registered User Join Date: Oct 2008 Location: Edmonton, alberta, canada Posts: 189	Re: Parting a 71 blazer 4x4 now Interested in the hatch seal that is attached to the tail gate. When the hatch is closed the hatch door seal sit against it. Do you have it still if so how much to get it to alberta canada.T5W2A5

04-12-2009, 07:25 PM	#157
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now Critter, its has some rust on pass side, $25 for it. I can get pics if your still interested reefer55, I still have it, its has a spot where rust hs gone through it. PIcs of it on page 5, leaning against white truck and the next pic is the rust spot. $20 plus shipping. I think USPS would ship it but not sure Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-13-2009, 09:55 PM	#159
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now About got it all parted, here is what is left and for sale motor and tranny are sold rear end is sold Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-13-2009, 09:56 PM	#160
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now fffffffffffffff Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-13-2009, 09:57 PM	#161
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now dddddddddddd Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-13-2009 at 09:58 PM.

04-13-2009, 10:00 PM	#162
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now sssssssssssss Attached Images __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-13-2009, 10:05 PM	#163
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now the above stuff is still for sale plus some of the stuff on page 6 in those pics. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-14-2009, 01:15 AM	#164
amcnut69 Registered User Join Date: Nov 2008 Location: Oroville,Ca Posts: 11	Re: Parting a 71 blazer 4x4 now Tailgate trim trim and molding to 95966?

04-14-2009, 01:58 AM	#165
justtime520 Registered User Join Date: Mar 2009 Location: Tucson AZ Posts: 187	Re: Parting a 71 blazer 4x4 now Hey still got the brake booster and linkage and brackets is so how much to 85735

04-14-2009, 01:59 AM	#166
drivethechevy Registered User Join Date: May 2007 Location: Buffalo MN Posts: 606	Re: Parting a 71 blazer 4x4 now is the engine cross member still available? if it is how much for it shiped to 56326, do u take snail mail payments? thanks nate __________________ Trial and Error, its expensive but its a mistake i most likely wont make again 1971 chevy k10 custom deluxe http://67-72chevytrucks.com/vboard/s...d.php?t=341257 1968 chevy k/10 fleet http://67-72chevytrucks.com/vboard/s...d.php?t=334731 1948 desoto custom coupe fluid drive(family heirloom)



Register or Log In To remove these advertisements.

04-14-2009, 08:11 AM	#167
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now amcnut69, I'll get a pic of the tailgate trim, the lower bottom piece was real bad, 2 uppers were good justtime520, I'll find a box and get you a quote tonight drivethechevy, Nate, $70 shipped for motor crossmember Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

04-14-2009, 08:19 AM	#168
stealthy '69 '69 Chevy SWB Join Date: Feb 2009 Location: Surprise, Az Posts: 1,065	Re: Parting a 71 blazer 4x4 now Are the wheels 15X8 or 15X10?

04-14-2009, 10:25 AM	#169
justtime520 Registered User Join Date: Mar 2009 Location: Tucson AZ Posts: 187	Re: Parting a 71 blazer 4x4 now ah yek while your there do you have the dash wiring if its still in decent condition, mines toast

04-14-2009, 09:11 PM	#170
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now Sorry guys got off work late, no pics tonight. Stealthy 69, they 15x8, only for sale locally, sorry justtime520, the wiring in the blazer was trash, sorry. I'll get a quote tomorrow night on the booster. Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure" Last edited by teeitup; 04-14-2009 at 09:11 PM.

04-14-2009, 10:28 PM	#171
berencam Registered User Join Date: Aug 2007 Location: branson mo Posts: 933	Re: Parting a 71 blazer 4x4 now Also on that booster if he doesnt want it i could use a part off the booster. I need the front seal that goes on the rod that leads to the master cyl. __________________ 69 chevy c10 350 3 speed manual wood bed build thread here r.i.p. 70 c10 auto 350 build here

04-15-2009, 12:19 AM	#172
justtime520 Registered User Join Date: Mar 2009 Location: Tucson AZ Posts: 187	Re: Parting a 71 blazer 4x4 now thanks let me know

04-15-2009, 08:32 AM	#173
teeitup Just like to part out trucks!! Join Date: Nov 2001 Location: Meriden, Ks-North of Topeka 10 miles Posts: 27,396	Re: Parting a 71 blazer 4x4 now berencam, If justtime520 doesn't want it I have it sold locally Justtime520, I'll for sure get a quote tonight Thanks Randy __________________ 67 Chev swb stepside 4x4 283 4 speed SOLD 72 blazer 4x4 4 speed Cheyenne 72 GMC swb 4x4 fleet 4 speed, original paint 1958 Cameo (one of 1405 built, it was my dads) 2020 chevy Apex 4x4 crew cab 1969 Z28 with the 302 1980 chevy swb 4x4 1964 chevell Malibu SS 1976 K20, sold new originally out of my dads chevy dealership Members that I've met, over 200 probably closer to 300 in the 12 years I've been on this site, everyone I met "It was a pleasure"

Register or Log In To remove these advertisements.