Project "Jezebel" - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mjensen · 06-14-2011, 10:50 PM

Personally, I like the look of the 67-68 over the 69-72 (even though they all look great). Whatever you decide, I'm sure it will be over the top

sgaylord · 06-15-2011, 11:29 AM

Quote:

funkytechmonkey
Re: Project "Jezebel"
Sgaylord, will you come to Atlanta and help me with my cab

I bought a 71 that I am putting a 67/68 front end on. To me the slant of the hood just makes the truck look soooo much better.

Thanks Brian, after looking at your build it appears we have a bit in common. I too am an IT geek. I am on the UNIX support side myself. It's funny to see how many IT people migrate to old vehicles.

I am really digging your build, you may feel you don't know what you are doing but the results are saying something entirely different.

I would not mind at all helping you out if you were closer. I don't think that fridge of yours holds enough beer for that long of a trip.

Like you it's the 67/68 hood that I like, and that's the reason for this whole quandary.

Quote:

mjensen
Re: Project "Jezebel"
Personally, I like the look of the 67-68 over the 69-72 (even though they all look great). Whatever you decide, I'm sure it will be over the top

I have to agree they all do look great. Thanks man

Steve

funkytechmonkey · 06-15-2011, 12:54 PM

Thats awesome... I was a Citrix admin for 8 years. Just got out of that here recently and bought a restaurant franchise. Thanks for the compliments, Its pretty awesome to hear that from other people you look up to on these forums. I cant find anyone around here that could give me lessons on how to do rust repair so I am VERY intimidated by the cab. Im sure once I get into it I will feel better about it. Im almost tempted to find a local tech school and see if I can take some classes.

sgaylord · 06-15-2011, 01:07 PM

You probably have heard this before but look at rust repair like peeling an onion. Take it one layer at a time till you get the the part you want to keep. Then work your way back out from there. Please feel free to reach out to me if you get stuck. I would be glad to help where I can. PM me and I will send you my phone #.

You have to let me know what your restaurant's name is and if I'm in your area I will have to drop in!

Steve

funkytechmonkey · 06-15-2011, 04:07 PM

My restaurant is called Jack's New Yorker Deli I built the one in johns creek, ga. www.jacksnyd.com

Back to your build....did you build the cart you are using to roll around your cab? If so, do you have the specs on it? I'd like to built something like that.
Posted via Mobile Device

sgaylord · 07-12-2011, 05:49 PM

Ok guys I guess it's time for an update. Some progress is better than no progress right?

I have stripped all of the paint from the outside of the cab, etch primed and shot it with 2k. More bodywork still to do and right now I have the cab back on the frame and doing some tweaks on the door fitment. Here are the pics of all that.

That's 9 layers of paint!

Name: 101_1457.JPG
Views: 1133
Size: 18.4 KB

Name: 101_1464.JPG
Views: 1162
Size: 16.7 KB

Nice clean metal underneath. You can see the 3m seam sealer in the drip rail in this pic.
Name: 101_1483.JPG
Views: 1160
Size: 23.7 KB

Name: 101_1485.JPG
Views: 1162
Size: 12.4 KB

Bodywork, bodywork, and more bodywork...
Name: 101_1486.JPG
Views: 1158
Size: 18.0 KB

sgaylord · 07-12-2011, 05:52 PM

Name: 101_1490.JPG
Views: 1159
Size: 20.4 KB

Name: 101_1491.JPG
Views: 1149
Size: 21.2 KB

Name: 101_1492.JPG
Views: 1146
Size: 19.9 KB

Name: 101_1496.JPG
Views: 1159
Size: 18.7 KB

Im kinda digging the drab green color. Gives me an idea for one of my other projects... Can you say, salute to the good ole, U.S.M.C...

Name: 101_1499.JPG
Views: 1254
Size: 9.2 KB

sgaylord · 07-12-2011, 05:56 PM

That's about it for now. I will have to take some pics of the cab on the frame and also reveal the tires and wheels... Stay tuned my gear head brethren!

Steve

mcbassin · 07-12-2011, 05:57 PM

Great progress and I like the green primer too.
Posted via Mobile Device

litew8 · 07-12-2011, 06:00 PM

Quote:

Originally Posted by sgaylord

Im kinda digging the drab green color. Gives me an idea for one of my other projects... Can you say, salute to the good ole, U.S.M.C...

Attachment 773069

Oorah!

**chevy_man5** · 11-01-2011, 08:30 PM

I just read through your thread. WOW!! If I run into that much rust, I will probably chicken out!! LOL You have done some amazing work! Keep it up!

mcbassin · 11-01-2011, 09:34 PM

Any updates lately?

sgaylord · 11-02-2011, 08:16 AM

I took some time off to do some work around the house. I have recently started back working on Jezebel. I plan to start posting updates real soon.

oldtinrods · 11-02-2011, 03:33 PM

Great work. I really like how you are smoothing everything out. Subscribing..

**fakerwade** · 11-02-2011, 11:34 PM

Holy crap SGAYLORD!! I thought I was crazy!! That's just totally sick, but your doing really great. How do I say this politely,,,, Some of you guys start with some really rusty $h1t. I can't believe your saving her. Around here we call that a poor excuse for a parts truck. I guess we're blessed to live in a low humidity area. Nice job on the truck and the camaro (totally sweet). Keep up the good work.

sgaylord · 12-13-2011, 04:58 PM

I really needed to get some updated progress pics out so you guys can see where I am so here goes.

Noticed the door still stuck out more than I wanted at the rocker so I did the typical rocker slice, dice, and fill to bring it out a bit.

Name: 101_1603.JPG
Views: 929
Size: 12.5 KB

Name: 101_1603.JPG
Views: 929
Size: 12.5 KB

Name: 101_1615.JPG
Views: 931
Size: 12.8 KB

Name: 101_1621.JPG
Views: 930
Size: 12.4 KB

Below you will see the tools I used to grind down the welds and smooth it out.
Name: 101_1627.JPG
Views: 933
Size: 14.5 KB

Name: 101_1629.JPG
Views: 932
Size: 10.3 KB

sgaylord · 12-13-2011, 05:06 PM

The next project was the captive nuts in the "A" pillar were getting stripped from all the removal and installation of the door during fitting. I wish I would have done this when I had the "A" pillar open but oh well.

Had to cut an access into the "A" pillar pocket to access the cage that held in the captive nuts that the door hinges bolts to.
Name: 101_1633.JPG
Views: 940
Size: 14.4 KB

Name: 101_1633.JPG
Views: 940
Size: 14.4 KB

You cant see it too well here but the threads were pretty worn so the only option was to weld it shut and tap it back out.
Name: 101_1636.JPG
Views: 929
Size: 18.0 KB

Name: 101_1636.JPG
Views: 929
Size: 18.0 KB

Welded, drilled, and tapped for the 3/8-24 bolts.
Name: 101_1639.JPG
Views: 938
Size: 18.7 KB

sgaylord · 12-13-2011, 05:13 PM

That pretty much gets you up to date to where I am at the moment. Here are some current pics with the cab on the frame. As well as pics of the wheels and tires that I just realized I did not post before. Feedback welcome!

Name: 101_1744.JPG
Views: 933
Size: 21.3 KB

Name: 101_1744.JPG
Views: 933
Size: 21.3 KB

Name: 101_1745.JPG
Views: 937
Size: 23.0 KB

Name: 101_1747.JPG
Views: 932
Size: 19.4 KB

Name: 101_1748.JPG
Views: 931
Size: 20.7 KB

Name: 101_1749.JPG
Views: 930
Size: 23.0 KB

mcbassin · 12-13-2011, 05:15 PM

Man, super attention to details! couple of questions,
Where did you get your rockers?
Where did you get the 3m seam sealer? do you have a part number?
What kind of primer is that? Epoxy?
Are you just using a D/A sander to get your paint to bare metal?
sorry for the questions, I'm getting ready to do my second cab for my project.
thanks

sgaylord · 12-13-2011, 05:34 PM

Hey Mike,

No problem about the questions.

Where did you get your rockers?
They were made by Tri-plus. I think I picked them up from a vendor at the Daytona Turkey Rod Run.

Where did you get the 3m seam sealer? do you have a part number?
I got it at Orileys. Don't have the part # but if you cant find it send me a PM and I will ask my buddy who manages my local store for the PN.

What kind of primer is that? Epoxy?
Sherwin Williams Etch on bare metal and their 2k on top of that.

Are you just using a D/A sander to get your paint to bare metal?
Exactly, DA set to lock with 80 grit

Steve

**fakerwade** · 12-13-2011, 09:38 PM

Fricken awesome, thanks for the update.

mjensen · 12-13-2011, 11:45 PM

Yeah! Progress!

Looking very nice! I love those wheels.

mcbassin · 12-14-2011, 12:11 AM

Quote:

Originally Posted by sgaylord

Hey Mike,

No problem about the questions.

Where did you get your rockers?
They were made by Tri-plus. I think I picked them up from a vendor at the Daytona Turkey Rod Run.

Where did you get the 3m seam sealer? do you have a part number?
I got it at Orileys. Don't have the part # but if you cant find it send me a PM and I will ask my buddy who manages my local store for the PN.

What kind of primer is that? Epoxy?
Sherwin Williams Etch on bare metal and their 2k on top of that.

Are you just using a D/A sander to get your paint to bare metal?
Exactly, DA set to lock with 80 grit

Steve

Thanks for all the help Steve. I think the last rockers I got from LMC were triplus? They are a little on the short side just like yours.

I hope you guys thump the bayou bengals

**67cheby** · 12-14-2011, 06:31 PM

nice !!! i LOVE the wheels !

Jarwood · 12-14-2011, 09:39 PM

Awesome work and detail. I can only hope to be that good one day!

06-14-2011, 10:50 PM	#176
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: Project "Jezebel" Personally, I like the look of the 67-68 over the 69-72 (even though they all look great). Whatever you decide, I'm sure it will be over the top __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

06-15-2011, 12:54 PM	#178
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: Project "Jezebel" Thats awesome... I was a Citrix admin for 8 years. Just got out of that here recently and bought a restaurant franchise. Thanks for the compliments, Its pretty awesome to hear that from other people you look up to on these forums. I cant find anyone around here that could give me lessons on how to do rust repair so I am VERY intimidated by the cab. Im sure once I get into it I will feel better about it. Im almost tempted to find a local tech school and see if I can take some classes. __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build

06-15-2011, 01:07 PM	#179
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Project "Jezebel" You probably have heard this before but look at rust repair like peeling an onion. Take it one layer at a time till you get the the part you want to keep. Then work your way back out from there. Please feel free to reach out to me if you get stuck. I would be glad to help where I can. PM me and I will send you my phone #. You have to let me know what your restaurant's name is and if I'm in your area I will have to drop in! Steve __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

06-15-2011, 04:07 PM	#180
funkytechmonkey Registered User Join Date: Jan 2011 Location: Lawrenceville, GA Posts: 1,080	Re: Project "Jezebel" My restaurant is called Jack's New Yorker Deli I built the one in johns creek, ga. www.jacksnyd.com Back to your build....did you build the cart you are using to roll around your cab? If so, do you have the specs on it? I'd like to built something like that. Posted via Mobile Device __________________ Never wrenched a day in my life and now... Im doing a frame off restoration on a 1968 C10 with a Porterbuilt Dropmember, Acuair E-Level kit, Boyd Welds Gas tank and mild c-notch. Click here to view my build Last edited by funkytechmonkey; 06-15-2011 at 04:08 PM.

07-12-2011, 05:49 PM	#181
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Project "Jezebel" Ok guys I guess it's time for an update. Some progress is better than no progress right? I have stripped all of the paint from the outside of the cab, etch primed and shot it with 2k. More bodywork still to do and right now I have the cab back on the frame and doing some tweaks on the door fitment. Here are the pics of all that. That's 9 layers of paint! Nice clean metal underneath. You can see the 3m seam sealer in the drip rail in this pic. Bodywork, bodywork, and more bodywork... __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

07-12-2011, 05:52 PM	#182
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Project "Jezebel" Im kinda digging the drab green color. Gives me an idea for one of my other projects... Can you say, salute to the good ole, U.S.M.C... __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

07-12-2011, 05:56 PM	#183
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Project "Jezebel" That's about it for now. I will have to take some pics of the cab on the frame and also reveal the tires and wheels... Stay tuned my gear head brethren! Steve __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

07-12-2011, 05:57 PM	#184
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "Jezebel" Great progress and I like the green primer too. Posted via Mobile Device __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-01-2011, 08:30 PM	#186
chevy_man5 GMC's n H.D.'s too! Join Date: Oct 2010 Location: Nampa, Idaho Posts: 1,583	Re: Project "Jezebel" I just read through your thread. WOW!! If I run into that much rust, I will probably chicken out!! LOL You have done some amazing work! Keep it up! __________________ Jason 1960 GMC 4x4 Babe (the Blue Ox) - Build Thread

11-01-2011, 09:34 PM	#187
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "Jezebel" Any updates lately? __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

11-02-2011, 08:16 AM	#188
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Project "Jezebel" I took some time off to do some work around the house. I have recently started back working on Jezebel. I plan to start posting updates real soon. __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide! Last edited by sgaylord; 11-02-2011 at 03:52 PM.

11-02-2011, 03:33 PM	#189
oldtinrods Registered User Join Date: Nov 2011 Location: Central Indiana Posts: 39	Re: Project "Jezebel" Great work. I really like how you are smoothing everything out. Subscribing.. __________________ 1970 C10 - 350/350TH 1954 Chevy 1929 Model A Roadster http://www.oldtinrods.com

11-02-2011, 11:34 PM	#190
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 628	Re: Project "Jezebel" Holy crap SGAYLORD!! I thought I was crazy!! That's just totally sick, but your doing really great. How do I say this politely,,,, Some of you guys start with some really rusty $h1t. I can't believe your saving her. Around here we call that a poor excuse for a parts truck. I guess we're blessed to live in a low humidity area. Nice job on the truck and the camaro (totally sweet). Keep up the good work. __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

12-13-2011, 04:58 PM	#191
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Project "Jezebel" I really needed to get some updated progress pics out so you guys can see where I am so here goes. Noticed the door still stuck out more than I wanted at the rocker so I did the typical rocker slice, dice, and fill to bring it out a bit. Below you will see the tools I used to grind down the welds and smooth it out. __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

12-13-2011, 05:06 PM	#192
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Project "Jezebel" The next project was the captive nuts in the "A" pillar were getting stripped from all the removal and installation of the door during fitting. I wish I would have done this when I had the "A" pillar open but oh well. Had to cut an access into the "A" pillar pocket to access the cage that held in the captive nuts that the door hinges bolts to. You cant see it too well here but the threads were pretty worn so the only option was to weld it shut and tap it back out. Welded, drilled, and tapped for the 3/8-24 bolts. __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!



Register or Log In To remove these advertisements.

12-13-2011, 05:13 PM	#193
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Project "Jezebel" That pretty much gets you up to date to where I am at the moment. Here are some current pics with the cab on the frame. As well as pics of the wheels and tires that I just realized I did not post before. Feedback welcome! __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

12-13-2011, 05:15 PM	#194
mcbassin Still Learning Join Date: Jul 2009 Location: Central Oklahoma Posts: 10,108	Re: Project "Jezebel" Man, super attention to details! couple of questions, Where did you get your rockers? Where did you get the 3m seam sealer? do you have a part number? What kind of primer is that? Epoxy? Are you just using a D/A sander to get your paint to bare metal? sorry for the questions, I'm getting ready to do my second cab for my project. thanks __________________ Mike "69 Short Wide" My Project 86 Silverado Landen's Project Instagram: @mcbassin My Website C/10 Club Oklahoma Facebook Group

12-13-2011, 05:34 PM	#195
sgaylord Project collector Join Date: Mar 2006 Location: Sanderson, Fl Posts: 700	Re: Project "Jezebel" Hey Mike, No problem about the questions. Where did you get your rockers? They were made by Tri-plus. I think I picked them up from a vendor at the Daytona Turkey Rod Run. Where did you get the 3m seam sealer? do you have a part number? I got it at Orileys. Don't have the part # but if you cant find it send me a PM and I will ask my buddy who manages my local store for the PN. What kind of primer is that? Epoxy? Sherwin Williams Etch on bare metal and their 2k on top of that. Are you just using a D/A sander to get your paint to bare metal? Exactly, DA set to lock with 80 grit Steve __________________ 69 CST-10 SWB (disguised as a 67) 383/700r4 Jezebel Jezebel 3.0 NEW!!! 2020 GMC 3500 Denali Duramax 2016 Harley Street Glide CVO Roll Tide!

12-13-2011, 09:38 PM	#196
fakerwade Senior Member Join Date: Oct 2011 Location: Lewiston, ID. Posts: 628	Re: Project "Jezebel" Fricken awesome, thanks for the update. __________________ Wade , JUST WALK AWAY, AND I'LL SPARE YOUR LIVES!!! , Build thread "TANGERINE" http://67-72chevytrucks.com/vboard/s...d.php?t=498570 Board Members Met: bigblock68, ol_skool_chevy ,68TT,atvpro

12-13-2011, 11:45 PM	#197
mjensen Registered User Join Date: Jun 2006 Location: Utah Posts: 1,562	Re: Project "Jezebel" Yeah! Progress! Looking very nice! I love those wheels. __________________ Mike '69 GMC 3/4 ton 4x4 Build Thread

12-14-2011, 06:31 PM	#199
67cheby 67cheby Join Date: Sep 2008 Location: siloam springs ar 72761 Posts: 17,890	Re: Project "Jezebel" nice !!! i LOVE the wheels ! __________________ Check out Slosh Tubz, bolt-in inner fenders for frame laying C-10's Slosh Tubz Introductory Price $559 67 Cheby's Dropmember Build Thread Slosh Tubz on Facebook http://67-72chevytrucks.com/vboard/s...d.php?t=554172

12-14-2011, 09:39 PM	#200
Jarwood Registered User Join Date: Oct 2011 Location: Jefferson, Georgia Posts: 248	Re: Project "Jezebel" Awesome work and detail. I can only hope to be that good one day!

Register or Log In To remove these advertisements.