OR 1972 C10 Parting

[NovaBrad]

Im actually going to pass for right now.
thanks for the reply.

Originally Posted by DLTruck1973

I am not sure about the ones from this truck. I believe they were in poor condition. I do have others here that are nicer.

What is your engine trans combo? 350/auto? 6 cyl/4speed?

Let me know what you have and I will look and post photos of what I have.

Thank you,
Thomas

[72lady]

Is the radio power wire still available? Thanks!

[lyrikz]

Originally Posted by DLTruck1973

I will put your name on them T.

See you soon. Safe travels,
Thomas

Do you still have the Front crossmember and all the goodies for the front end?
How far are you from seatlle washington?

[DLTruck1973]

Originally Posted by 72lady

Is the radio power wire still available? Thanks!

I have plenty.

They are $10.00 shipped to your door as long as you are in the US.

Let me know,
Thomas

[DLTruck1973]

Originally Posted by lyrikz

Do you still have the Front crossmember and all the goodies for the front end?
How far are you from seatlle washington?

Not from this truck but I have another truck I can pull it from and have it ready tomorrow. I get $250.00 for these minus steering gear and minus front stabilizer bar.

I would need full payment to pull it and cover paypal fees which would be $7.50 so $257.50 total.

We are about 5 - 5.5 hrs from Seattle on Hwy 99S just a couple of miles north of Eugine airport. We are open until 5 pm Mon - Fri

91720 Hwy 99 S
Junction City, OR 97448

Let me know,

Thank you,
Thomas

[hdff]

how about the plug/connector and wires that go to the ac compressor. looks like a flat style connector...

[Cam1968rsss]

Hi Thomas, hadn't looked at all of the postings so I'll take a chance and see if you still have:

Under dash harness
Engine harness
Front light harness
Both hood hinges
Wiper Motor
Both door vent windows

Let me know
Thanks
Eddie

[Cam1968rsss]

Thomas, if you don't have those harnesses and have something else that might work I have a 1972 350/350 combo with gauges.

Thanks
Eddie

[DLTruck1973]

Originally Posted by hdff

how about the plug/connector and wires that go to the ac compressor. looks like a flat style connector...

I will have to check for you. Not a lot of AC trucks here.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by Cam1968rsss

Hi Thomas, hadn't looked at all of the postings so I'll take a chance and see if you still have:

Under dash harness
Engine harness
Front light harness
Both hood hinges
Wiper Motor
Both door vent windows

Let me know
Thanks
Eddie

Let me check and see what I have for you. Do you want clear or tinted glass on the vent windows?

I do not have any engine harnesses that are un cut. They will need repair on the yellow coil wire and possibly the starter end of the purple wire. If you are running an HEI, the yellow wire will not be used anyway.

Are all of these parts you need for a 72 or different year?

Let me know and I will work on the list for you.

Thank you,
Thomas

[Cam1968rsss]

For 1972, 350 engine 350 trans.

Thanks
Eddie

[Cam1968rsss]

Clear glass on vent windows

[DLTruck1973]

Originally Posted by Cam1968rsss

Hi Thomas, hadn't looked at all of the postings so I'll take a chance and see if you still have:

Under dash harness
Engine harness
Front light harness
Both hood hinges
Wiper Motor
Both door vent windows

Let me know
Thanks
Eddie

Here you go,

Under dash harness $65.00 for a nice uncut/unspliced one for gauges
Engine harness $40.00 for one that needs yellow wire repair
Front light harness $60.00 for a nice uncut / unsliced one with tunnel. Will need re taped
Both hood hinges $75.00 for a decent set that will have very little play.
Wiper Motor $25.00 I have many of these. will test for function.
Both door vent windows $125.00 for a nice driver set with good chrome and clear glass. Overall real nice.


None of these parts are perfect but very nice used parts.

Let me know if interested and your zip code and I can gather everything up for a ship quote.

Thank you,
Thomas

[corey72]

I am looking for a rear license plate bracket and rear bumper brackets for a
1970 C10 long bed with coil springs.

[DLTruck1973]

Originally Posted by corey72

I am looking for a rear license plate bracket and rear bumper brackets for a
1970 C10 long bed with coil springs.

Let me look in the inventory and see what I may have. I will get back with you if I have something. For a sport bumper correct?

Thank you,
Thomas

[corey72]

yes it's a sport bumper

[dec010974]

hey DLTruck1973. have you sold the second batch of Clutch pedal linkage parts. I scanned the thread but I don't know if it was sold. my zip is 33176. I can paypal ASAP.

[vics stuff]

Looking at your front sway bar assy. What are you looking to get out of that $$$ ?
Vic

[vics stuff]

Interested in the front sway bar assy. How much are you looking to get out of it $$$.
Thanks Vic

[56 chevy]

was wanting to know if the under truck spare tire carrier and cargo light is still available or not is so how mush shipped to 23325 and any close up picture of cargo light

[hdff]

Originally Posted by hdff

how about the plug/connector and wires that go to the ac compressor. looks like a flat style connector...

Originally Posted by DLTruck1973

I will have to check for you. Not a lot of AC trucks here.

Thank you,
Thomas

ok ,,that's good for y'all, not hot, but could be bad for me.....

[DLTruck1973]

Originally Posted by corey72

yes it's a sport bumper

Without the light housing = $40.00

With the light housing and lens = $52.50

$5.00 additional with mounting bolts.

All plus shipping.

I have nothing for bumper brackets.

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by hdff

ok ,,that's good for y'all, not hot, but could be bad for me.....

Sorry I have nothing for you. I am sure the owners of these trucks here wish they had AC as it has been over 95 here for the last month or so. Not Texas hot but still hot.

Thank you for the interest,
Thomas

[DLTruck1973]

Originally Posted by dec010974

hey DLTruck1973. have you sold the second batch of Clutch pedal linkage parts. I scanned the thread but I don't know if it was sold. my zip is 33176. I can paypal ASAP.

The one from this thread is sold but I should be able to get another one put together for you. Is it for a small block 2wd truck 69-72?

$75.00 for everything from the clutch pedal to the throw out fork including the frame bracket and return spring.

Let me know and I will figure out shipping for you.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by vics stuff

Interested in the front sway bar assy. How much are you looking to get out of it $$$.
Thanks Vic

Hi Vic,

Yes on the sway bar complete with frame brackets $65.00 plus shipping.

Let me know,

Thank you for the interest,
Thomas