** YOUNG FRANKENSTEIN ** The truck Chevrolet should have built. - Page 70 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**68 Four on the Floor** · 09-21-2011, 10:03 PM

Amazing paint work. Good to see another Drew on here!

drewskiren · 09-21-2011, 11:56 PM

Only 2 more days of painting left!!!!

Redid the bed uppers and they look good - slight orange peel in spots, but I'm not going to risk another wet coat and have it run. It will be easy to buff out.

Tailgate blue is done, but has a few trash imperfections that will need a buffer.

Misc. little parts getting their share of love.

Tomorrow white on the bed, rear door, and tailgate. Friday flip side of misc. parts and hood touch-up. SATURDAY--- wait for it,.......... wait for it,........... Cab goes on the frame!!!

**oldman3** · 09-21-2011, 11:59 PM

Looking real good.....Jim

ajgriffin · 09-22-2011, 12:26 AM

Looks awesome! I really like the color and how everything is turning out. You handled the runs great too! I have a question though, mind you I have never painted anything other than my house, but how do you make sure the lines are perfect from panel to panel if you masked them off separately? Is the trim big enough to cover any imperfections there?
Posted via Mobile Device

drewskiren · 09-22-2011, 12:34 AM

Quote:

Originally Posted by ajgriffin

Looks awesome! I really like the color and how everything is turning out. You handled the runs great too! I have a question though, mind you I have never painted anything other than my house, but how do you make sure the lines are perfect from panel to panel if you masked them off separately? Is the trim big enough to cover any imperfections there?
Posted via Mobile Device

The mounting holes for the trim are directly in the center of the trim. The top of the lower trim aligns with the body line. The lower trim is exactly 4 inches, so my mounting holes are 2 inches below the body line. I put my paint cut line exactly in the middle of my mounting holes on every panel. I will be aligning the body line on all of the panels, so my trim will also line up as well as my paint lines (which are really covered by the trim anyway). Although the edges may peek out a little.

VA72C10 · 09-22-2011, 01:17 AM

Looking great! Is it Saturday yet????

hgs_notes · 09-22-2011, 07:37 AM

Here's a tip when painting the bolts. Just get a cardboard box and punch holes in it for the bolts to push into, then you can spray the whole head and not have them blowing around.

BTW, I only see 2 sets of door hinges. I know you didn't build a 4th door, but I think you still have a 3rd door.

mcbassin · 09-22-2011, 08:41 AM

Your paint looks great Drew! Keep up all that hard work. Saturday will be here quick enough.

drewskiren · 09-22-2011, 09:27 AM

Quote:

Originally Posted by hgs_notes

Here's a tip when painting the bolts. Just get a cardboard box and punch holes in it for the bolts to push into, then you can spray the whole head and not have them blowing around.

BTW, I only see 2 sets of door hinges. I know you didn't build a 4th door, but I think you still have a 3rd door.

I have done the bolt hole trick, but last night was just ready to shoot.

The other hinges are still on the rear door, already painted.

Cameron 1137 · 09-22-2011, 09:53 AM

Paint looks outstanding Drew! nice work... looking forward to saturday

**Dieselwrencher** · 09-22-2011, 03:29 PM

Looks awesome! You're moving right along!

sboris · 09-22-2011, 04:02 PM

I`m diggin it. Can`t wait to see the head on the Monster!

1985-GMC · 09-22-2011, 05:01 PM

Extremely jealous dude, it looks sweet!

**68 Four on the Floor** · 09-22-2011, 06:13 PM

Looking even better! But a question... why not hang all the small parts to get both sides at the same time?

thirdstreettito · 09-22-2011, 06:39 PM

Looking good!

drewskiren · 09-22-2011, 07:11 PM

Quote:

Originally Posted by 68 Four on the Floor

Looking even better! But a question... why not hang all the small parts to get both sides at the same time?

I'll be painting blue one last time anyway, so its no problem to flip and do the other side. Mainly though, it was late and I didn't want to spend the time or effort finding wire, creating a hanging spot etc, and - you still end up with a wire mark of no paint.

drewskiren · 09-22-2011, 07:14 PM

I bought some very special grade 8 bolts today..... can you guess what they are for???

**Dieselwrencher** · 09-22-2011, 07:17 PM

Body mount bolts!

drewskiren · 09-22-2011, 11:55 PM

Quote:

Originally Posted by Dieselwrencher

Body mount bolts!

Right you are sir!

drewskiren · 09-23-2011, 12:00 AM

Almost done.

The white turned out great finally on the rear door.

I almost forgot the tailgate handle, I was planning on painting it blue, until I saw where it mounted.

"Bowed and dented" tailgate looks like a million bucks now! Thanks Chuck for letting me buy it.

coops714x4 · 09-23-2011, 02:02 AM

Drew HURRY UP AND GET IT TOGETHER!!!! man I can't wait to see it finished, its gonna look GREAT!!!

71Sleeper · 09-23-2011, 04:58 AM

Drew, everyone is watching your build on the edge of their seat. We all should be there when you take Young Frankenstein on its maiden voyage. I can just here all the screaming and clapping as you pass by. THAT WOULD BE AWESOME!!!!! Young Frankenstein should without a doubt by on covers of every truckin mag out there. Just my opinion........

**oldman3** · 09-23-2011, 10:41 AM

Drew, real happy for you, you are getting close now, still lots of work, but your there...Jim

thirdstreettito · 09-23-2011, 12:10 PM

Nice!

**67cheby** · 09-23-2011, 12:16 PM

come on .....get that tape off

09-21-2011, 10:03 PM	#1726
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Amazing paint work. Good to see another Drew on here!

09-21-2011, 11:56 PM	#1727
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Only 2 more days of painting left!!!! Redid the bed uppers and they look good - slight orange peel in spots, but I'm not going to risk another wet coat and have it run. It will be easy to buff out. Tailgate blue is done, but has a few trash imperfections that will need a buffer. Misc. little parts getting their share of love. Tomorrow white on the bed, rear door, and tailgate. Friday flip side of misc. parts and hood touch-up. SATURDAY--- wait for it,.......... wait for it,........... Cab goes on the frame!!! Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife! Last edited by drewskiren; 09-23-2011 at 12:25 AM.

09-21-2011, 11:59 PM	#1728
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looking real good.....Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

09-22-2011, 12:26 AM	#1729
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 581	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looks awesome! I really like the color and how everything is turning out. You handled the runs great too! I have a question though, mind you I have never painted anything other than my house, but how do you make sure the lines are perfect from panel to panel if you masked them off separately? Is the trim big enough to cover any imperfections there? Posted via Mobile Device __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

09-22-2011, 01:17 AM	#1731
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looking great! Is it Saturday yet???? __________________ Looking for a 67-72 swb or blazer project in or around VA.

09-22-2011, 07:37 AM	#1732
hgs_notes GEARHEAD Join Date: Aug 2003 Location: MN Posts: 6,121	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Here's a tip when painting the bolts. Just get a cardboard box and punch holes in it for the bolts to push into, then you can spray the whole head and not have them blowing around. BTW, I only see 2 sets of door hinges. I know you didn't build a 4th door, but I think you still have a 3rd door. __________________ If no one knows what you're doing, they can't tell you you're doing it wrong HG's Dream Car Build - Shelby Cobra Kit Build your own adjustable track bar 71 Long Fleet C/10 72 Jimmy 4x4 (Junkyard Jimmy) HG's Plow Truck '78 K35 Dually Bigass Farm Truck HG's thread of miscellaneous stuff

09-22-2011, 08:41 AM	#1733
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Your paint looks great Drew! Keep up all that hard work. Saturday will be here quick enough. __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

09-22-2011, 09:53 AM	#1735
Cameron 1137 Registered User Join Date: Feb 2011 Location: Pittsfield, Ma Posts: 497	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Paint looks outstanding Drew! nice work... looking forward to saturday __________________ Cam 1972 Chevy C/10 "Custom Cruiser Project" Build Thread 1961 Olds Super 88 (Daily) 1966 Chevy Corvair 500, "Marigold" SOLD 2005 Subaru Outback Wagon DEAD 2008 Pontiac G8, New Winter/Daily

09-22-2011, 03:29 PM	#1736
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looks awesome! You're moving right along! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*

09-22-2011, 04:02 PM	#1737
sboris Registered User Join Date: Jun 2011 Location: Osceola, Ia Posts: 2,016	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I`m diggin it. Can`t wait to see the head on the Monster! __________________ Shawn 68 chevy K/20 05 chevy 3/4 4x4 71 short step-sold 71 chevy Beauville van My build. http://67-72chevytrucks.com/vboard/s...d.php?t=633039

09-22-2011, 05:01 PM	#1738
1985-GMC Chevy Enthusiast Join Date: Jul 2009 Location: Canyon Lake Texas Posts: 2,024	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Extremely jealous dude, it looks sweet! __________________ Tony 1985 GMC K2500 restoration Project: Rust, White & Blue 1989 Chevy R3500 CC Cummins & 4X4 swap some day... 1989 Burb (D60, 14BFF, 12V, NV4500, NP205, 37" tires in progress)

09-22-2011, 06:13 PM	#1739
68 Four on the Floor Senior Member Join Date: Jun 2011 Location: Washburn, IA Posts: 600	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looking even better! But a question... why not hang all the small parts to get both sides at the same time?

09-22-2011, 06:39 PM	#1740
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Looking good! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

09-22-2011, 07:14 PM	#1742
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. I bought some very special grade 8 bolts today..... can you guess what they are for??? __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

09-22-2011, 07:17 PM	#1743
Dieselwrencher 6>8 Plugless........ Join Date: Sep 2007 Location: Prairie City, Ia Posts: 17,140	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Body mount bolts! __________________ Ryan 1972 Chevy Longhorn K30 Cheyenne Super, 359 Inline 6 cylinder, Auto Trans, Tilt, Diesel Tach/Vach, Buckets, Rare Rear 4-link and air ride option Build Thread 1972 GMC Sierra Grande Longhorn 4x4 1972 Chevy Cheyenne Super K20 Long Step side tilt, tach, tow hooks, AC, 350 4 speed 1972 C10 Suburban Custom Deluxe 1969 Chevy milk truck 1971 Camaro RS 5.3 BTR STG3 Cam Super T10 1940 Ford 354 Hemi 46RH Ford 9" on air ride huge project *Tired of spark plugs? Check this out.*



Register or Log In To remove these advertisements.

09-23-2011, 12:00 AM	#1745
drewskiren Lucky Teter at the wheel Join Date: Aug 2009 Location: Memphis, TN Posts: 1,896	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Almost done. The white turned out great finally on the rear door. I almost forgot the tailgate handle, I was planning on painting it blue, until I saw where it mounted. "Bowed and dented" tailgate looks like a million bucks now! Thanks Chuck for letting me buy it. Attached Images __________________ Drew YOUNG FRANKENSTEIN (Finished with MAJOR Surgery - IT'S ALIVE!!!) The Bride is currently under the knife!

09-23-2011, 02:02 AM	#1746
coops714x4 Registered User Join Date: Mar 2011 Location: Cement Oklahoma Posts: 916	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Drew HURRY UP AND GET IT TOGETHER!!!! man I can't wait to see it finished, its gonna look GREAT!!! __________________ 1971 K20, Coop's beast (project) 1972 C30 wrecker, "Big Ernest" (SOLD) 1975 K5 Blazer (wife's toy) she got it in the divorce 2014 Street Glide Special 1983 K20 Big Block, auto (work horse)

09-23-2011, 04:58 AM	#1747
71Sleeper Registered User Join Date: Jul 2011 Location: Phenix City, AL Posts: 993	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Drew, everyone is watching your build on the edge of their seat. We all should be there when you take Young Frankenstein on its maiden voyage. I can just here all the screaming and clapping as you pass by. THAT WOULD BE AWESOME!!!!! Young Frankenstein should without a doubt by on covers of every truckin mag out there. Just my opinion........ __________________ 71 Ol' Blue: http://67-72chevytrucks.com/vboard/s...d.php?t=474752 Carving the Jake-olantern: http://67-72chevytrucks.com/vboard/s...d.php?t=679537

09-23-2011, 10:41 AM	#1748
oldman3 Senior Member Join Date: Mar 2011 Location: West Plains, Missouri Posts: 7,555	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Drew, real happy for you, you are getting close now, still lots of work, but your there...Jim __________________ my build thread: http://67-72chevytrucks.com/vboard/s...d.php?t=459839 Jimbo's long bed step build:http://67-72chevytrucks.com/vboard/s...t=464626<br />

09-23-2011, 12:10 PM	#1749
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. Nice! __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

09-23-2011, 12:16 PM	#1750
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: YOUNG FRANKENSTEIN The truck Chevrolet should have built. come on .....get that tape off __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

Register or Log In To remove these advertisements.