Cheap trick patina 70 - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

slowcpe · 02-09-2015, 01:12 PM

Both would look great. I like the Gassers but two things (my opinion anyways) 1) the Intros will more than likely appeal to more people if you are building a truck to sell and 2) I'm not sure if the Gassers will "go out of style" where as the Intros are more of timeless design. Again my opinion.

From the looks of it, I just sell my truck and buy this one. I would be driving a killer truck far sooner and for more than likely less money.

But where's the fun in that right?

richeilers · 02-09-2015, 01:48 PM

Put all the trim on, then decide..........but IMHO - Gassers.

**superflysteiny** · 02-09-2015, 03:02 PM

Quote:

Originally Posted by Valley c10

Awesome build . Can't wait to see more . Love the motor . I vote for the gassers. Seeing them tucked up in the bed like that looks AWESOME

Ok thank you I am really not sure yet.

Quote:

Originally Posted by dunyet

Nice intake, I have the non coated version what injectors are you running with the Pro Flo XT fuel rails

I really like the intake. Sure the logo sucks but I can live with it.

Quote:

Originally Posted by nlped

I like the Gassers... They'd be bada$$ on my '77 T/A...I'd sure be interested in them if you decided to go another direction.

I dig the motor setup too

You may get them lol

Quote:

Originally Posted by 75Dually

Even though you would have to mess with the 5" bolt pattern the gassers have a better overall look to them. Gives the truck a very unique look...

Ya I agree the wheels are really cool and they are concave not a lot of guys running this wheel

Quote:

Originally Posted by youngrodder

I kinda like the gassers as well...Looks great.

Marc

Thanks brother

Quote:

Originally Posted by jlsanborn

Satin would be cool but I think polished would look better on the patina. Motor looks great!

Thank you

Quote:

Originally Posted by knomadd

I really like the gassers. Makes me think I want those on mine, but hearing about the bolt pattern issue, I don't think I'd go that route. They do look really good though.

You could get them in 5 on 5 I bought these originally for my transaxle truck I am building.

Quote:

Originally Posted by preacher anthony

I vote Gassers

Thank you

Quote:

Originally Posted by IWanna49

Definitely the ones from the beginning of this thread!!

Thank you

Quote:

Originally Posted by 1stchevy

I'm throwing my vote in for the brushed Intros and brushed trim. It would be different than all bling like I mostly see.

That's why I like them

Quote:

Originally Posted by aggie91

I like them both, but if you plan is the brushed handles, bumpers, and trim, then the gassers might look out of place unless you refinished them in a brushed look.

I agree

Quote:

Originally Posted by c10Dream'n

Intros are my vote.

Thank you

Quote:

Originally Posted by darkhorse970

I agree, if the Gassers are too much polished, how about a brushed finish on the flat areas of the centers with the rest staying polished?

My plan was to satin the centers of the gasser regardless

Quote:

Originally Posted by 9teen69

I like the "super sized" look of the stock motor. Yeh edelbrock cut and pasted their name too much but still awesome.
I vote for the Intros and the look of brushed trim - will be amazing.
Pic 5 is just a way more artistic shot and is unfair to the other photos...shows more of that badass patina look.

Thanks for including us!

I think we need to get the 22 in there with a tire stand back take some pics and see how it looks

**superflysteiny** · 02-09-2015, 03:14 PM

Quote:

Originally Posted by slowcpe

Both would look great. I like the Gassers but two things (my opinion anyways) 1) the Intros will more than likely appeal to more people if you are building a truck to sell and 2) I'm not sure if the Gassers will "go out of style" where as the Intros are more of timeless design. Again my opinion.

From the looks of it, I just sell my truck and buy this one. I would be driving a killer truck far sooner and for more than likely less money.

But where's the fun in that right?

I appreciate the your opinion. I want to hear it so I know were you guys stand.

Quote:

Originally Posted by richeilers

Put all the trim on, then decide..........but IMHO - Gassers.

Agree

**superflysteiny** · 02-09-2015, 03:20 PM

Quote:

Originally Posted by Precision Parts

Hey Eric, what's your plan with the truck when it's done?

Derek

Thank you for the support I am hanging the banner tonight. I appreciate all the support

jus2qwk · 02-09-2015, 04:12 PM

I vote Gassers

**superflysteiny** · 02-09-2015, 04:47 PM

Quote:

Originally Posted by jus2qwk

I vote Gassers

You guys are killing me lol

**superflysteiny** · 02-09-2015, 04:55 PM

13 for gassers
10 intro so far

Justin@EntropyRad · 02-09-2015, 04:59 PM

Love the satin wheels!

5150 · 02-09-2015, 05:16 PM

I vote Gassers, just to keep turning the knife in you.

flashed · 02-09-2015, 06:41 PM

Im gonna make it easy ,I like them both.

mooseknuckles · 02-09-2015, 06:49 PM

I have full confidence in you to do the right thing Eric...

brushed everything would be a killer look...

**superflysteiny** · 02-09-2015, 06:49 PM

Quote:

Originally Posted by Justin@EntropyRad

Love the satin wheels!

Ha ha me too

Quote:

Originally Posted by 5150

I vote Gassers, just to keep turning the knife in you.

Lol that hurts

Quote:

Originally Posted by flashed

Im gonna make it easy ,I like them both.

Good that works too

**GSFMECH** · 02-09-2015, 07:20 PM

I like both too,

Loving this build, can't wait to see it done.

**superflysteiny** · 02-09-2015, 08:37 PM

Quote:

Originally Posted by GSFMECH

I like both too,

Loving this build, can't wait to see it done.

Thank you once the suspension gets here we will get it done.

1stchevy · 02-09-2015, 08:39 PM

From the looks of your past trucks I'd say it's safe to say you make pretty good choices when it comes to these trucks. Do whatever you like, I'm sure either choice will look great!

**superflysteiny** · 02-09-2015, 11:07 PM

Quote:

Originally Posted by 1stchevy

From the looks of your past trucks I'd say it's safe to say you make pretty good choices when it comes to these trucks. Do whatever you like, I'm sure either choice will look great!

Thank you brother I appreciate it.

1stchevy · 02-09-2015, 11:18 PM

Quote:

Originally Posted by superflysteiny

Thank you brother I appreciate it.

No problem, I've got a ton a respect for what you're able to do with these trucks. I'm sure this one will be nothing short of a jaw dropper.....all over again! Aren't you glad you didn't quit working on these old c10's, I know I am!

JakeDW · 02-10-2015, 12:30 AM

I vote Intros and a front runner lol they look great brushed like that.

Jake

**superflysteiny** · 02-10-2015, 02:32 AM

Quote:

Originally Posted by JakeDW

I vote Intros and a front runner lol they look great brushed like that.

Jake

Thanks Jake that's funny. Thanks bud.

**superflysteiny** · 02-10-2015, 02:33 AM

Quote:

Originally Posted by 1stchevy

No problem, I've got a ton a respect for what you're able to do with these trucks. I'm sure this one will be nothing short of a jaw dropper.....all over again! Aren't you glad you didn't quit working on these old c10's, I know I am!

Yes I love them. It's like a drug to me lol

JNJchev77 · 02-10-2015, 12:23 PM

If you're going to satin the chrome on the vehicle then the intro's would look best. But I like both lol.... You'll definitely make the right choice, whatever you decide... I trust you!

On another note, why all the hate for Edelbrock logo? Is it just that it takes up most of the room on the piece or is there something Mr. Edelbrock did too you all?

79azc10 · 02-10-2015, 12:57 PM

Love what you have done so far , my vote is for the intros

SCOTI · 02-10-2015, 01:32 PM

Quote:

Originally Posted by JNJchev77

If you're going to satin the chrome on the vehicle then the intro's would look best. But I like both lol.... You'll definitely make the right choice, whatever you decide... I trust you!

On another note, why all the hate for Edelbrock logo? Is it just that it takes up most of the room on the piece or is there something Mr. Edelbrock did too you all?

I build stuff to look CLEAN.

I really dislike when the mfr. has their signature all over parts. Its one of the first things I look @ before purchasing as I want to make sure I can eliminate 99% of it if possible. I'll freely acknowledge the parts if/when asked & tell you how I like them but I cannot stand the signature prominently displayed otherwise. This goes for wheels, engine dress-up parts, & suspension.

JNJchev77 · 02-10-2015, 04:03 PM

Quote:

Originally Posted by SCOTI

I build stuff to look CLEAN.

I really dislike when the mfr. has their signature all over parts. Its one of the first things I look @ before purchasing as I want to make sure I can eliminate 99% of it if possible. I'll freely acknowledge the parts if/when asked & tell you how I like them but I cannot stand the signature prominently displayed otherwise. This goes for wheels, engine dress-up parts, & suspension.

Agreed, all about cleanliness when possible!! Just thought I missed something is all

Engine looks outstanding by the way Superfly!!! Even with the giant logo's

02-09-2015, 01:12 PM	#151
slowcpe Registered User Join Date: Sep 2013 Location: Evansville, IN Posts: 1,774	Re: Cheap trick patina 70 Both would look great. I like the Gassers but two things (my opinion anyways) 1) the Intros will more than likely appeal to more people if you are building a truck to sell and 2) I'm not sure if the Gassers will "go out of style" where as the Intros are more of timeless design. Again my opinion. From the looks of it, I just sell my truck and buy this one. I would be driving a killer truck far sooner and for more than likely less money. But where's the fun in that right? __________________ Ryan 1967 Red Stepside..."Laymond" http://67-72chevytrucks.com/vboard/s...40#post6441840 1972 Medium Olive SWB-Chester http://67-72chevytrucks.com/vboard/s...d.php?t=759628 1967/71 Blue SWB C10..SOLD 1977 SWB K10..my grandpa's.....never should have sold

02-09-2015, 01:48 PM	#152
richeilers Registered User Join Date: Aug 2014 Location: Florence Kentucky Posts: 107	Re: Cheap trick patina 70 Put all the trim on, then decide..........but IMHO - Gassers. __________________ Rich 1971 Blazer 2wd CST 454 http://67-72chevytrucks.com/vboard/s...d.php?t=641414

02-09-2015, 04:12 PM	#156
jus2qwk Registered User Join Date: Mar 2011 Location: Wytheville, Virginia Posts: 591	Re: Cheap trick patina 70 I vote Gassers __________________ Corey Jones Designs CoreyJonesDesigns on instagram Ole Silver- 1967 stepside http://www.hotrod.com/articles/1103c...chevrolet-c10/ http://67-72chevytrucks.com/vboard/s...d.php?t=598758

02-09-2015, 04:55 PM	#158
superflysteiny Senior Member Join Date: Nov 2008 Location: orangevale ca Posts: 4,630	Re: Cheap trick patina 70 13 for gassers 10 intro so far __________________ Tootsie build T Shirts (Supporting Colon Cancer research) Tootsie- a truck for my mother Pops 72 Cheyenne Dropmember build 67 Second Chance project from hell

02-09-2015, 04:59 PM	#159
Justin@EntropyRad Registered User Join Date: Jan 2015 Location: Charlotte, NC Posts: 483	Re: Cheap trick patina 70 Love the satin wheels!

02-09-2015, 05:16 PM	#160
5150 C10 Club Tennessee Join Date: Mar 2003 Location: White House, TN 37188 Posts: 8,279	Re: Cheap trick patina 70 I vote Gassers, just to keep turning the knife in you. __________________ Bryan www.gmtruckshow.com Project "Andes"-Halen's First Truck Project: Patina Burb for he is God’s servant for your good. But if you do wrong, be afraid, for he does not bear the sword in vain. For he is the servant of God, an avenger who carries out God’s wrath on the wrongdoer. Romans 13:4

02-09-2015, 06:41 PM	#161
flashed Registered User Join Date: Oct 2009 Location: canton ga Posts: 12,728	Re: Cheap trick patina 70 Im gonna make it easy ,I like them both.

02-09-2015, 06:49 PM	#162
mooseknuckles Registered User Join Date: Sep 2009 Location: ottawa,canada Posts: 4,550	Re: Cheap trick patina 70 I have full confidence in you to do the right thing Eric... brushed everything would be a killer look... __________________ my build threads '86 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=415628 '67 C10 http://67-72chevytrucks.com/vboard/s...d.php?t=635078 '63 GMC http://67-72chevytrucks.com/vboard/s...d.php?t=674682

02-09-2015, 07:20 PM	#164
GSFMECH On the road Join Date: Jan 2004 Location: NATCHITOCHES LOUISIANA Posts: 809	Re: Cheap trick patina 70 I like both too, Loving this build, can't wait to see it done. __________________ Mike Castro- 72 SWB. Ochre and White. 496/400 turbo, GV OD ,Dakota Digital dash , tilt, Vintage Air, PS, hydro boost, factory buckets, console, QA-1 Coil over suspension, 20/20"Billet Specialties Magnetos 72 SWB. Med blue. 454/400 turbo, tach, tilt, Stock AC, PS,PDB, factory buckets, console, ECE 4/6 drop w/ 2" blocks and C-notch, 20/20"Coys- Crashed and destroyed by drunk driver Sept 2019. New 72 build in the works. My new build thread "Castro" https://67-72chevytrucks.com/vboard/...d.php?t=820934 My old build thread, the blue truck http://67-72chevytrucks.com/vboard/s...d.php?t=271489 www.louisianaclassictruckclub.com

02-09-2015, 08:39 PM	#166
1stchevy Registered User Join Date: Jan 2010 Location: Randleman, NC Posts: 785	Re: Cheap trick patina 70 From the looks of your past trucks I'd say it's safe to say you make pretty good choices when it comes to these trucks. Do whatever you like, I'm sure either choice will look great!

02-10-2015, 12:30 AM	#169
JakeDW Registered User Join Date: Jan 2013 Location: KCMO? Posts: 453	Re: Cheap trick patina 70 I vote Intros and a front runner lol they look great brushed like that. Jake __________________ 61 Ford uni http://67-72chevytrucks.com/vboard/s...d.php?t=623422 ryans 77 c10 http://67-72chevytrucks.com/vboard/s...d.php?t=626594

02-10-2015, 12:23 PM	#172
JNJchev77 Registered Cruiser Join Date: Mar 2010 Location: Mesa, AZ Posts: 918	Re: Cheap trick patina 70 If you're going to satin the chrome on the vehicle then the intro's would look best. But I like both lol.... You'll definitely make the right choice, whatever you decide... I trust you! On another note, why all the hate for Edelbrock logo? Is it just that it takes up most of the room on the piece or is there something Mr. Edelbrock did too you all? __________________ 77' Chevy SB Dropmembered Front and Rear 5.3/4l60e combo Last edited by JNJchev77; 02-10-2015 at 12:30 PM.

02-10-2015, 12:57 PM	#173
79azc10 Registered User Join Date: Jan 2014 Location: Tucson az Posts: 171	Re: Cheap trick patina 70 Love what you have done so far , my vote is for the intros



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.