VA Parting this 66 - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**aotte1** · 11-16-2015, 03:33 AM

Jimmy,

Thanks for photo, could the number be 3923898?

How does the pulley grove/ belt area look?

Thanks,
Les

**PGSigns** · 11-16-2015, 07:26 AM

Yes that could be the number. A little surface rust from sitting and will clean up fine. I can put it in the lathe and clean them in short order.
Jimmy

**aotte1** · 11-16-2015, 08:53 PM

Jimmy,

PM sent

Les

65TRUK · 11-17-2015, 10:22 PM

Sorry I'm late to the conversation .... if you still have this bucket of rust are you willing to cut a donor panel off the cab?? I need passenger side, cab rear corner/back of cab. I can provide more specifics if this is something you are wiling to do. Note: I understand that the bottom rear cab corner is always rotted out ... what I need is kind of from the horizontal body line (mid-height on the cab) to the bottom of the cab from the door jam around to the back of the cab to the place where the back of the cab has the first pressed indent below the back window. Anyway; let me know if this is possible. Thanks, Rod

**PGSigns** · 11-18-2015, 07:58 AM

It left for the scrap yard Saturday.
Jimmy

65TRUK · 11-18-2015, 11:21 AM

Dang! Timing is everything! My loss. Thanks,

mrf1002u · 12-01-2015, 09:49 PM

Looking for a cast iron V-8 manual trans bellhousing. was this an 8 or six? Stick or Auto?

Thanks,
Larry W.

**PGSigns** · 12-02-2015, 07:39 AM

I sold the one in this truck. The bell housings will fit either engine.
Jimmy

Cypher · 12-04-2015, 11:32 PM

Do you have a choke cable and knob?

**PGSigns** · 12-05-2015, 10:55 AM

I may Will look today.
Jimmy

Cypher · 12-06-2015, 07:44 PM

Quote:

Originally Posted by PGSigns

I may Will look today.
Jimmy

Any luck
Posted via Mobile Device

**PGSigns** · 12-06-2015, 09:57 PM

The only one I could find is about 28" long. It had been cut sometime in its life.
Jimmy

billetproofcustoms · 09-06-2016, 02:52 PM

radiator support (core support) still available? shipped to TX 79424?

**PGSigns** · 09-06-2016, 09:07 PM

Bottom was not to good on that one.
Jimmy

Josephguzman · 09-08-2016, 09:14 PM

Did you buy this out of Texas?? I swear I almost bought this truck because it had a full a/c set up in it but the rest was just parts to sell!

**PGSigns** · 09-09-2016, 07:03 AM

Nope came out of Virginia and had been here all its life. No AC in this one.
Jimmy

scum1 · 09-10-2016, 08:04 PM

not sure how much of the body molding/trim cypher end up taking, but i am looking for ONE piece, I'm missing the upper trim piece on the door. just the one.IF you got one still ill take it. shipped to 89139

**PGSigns** · 09-10-2016, 08:27 PM

I do still have some door pieces. I need to dig them out and see if I have a good one left.
Jimmy

*ck5566* · 09-12-2016, 02:55 AM

Any engine parts? Like Ram Horns & Power Steering pump and brackets. shipping to 92284

**PGSigns** · 09-12-2016, 06:47 AM

No power steering stuff but I do have a set of 66 exhaust manifolds that came of my truck.
Jimmy

*ck5566* · 09-12-2016, 10:45 AM

Quote:

Originally Posted by PGSigns

No power steering stuff but I do have a set of 66 exhaust manifolds that came of my truck.
Jimmy

Pic's & $$.$$ would be good, whats both of there Casting Numbers??

scum1 · 09-12-2016, 05:11 PM

Quote:

Originally Posted by PGSigns

I do still have some door pieces. I need to dig them out and see if I have a good one left.
Jimmy

that would be great..the pieces I'm working with now are in rough shape as well so it might not be a problem..im not goin for looks, more just completeness lol...please let me know!! its hard to find single pieces around here.

**PGSigns** · 09-12-2016, 08:52 PM

Scum1 I did find a door piece. I cleaned the dirt off and it looks ok. A couple of dings is it. I'll get the picture off my phone in the morning.
CK5566 I got a couple of pics of the manifolds for you.
Jimmy

*ck5566* · 09-12-2016, 09:44 PM

Quote:

Originally Posted by PGSigns

Scum1 I did find a door piece. I cleaned the dirt off and it looks ok. A couple of dings is it. I'll get the picture off my phone in the morning.
CK5566 I got a couple of pics of the manifolds for you.
Jimmy

Pic's are great but whats there Casting Numbers, Thanks

AustinBelair · 09-12-2016, 10:44 PM

Emergency brake parts? I need the clips, the long rods, the short funky shaped parts and other parts. Basically everything but the cables.

11-16-2015, 03:33 AM	#151
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: Parting this 66 Jimmy, Thanks for photo, could the number be 3923898? How does the pulley grove/ belt area look? Thanks, Les

11-16-2015, 07:26 AM	#152
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 Yes that could be the number. A little surface rust from sitting and will clean up fine. I can put it in the lathe and clean them in short order. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

11-16-2015, 08:53 PM	#153
aotte1 Senior Member Join Date: Oct 2013 Location: lousiville Ky Posts: 2,637	Re: Parting this 66 Jimmy, PM sent Les

11-17-2015, 10:22 PM	#154
65TRUK Registered User Join Date: Jul 2012 Location: Midland, MI Posts: 46	Re: Parting this 66 Sorry I'm late to the conversation .... if you still have this bucket of rust are you willing to cut a donor panel off the cab?? I need passenger side, cab rear corner/back of cab. I can provide more specifics if this is something you are wiling to do. Note: I understand that the bottom rear cab corner is always rotted out ... what I need is kind of from the horizontal body line (mid-height on the cab) to the bottom of the cab from the door jam around to the back of the cab to the place where the back of the cab has the first pressed indent below the back window. Anyway; let me know if this is possible. Thanks, Rod

11-18-2015, 07:58 AM	#155
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 It left for the scrap yard Saturday. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

11-18-2015, 11:21 AM	#156
65TRUK Registered User Join Date: Jul 2012 Location: Midland, MI Posts: 46	Re: Parting this 66 Dang! Timing is everything! My loss. Thanks,

12-01-2015, 09:49 PM	#157
mrf1002u Registered User Join Date: Feb 2015 Location: Yulee, Florida Posts: 142	Re: Parting this 66 Looking for a cast iron V-8 manual trans bellhousing. was this an 8 or six? Stick or Auto? Thanks, Larry W.

12-02-2015, 07:39 AM	#158
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 I sold the one in this truck. The bell housings will fit either engine. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

12-04-2015, 11:32 PM	#159
Cypher Registered User Join Date: Jul 2015 Location: Arleta Ca. Posts: 44	Re: Parting this 66 Do you have a choke cable and knob?

12-05-2015, 10:55 AM	#160
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 I may Will look today. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

12-06-2015, 09:57 PM	#162
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 The only one I could find is about 28" long. It had been cut sometime in its life. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

09-06-2016, 02:52 PM	#163
billetproofcustoms Registered User Join Date: Aug 2010 Location: lubbock texas Posts: 96	Re: Parting this 66 radiator support (core support) still available? shipped to TX 79424?

09-06-2016, 09:07 PM	#164
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 Bottom was not to good on that one. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

09-08-2016, 09:14 PM	#165
Josephguzman Registered User Join Date: Sep 2016 Location: Beaumont Posts: 14	Re: Parting this 66 Did you buy this out of Texas?? I swear I almost bought this truck because it had a full a/c set up in it but the rest was just parts to sell!

09-09-2016, 07:03 AM	#166
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 Nope came out of Virginia and had been here all its life. No AC in this one. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic



Register or Log In To remove these advertisements.

09-10-2016, 08:04 PM	#167
scum1 Registered User Join Date: Apr 2010 Location: las vegas Posts: 299	Re: Parting this 66 not sure how much of the body molding/trim cypher end up taking, but i am looking for ONE piece, I'm missing the upper trim piece on the door. just the one.IF you got one still ill take it. shipped to 89139

09-10-2016, 08:27 PM	#168
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 I do still have some door pieces. I need to dig them out and see if I have a good one left. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

09-12-2016, 02:55 AM	#169
ck5566 Account Suspended Join Date: Apr 2016 Location: Rancho Mirage, Ca. Posts: 875	Re: Parting this 66 Any engine parts? Like Ram Horns & Power Steering pump and brackets. shipping to 92284

09-12-2016, 06:47 AM	#170
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 No power steering stuff but I do have a set of 66 exhaust manifolds that came of my truck. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

09-12-2016, 08:52 PM	#173
PGSigns Senior Member Join Date: Jan 2011 Location: Hayes Va Posts: 4,569	Re: Parting this 66 Scum1 I did find a door piece. I cleaned the dirt off and it looks ok. A couple of dings is it. I'll get the picture off my phone in the morning. CK5566 I got a couple of pics of the manifolds for you. Jimmy __________________ 60 to 66 Chevy and GMC window decals http://67-72chevytrucks.com/vboard/s...d.php?t=661131 Good friends, good food and a hotrod what else do you need? 1966 BBW long fleet Daily driver 1965 BBW short fleet Sold and going to a good home 1965 Suburban 2003 3500 Duramax 2005 Ultra Classic

09-12-2016, 10:44 PM	#175
AustinBelair Registered User Join Date: Apr 2005 Location: Austin, Texas Posts: 294	Re: Parting this 66 Emergency brake parts? I need the clips, the long rods, the short funky shaped parts and other parts. Basically everything but the cables. __________________ My mother is a recent cancer survivor and this truck build is for her

Register or Log In To remove these advertisements.