VA Made a list of all the parts i have for sale--- 100's of them - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

truck-collector · 05-11-2010, 05:44 PM

It really doesnt matter to me (about the woodgrain or black. Im looking for the trim lower trim that goes around the wheel wells. I also need the trim that goes around the cab (upper trim maybe?). How about some stock (non rally) 6 lug wheels?

VA72C10 · 05-11-2010, 08:12 PM

so you're looking for 67-68 specific that goes over the wheel wells...not the straight line? And I have a couple decent sets of the paint separator moldings that goes around the cab. No 6 lug steel...I do have 6 lug rally wheels 15X8.

truck-collector · 05-11-2010, 08:46 PM

Yeah the 67-68 set that goes over the wheels and down the side. The trim on my truck is gone but the trim mounts are still there. I can see on the paint where the trim used to be and I measured that-the trim down the side was about 2.25" wide and then narrowed around the wheels. Did the wheel trim screw on underneath the wheel well? How much for the paint separators?

VA72C10 · 05-11-2010, 08:59 PM

I don't have any of the 67-68...just the wider lower trim

for the paint separator...30.00 for a set. you'll need the mounting pieces though.

**JMac11** · 05-11-2010, 09:49 PM

V8 AC Guages harness? Black 72 Arm Rest?

VA72C10 · 05-13-2010, 09:09 AM

I have a harness for a V8 w/ A/C. 125 shipped. Sorry, no armrest.

crazyjim68 · 05-13-2010, 11:44 AM

Pict. of the red steering column

VA72C10 · 05-13-2010, 10:29 PM

Quote:

Originally Posted by crazyjim68

Pict. of the red steering column

I'll get them tomorrow night. Thanks.

bddcustoms · 05-13-2010, 11:34 PM

do you still have the radiator core support? what's the rust situation on the passenger side of the support (under the battery mount spot)? how much?

thanks

DTT

VA72C10 · 05-13-2010, 11:37 PM

which year? 69? I have a perfect 69-72 original, a really nice one with just light pitting but still solid... and a repop new in the box. I also have a 67-68 and a 72 gmc...both of those need work.

**JMac11** · 05-14-2010, 01:49 PM

Definately a go on the harness, gimme a day to make sure I don't need something else on your list.

VA72C10 · 05-14-2010, 02:19 PM

sounds good. just let me know.

bddcustoms · 05-14-2010, 10:36 PM

"I have a perfect 69-72 original, a really nice one with just light pitting but still solid..." how much?

*ksjh1316* · 05-14-2010, 11:14 PM

Looks like I am going to need a harness after all let me know v-8 engine harness running vintage air and gages and it is a swb GMC. Let me know shipping to 67218. Thanks for the help sorry it took so long to get back to ya

bddcustoms · 05-14-2010, 11:27 PM

Also, would you have an A/T crossmember for '69?

VA72C10 · 05-14-2010, 11:56 PM

Quote:

Originally Posted by bddcustoms

"I have a perfect 69-72 original, a really nice one with just light pitting but still solid..." how much?

225 for the perfect original
180 for the really nice one with light pitting

Quote:

Originally Posted by bddcustoms

Also, would you have an A/T crossmember for '69?

yes, 50.00

Quote:

Originally Posted by ksjh1316

Looks like I am going to need a harness after all let me know v-8 engine harness running vintage air and gages and it is a swb GMC. Let me know shipping to 67218. Thanks for the help sorry it took so long to get back to ya

just the engine harness section or the entire under dash harness with the fuse block?

*ksjh1316* · 05-14-2010, 11:59 PM

I am going to need it all my wifes grandfather hacked it up worse than I remember every section was cut or spliced more than twice

ajgriffin · 05-15-2010, 02:12 AM

Did you ever get rid of the 67/68 hood & grill? I'm interested if you haven't yet.

VA72C10 · 05-15-2010, 09:44 AM

grille sold, hood is too big to ship. sorry

VA72C10 · 05-15-2010, 09:45 AM

Quote:

Originally Posted by ksjh1316

I am going to need it all my wifes grandfather hacked it up worse than I remember every section was cut or spliced more than twice

I have the complete harness out of a 71chevy swb. 125 shipped.

Jobe72 · 05-15-2010, 12:18 PM

I'm loooking for a few trim peices for a LWB

Need lower woodgrain passenger side back bedside, and driver side front bedside.
Also looking for a passenger side sport mirror and turn signal knob.

thanks!

VA72C10 · 05-15-2010, 10:38 PM

I'll go through my trim and see if I have those in woodgrain. I don't have a sport mirror,....I think I have an extra turn signal knob.

*ksjh1316* · 05-15-2010, 11:33 PM

send me your paypal info and I will get you paid ASAP

VA72C10 · 05-15-2010, 11:46 PM

pm sent

hwes55 · 05-15-2010, 11:59 PM

Im interested in your floor shift column if you still have it. Whens a good time to come get it?

05-11-2010, 05:44 PM	#176
truck-collector Registered User Join Date: May 2010 Location: Beaverton, MI Posts: 14	Re: Made a list of all the parts i have for sale--- 100's of them It really doesnt matter to me (about the woodgrain or black. Im looking for the trim lower trim that goes around the wheel wells. I also need the trim that goes around the cab (upper trim maybe?). How about some stock (non rally) 6 lug wheels?

05-11-2010, 08:12 PM	#177
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them so you're looking for 67-68 specific that goes over the wheel wells...not the straight line? And I have a couple decent sets of the paint separator moldings that goes around the cab. No 6 lug steel...I do have 6 lug rally wheels 15X8. __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-11-2010, 08:46 PM	#178
truck-collector Registered User Join Date: May 2010 Location: Beaverton, MI Posts: 14	Re: Made a list of all the parts i have for sale--- 100's of them Yeah the 67-68 set that goes over the wheels and down the side. The trim on my truck is gone but the trim mounts are still there. I can see on the paint where the trim used to be and I measured that-the trim down the side was about 2.25" wide and then narrowed around the wheels. Did the wheel trim screw on underneath the wheel well? How much for the paint separators?

05-11-2010, 08:59 PM	#179
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them I don't have any of the 67-68...just the wider lower trim for the paint separator...30.00 for a set. you'll need the mounting pieces though. __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-11-2010, 09:49 PM	#180
JMac11 Registered User Join Date: May 2005 Location: Tallahassee Fl Posts: 773	Re: Made a list of all the parts i have for sale--- 100's of them V8 AC Guages harness? Black 72 Arm Rest?

05-13-2010, 09:09 AM	#181
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them I have a harness for a V8 w/ A/C. 125 shipped. Sorry, no armrest. __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-13-2010, 11:44 AM	#182
crazyjim68 Registered User Join Date: Mar 2005 Location: Las Vegas NV. Posts: 7	Re: Made a list of all the parts i have for sale--- 100's of them Pict. of the red steering column

05-13-2010, 11:34 PM	#184
bddcustoms Registered User Join Date: Apr 2009 Location: Bowie, Maryland Posts: 80	Re: Made a list of all the parts i have for sale--- 100's of them do you still have the radiator core support? what's the rust situation on the passenger side of the support (under the battery mount spot)? how much? thanks DTT __________________ broke d!@k dog Garage 1969 C20 - Project: "Big Sexy" [http://67-72chevytrucks.com/vboard/s...d.php?t=454894] 2003 'Burban - [Big Pop's daily driver] 1969 350/350 Stingray - [as soon as the economy turns...] 1939 Chevy Roadster Pick Up - Project: "Pre-School" (searching now)

05-13-2010, 11:37 PM	#185
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them which year? 69? I have a perfect 69-72 original, a really nice one with just light pitting but still solid... and a repop new in the box. I also have a 67-68 and a 72 gmc...both of those need work. __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-14-2010, 01:49 PM	#186
JMac11 Registered User Join Date: May 2005 Location: Tallahassee Fl Posts: 773	Re: Made a list of all the parts i have for sale--- 100's of them Definately a go on the harness, gimme a day to make sure I don't need something else on your list.

05-14-2010, 02:19 PM	#187
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them sounds good. just let me know. __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-14-2010, 10:36 PM	#188
bddcustoms Registered User Join Date: Apr 2009 Location: Bowie, Maryland Posts: 80	Re: Made a list of all the parts i have for sale--- 100's of them "I have a perfect 69-72 original, a really nice one with just light pitting but still solid..." how much? __________________ broke d!@k dog Garage 1969 C20 - Project: "Big Sexy" [http://67-72chevytrucks.com/vboard/s...d.php?t=454894] 2003 'Burban - [Big Pop's daily driver] 1969 350/350 Stingray - [as soon as the economy turns...] 1939 Chevy Roadster Pick Up - Project: "Pre-School" (searching now)

05-14-2010, 11:14 PM	#189
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Made a list of all the parts i have for sale--- 100's of them Looks like I am going to need a harness after all let me know v-8 engine harness running vintage air and gages and it is a swb GMC. Let me know shipping to 67218. Thanks for the help sorry it took so long to get back to ya

05-14-2010, 11:27 PM	#190
bddcustoms Registered User Join Date: Apr 2009 Location: Bowie, Maryland Posts: 80	Re: Made a list of all the parts i have for sale--- 100's of them Also, would you have an A/T crossmember for '69? __________________ broke d!@k dog Garage 1969 C20 - Project: "Big Sexy" [http://67-72chevytrucks.com/vboard/s...d.php?t=454894] 2003 'Burban - [Big Pop's daily driver] 1969 350/350 Stingray - [as soon as the economy turns...] 1939 Chevy Roadster Pick Up - Project: "Pre-School" (searching now)

05-14-2010, 11:59 PM	#192
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Made a list of all the parts i have for sale--- 100's of them I am going to need it all my wifes grandfather hacked it up worse than I remember every section was cut or spliced more than twice



Register or Log In To remove these advertisements.

05-15-2010, 02:12 AM	#193
ajgriffin Registered User Join Date: Feb 2008 Location: Carson, CA Posts: 581	Re: Made a list of all the parts i have for sale--- 100's of them Did you ever get rid of the 67/68 hood & grill? I'm interested if you haven't yet. __________________ 69 C10 SWB -- Left to me by a loving father. Finishing the build we never got the chance to do together

05-15-2010, 09:44 AM	#194
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them grille sold, hood is too big to ship. sorry __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-15-2010, 12:18 PM	#196
Jobe72 Registered User Join Date: Mar 2010 Location: Austin, TX Posts: 299	Re: Made a list of all the parts i have for sale--- 100's of them I'm loooking for a few trim peices for a LWB Need lower woodgrain passenger side back bedside, and driver side front bedside. Also looking for a passenger side sport mirror and turn signal knob. thanks! __________________ 1972 GMC Sierra LWB (Aquafresh) 1962 Cadillac Convertible 1962 Cadillac Sedan project

05-15-2010, 10:38 PM	#197
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them I'll go through my trim and see if I have those in woodgrain. I don't have a sport mirror,....I think I have an extra turn signal knob. __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-15-2010, 11:33 PM	#198
ksjh1316 Account Suspended Join Date: Jul 2007 Location: Wichita KS Posts: 1,599	Re: Made a list of all the parts i have for sale--- 100's of them send me your paypal info and I will get you paid ASAP

05-15-2010, 11:46 PM	#199
VA72C10 VA72C10 Join Date: Mar 2008 Location: Midlothian, VA Posts: 25,269	Re: Made a list of all the parts i have for sale--- 100's of them pm sent __________________ Looking for a 67-72 swb or blazer project in or around VA.

05-15-2010, 11:59 PM	#200
hwes55 Say hello to my little friend! Join Date: Apr 2010 Location: New Hill, NC Posts: 30	Re: Made a list of all the parts i have for sale--- 100's of them Im interested in your floor shift column if you still have it. Whens a good time to come get it?

Register or Log In To remove these advertisements.