Senior Project Build - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCIV · 12-31-2008, 12:03 PM

Great looking project! Of course I kept the FI for the ease of computer tuning with the turbos when they come around.

But the plumbing system and pump isn't cheap by any means!

Do the carb, I think if you know how to tune them, they can make plenty of power.

What cam specs you looking at? Those L92 heads can flow something rediculous!

Good luck!

LuckyHenriksen · 12-31-2008, 01:38 PM

I don't know about the cam, have any good ideas? I am planning to call COMp, tell them my specs and see if they have a grind of the shelf or maybe get a custom one made. I am looking for the most radical I can run on the street, even if I have to shift into neutral at stop lights =]

SCIV · 12-31-2008, 01:57 PM

Quote:

Originally Posted by LuckyHenriksen

I don't know about the cam, have any good ideas? I am planning to call COMp, tell them my specs and see if they have a grind of the shelf or maybe get a custom one made. I am looking for the most radical I can run on the street, even if I have to shift into neutral at stop lights =]

Let me do some research. There are plenty of nasty combos out there, you just will have to run a nice size stall.

LuckyHenriksen · 12-31-2008, 02:39 PM

Thanks man, high stall is my friend

LuckyHenriksen · 12-31-2008, 05:47 PM

Christmas Present! From my step dad =]
I needed a new one after a got mad and scraped the old one

LuckyHenriksen · 12-31-2008, 09:43 PM

The Billet Holley HP fuel pump and regulator came in today. It is a nice looking piece! Very solid and heavy.

And I picked up the ET Streets! Massive for sure. They are so cool. I will get them mounted on the Halibrands as soon as Les Schwab opens.

VA72C10 · 12-31-2008, 10:21 PM

Sweet meat

SCIV · 12-31-2008, 10:34 PM

Oh yeah baby!

thirdstreettito · 12-31-2008, 10:48 PM

Sweet! Are you putting those on the new wheels? I know they are ET Streets, but are they street legal?

LuckyHenriksen · 12-31-2008, 11:11 PM

Yep! Those little grooves makes them legal

Yep they are going on the Halibrand wheels. I will get them mounted as soon as schwabs is open. I hope these fit in the wheels wells.....

Gray Ghost · 01-01-2009, 11:58 AM

Sweet...I see Santa Claus is making several stops at your house!

I just ordered that book from Amazon. I want to get familiar as I can with the motor before diving in to the swap.

LuckyHenriksen · 01-01-2009, 01:09 PM

It is a great book, full o color photos and lots of tips. Way better than some some of my SBC books

texanidiot25 · 01-01-2009, 02:45 PM

Quote:

Originally Posted by LuckyHenriksen

Yep! Those little grooves makes them legal

Just wait for the rain.

LuckyHenriksen · 01-01-2009, 05:56 PM

What do you mean "wait" for the rain? Its pouring here lol. By the time I get the new motor combo installed it will be dry here in Oregon =]

I threw it on the QuickCar scales today, was pleasantly surprised at the weight. 3676 lbs. with no driver, 3862 with my friend sitting in the drivers seat.

LuckyHenriksen · 01-01-2009, 07:08 PM

I got a cool free shirt with my fuel pump!! Too bad its XL

Test Fit! Why cant the tire store be open on New Years day??? lol

SCIV · 01-01-2009, 07:46 PM

Those wheels look killer!

You can send that t-shirt my way, XL is a perfect fit!

LuckyHenriksen · 01-01-2009, 09:35 PM

Auburn Mini-Spool! Now I have to figure out how to install it

rckclmbr99 · 01-01-2009, 09:47 PM

man those wheels and tires are sweet and I'm jealous of the mini spool. Lookin real good man. keep it up.
Take it easy,
Jonathan

rckclmbr99 · 01-01-2009, 09:48 PM

man those wheels and tires are sweet and I'm jealous of the mini spool. Lookin real good man. keep it up.
Take it easy,
Jonathan

lts70 · 01-02-2009, 01:42 PM

I got here before the wheel pictures did

I will be right here waiting impatiently for the new pictures.

LuckyHenriksen · 01-02-2009, 01:58 PM

They are uploading right now! Man I can't wait to get the new motor built, I want to see these things spin!

lts70 · 01-02-2009, 02:07 PM

What motor are you pluging in? After looking at your picture from the other post I think I like the center caps that came with our rims more than I though I would. If I find some cheap used american racing caps I will change them over but not for $120. STill waiting.......

LuckyHenriksen · 01-02-2009, 02:19 PM

Ya I couldn't justify spending that much just for caps. These ones look good IMO. I am planning a built 6.0 Gen III with L92 heads and a carb. My goal is 550 HP to the crank.

Oh and my old set of ralleys and tires weighed in at 197 lbs. total, the new set of wheels and tires weighs in at 169 lbs. so I get to save weight at the same time

lts70 · 01-02-2009, 02:24 PM

I plan on doing the 6.0l myself but with fuel injection and not quite as much HP. I will be following your build on that one. Cut 30lbs. of fat, not bad!

LuckyHenriksen · 01-02-2009, 02:26 PM

Ya i was exited, any bit of weight you can cut from these beasts is helpful. pics are almost done loading to photobucket

12-31-2008, 12:03 PM	#176
SCIV Registered User Join Date: Sep 2008 Location: Georgetown, Texas Posts: 170	Re: Senior Project Build Great looking project! Of course I kept the FI for the ease of computer tuning with the turbos when they come around. But the plumbing system and pump isn't cheap by any means! Do the carb, I think if you know how to tune them, they can make plenty of power. What cam specs you looking at? Those L92 heads can flow something rediculous! Good luck! __________________ '68 Chevrolet Short Step 6.0 L + 91mm + TH400 + 9" + 4-Link

12-31-2008, 01:38 PM	#177
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Senior Project Build I don't know about the cam, have any good ideas? I am planning to call COMp, tell them my specs and see if they have a grind of the shelf or maybe get a custom one made. I am looking for the most radical I can run on the street, even if I have to shift into neutral at stop lights =] __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-31-2008, 02:39 PM	#179
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Senior Project Build Thanks man, high stall is my friend __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-31-2008, 05:47 PM	#180
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Senior Project Build Christmas Present! From my step dad =] I needed a new one after a got mad and scraped the old one __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-31-2008, 09:43 PM	#181
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Senior Project Build The Billet Holley HP fuel pump and regulator came in today. It is a nice looking piece! Very solid and heavy. And I picked up the ET Streets! Massive for sure. They are so cool. I will get them mounted on the Halibrands as soon as Les Schwab opens. __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

12-31-2008, 10:21 PM	#182
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Senior Project Build Sweet meat __________________ Looking for a 67-72 swb or blazer project in or around VA.

12-31-2008, 10:34 PM	#183
SCIV Registered User Join Date: Sep 2008 Location: Georgetown, Texas Posts: 170	Re: Senior Project Build Oh yeah baby! __________________ '68 Chevrolet Short Step 6.0 L + 91mm + TH400 + 9" + 4-Link

12-31-2008, 10:48 PM	#184
thirdstreettito Resident of Here Join Date: May 2008 Location: Wesley Chapel, FL, USA Posts: 7,716	Re: Senior Project Build Sweet! Are you putting those on the new wheels? I know they are ET Streets, but are they street legal? __________________ ~Bradley~ 2004 Black GTO LS2/T56 too much to list Miss having a truck

12-31-2008, 11:11 PM	#185
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Senior Project Build Yep! Those little grooves makes them legal Yep they are going on the Halibrand wheels. I will get them mounted as soon as schwabs is open. I hope these fit in the wheels wells..... __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

01-01-2009, 11:58 AM	#186
Gray Ghost Senior Member Join Date: Sep 2004 Location: Terrell, TX Posts: 1,967	Re: Senior Project Build Sweet...I see Santa Claus is making several stops at your house! I just ordered that book from Amazon. I want to get familiar as I can with the motor before diving in to the swap. __________________ Kelly '05 GMC Sierra SLE Z71 Bone stock except for new bed rail caps.

01-01-2009, 01:09 PM	#187
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Senior Project Build It is a great book, full o color photos and lots of tips. Way better than some some of my SBC books __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

01-01-2009, 05:56 PM	#189
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Senior Project Build What do you mean "wait" for the rain? Its pouring here lol. By the time I get the new motor combo installed it will be dry here in Oregon =] I threw it on the QuickCar scales today, was pleasantly surprised at the weight. 3676 lbs. with no driver, 3862 with my friend sitting in the drivers seat. __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

01-01-2009, 07:08 PM	#190
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Senior Project Build I got a cool free shirt with my fuel pump!! Too bad its XL Test Fit! Why cant the tire store be open on New Years day??? lol __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

01-01-2009, 07:46 PM	#191
SCIV Registered User Join Date: Sep 2008 Location: Georgetown, Texas Posts: 170	Re: Senior Project Build Those wheels look killer! You can send that t-shirt my way, XL is a perfect fit! __________________ '68 Chevrolet Short Step 6.0 L + 91mm + TH400 + 9" + 4-Link

01-01-2009, 09:35 PM	#192
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Senior Project Build Auburn Mini-Spool! Now I have to figure out how to install it __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here



Register or Log In To remove these advertisements.

01-01-2009, 09:47 PM	#193
rckclmbr99 Registered User Join Date: Dec 2008 Location: Cumming, GA Posts: 94	Re: Senior Project Build man those wheels and tires are sweet and I'm jealous of the mini spool. Lookin real good man. keep it up. Take it easy, Jonathan __________________ 18 and workin' on the first build ('69 C10) 2002 Chevy Silverado REG cab, Short bed, 5.3 V8: Murdered. Club: B-Low Average keepin' it real and low

01-01-2009, 09:48 PM	#194
rckclmbr99 Registered User Join Date: Dec 2008 Location: Cumming, GA Posts: 94	Re: Senior Project Build man those wheels and tires are sweet and I'm jealous of the mini spool. Lookin real good man. keep it up. Take it easy, Jonathan __________________ 18 and workin' on the first build ('69 C10) 2002 Chevy Silverado REG cab, Short bed, 5.3 V8: Murdered. Club: B-Low Average keepin' it real and low

01-02-2009, 01:42 PM	#195
lts70 1970 Daily Driver Join Date: Jun 2007 Location: Glenns Ferry IDAHO Posts: 1,035	Re: Senior Project Build I got here before the wheel pictures did I will be right here waiting impatiently for the new pictures. __________________ It's not truly yours if you didn't build it yourself or if you don't do your own maintenance.

01-02-2009, 01:58 PM	#196
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Senior Project Build They are uploading right now! Man I can't wait to get the new motor built, I want to see these things spin! __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

01-02-2009, 02:07 PM	#197
lts70 1970 Daily Driver Join Date: Jun 2007 Location: Glenns Ferry IDAHO Posts: 1,035	Re: Senior Project Build What motor are you pluging in? After looking at your picture from the other post I think I like the center caps that came with our rims more than I though I would. If I find some cheap used american racing caps I will change them over but not for $120. STill waiting....... __________________ It's not truly yours if you didn't build it yourself or if you don't do your own maintenance.

01-02-2009, 02:19 PM	#198
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Senior Project Build Ya I couldn't justify spending that much just for caps. These ones look good IMO. I am planning a built 6.0 Gen III with L92 heads and a carb. My goal is 550 HP to the crank. Oh and my old set of ralleys and tires weighed in at 197 lbs. total, the new set of wheels and tires weighs in at 169 lbs. so I get to save weight at the same time __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

01-02-2009, 02:24 PM	#199
lts70 1970 Daily Driver Join Date: Jun 2007 Location: Glenns Ferry IDAHO Posts: 1,035	Re: Senior Project Build I plan on doing the 6.0l myself but with fuel injection and not quite as much HP. I will be following your build on that one. Cut 30lbs. of fat, not bad! __________________ It's not truly yours if you didn't build it yourself or if you don't do your own maintenance.

01-02-2009, 02:26 PM	#200
LuckyHenriksen Registered User Join Date: Oct 2007 Location: Sherwood Oregon Posts: 1,908	Re: Senior Project Build Ya i was exited, any bit of weight you can cut from these beasts is helpful. pics are almost done loading to photobucket __________________ 1968 Yenko Chevy LWB 6.0L/TH400 3/4 Drop Senior Project Build Thread Here

Register or Log In To remove these advertisements.