67CST rebuild down under - Page 8 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

aussie67c10 · 09-30-2012, 02:46 AM

I pushed it out the front , its off to the trimmers on tues to get custom carpet

aussie67c10 · 09-30-2012, 04:21 AM

here is one more

Helpa · 09-30-2012, 05:00 AM

Wow lots of hard work put in. I am buying this c10

I know absolutely nothing about mech/paint/panel. I do have 8 years experience with windscreens/body glass. Hoping to get as much help and advice as I can!
-Mark

aussie67c10 · 09-30-2012, 05:08 AM

Quote:

Originally Posted by Helpa

Wow lots of hard work put in. I am buying this c10

I know absolutely nothing about mech/paint/panel. I do have 8 years experience with windscreens/body glass. Hoping to get as much help and advice as I can!
-Mark

Hey mate if there is any thing i can help you with . just let me know. your truck looks good too

Helpa · 09-30-2012, 06:59 AM

Hey this truck is looking grea, how long have you been building it for?

Helpa · 09-30-2012, 07:01 AM

Thanks mate will keep you updated once I get the truck. The bloke I am buying it from seems pretty genuine and said he doesn;t mind me paying it off over a couple months. Just gotta get it up on hoist to check it over properley but so far it seems like a winner!

aussie67c10 · 09-30-2012, 07:11 AM

Quote:

Originally Posted by Helpa

Hey this truck is looking grea, how long have you been building it for?

I bought the truck in 2007 , got it painted in 2009 , fell on hard times so put it away , pulled it out at the start of the year and started to put it back together .most of the parts i had in storage so the cash pain has not been that bad

aussie67c10 · 10-01-2012, 01:10 AM

Just bolted on the front bumper

Helpa · 10-01-2012, 07:26 AM

Tough as!

aussie67c10 · 10-01-2012, 07:30 AM

Quote:

Originally Posted by Helpa

Tough as!

Thanks bud

aussie67c10 · 10-04-2012, 10:07 AM

My intake manifold rocked up today

aussie67c10 · 10-13-2012, 09:43 AM

Me at work doing it ezy

aussie67c10 · 10-16-2012, 03:15 AM

the bottom wishbone bump rubbers rolled up today

aussie67c10 · 10-16-2012, 03:22 AM

and my steering column parts rolled up as well

aussie67c10 · 10-19-2012, 09:17 AM

my new carby rolled up today . its a 750 hp ultra

Slick67 · 10-19-2012, 10:36 AM

This thing is gonna be a rocket!!!!! Got some great parts lined up! The manifold looks sick in black, it will really look awesome with the black paint.

aussie67c10 · 10-19-2012, 03:33 PM

here is my new block its a 69 396 4 bolt

aussie67c10 · 10-19-2012, 03:43 PM

and my new crank and rods are on there way over

aussie67c10 · 10-19-2012, 03:51 PM

Quote:

Originally Posted by Slick67

This thing is gonna be a rocket!!!!! Got some great parts lined up! The manifold looks sick in black, it will really look awesome with the black paint.

thanks dave , if i can get around 480 hp out of the motor i will be happy

Russ.W. · 10-20-2012, 08:00 PM

Nice build mate. Coming along great.

Impatiently waiting for my '67 C10 to arrive from the US.

aussie67c10 · 10-21-2012, 05:58 AM

Quote:

Originally Posted by Russ.W.

Nice build mate. Coming along great.

Impatiently waiting for my '67 C10 to arrive from the US.

Thanks bud

aussie67c10 · 10-24-2012, 06:34 AM

my rack and pinion rolled up today , i only have 6 more days of work left before i fly home and do some more work on the truck

aussie67c10 · 11-04-2012, 05:52 AM

i fitted the new rack today , all i have to do is fit up motor and trans to put some weight in the truck so i can wheel align it and check for bump steer . if the rack is in the right position i can get the bracket fully welded if not i will make the appropriate adjustments then fully weld it and paint it

Thumpt · 12-02-2012, 02:00 AM

Coming along nicely mate. You got any more info on your engine build.

chewychevy67 · 12-13-2012, 11:32 PM

That is a nice truck. Love the white 67 roofline. Subscribed!
Posted via Mobile Device

09-30-2012, 02:46 AM	#176
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under I pushed it out the front , its off to the trimmers on tues to get custom carpet Attached Images __________________ BOWTIE OR NO-TIE

09-30-2012, 04:21 AM	#177
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under here is one more Attached Images __________________ BOWTIE OR NO-TIE

09-30-2012, 05:00 AM	#178
Helpa Registered User Join Date: Sep 2012 Location: Skye,Vicoria Posts: 14	Re: 67CST rebuild down under Wow lots of hard work put in. I am buying this c10 I know absolutely nothing about mech/paint/panel. I do have 8 years experience with windscreens/body glass. Hoping to get as much help and advice as I can! -Mark

09-30-2012, 06:59 AM	#180
Helpa Registered User Join Date: Sep 2012 Location: Skye,Vicoria Posts: 14	Re: 67CST rebuild down under Hey this truck is looking grea, how long have you been building it for?

09-30-2012, 07:01 AM	#181
Helpa Registered User Join Date: Sep 2012 Location: Skye,Vicoria Posts: 14	Re: 67CST rebuild down under Thanks mate will keep you updated once I get the truck. The bloke I am buying it from seems pretty genuine and said he doesn;t mind me paying it off over a couple months. Just gotta get it up on hoist to check it over properley but so far it seems like a winner!

10-01-2012, 01:10 AM	#183
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under Just bolted on the front bumper Attached Images __________________ BOWTIE OR NO-TIE

10-01-2012, 07:26 AM	#184
Helpa Registered User Join Date: Sep 2012 Location: Skye,Vicoria Posts: 14	Re: 67CST rebuild down under Tough as!

10-04-2012, 10:07 AM	#186
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under My intake manifold rocked up today Attached Images __________________ BOWTIE OR NO-TIE

10-13-2012, 09:43 AM	#187
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under Me at work doing it ezy Attached Images __________________ BOWTIE OR NO-TIE

10-16-2012, 03:15 AM	#188
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under the bottom wishbone bump rubbers rolled up today Attached Images __________________ BOWTIE OR NO-TIE

10-16-2012, 03:22 AM	#189
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under and my steering column parts rolled up as well Attached Images __________________ BOWTIE OR NO-TIE

10-19-2012, 09:17 AM	#190
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under my new carby rolled up today . its a 750 hp ultra Attached Images __________________ BOWTIE OR NO-TIE

10-19-2012, 10:36 AM	#191
Slick67 Sofa King Crazy!! Join Date: Oct 2008 Location: Houston, TX Posts: 3,090	Re: 67CST rebuild down under This thing is gonna be a rocket!!!!! Got some great parts lined up! The manifold looks sick in black, it will really look awesome with the black paint. __________________ You found the Tater. *My Blazer Build (New)* - http://67-72chevytrucks.com/vboard/s...d.php?t=654650 *My 67 Build* - http://67-72chevytrucks.com/vboard/s...d.php?t=335650 67 Chevy LWB big window a/c AKA TOTALLED BY A JACKASS. 1972 2wd Blazer "Porterbuilt and Sloshed"

10-19-2012, 03:33 PM	#192
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under here is my new block its a 69 396 4 bolt Attached Images __________________ BOWTIE OR NO-TIE

10-19-2012, 03:43 PM	#193
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under and my new crank and rods are on there way over Attached Images __________________ BOWTIE OR NO-TIE



Register or Log In To remove these advertisements.

10-20-2012, 08:00 PM	#195
Russ.W. Registered User Join Date: Aug 2009 Location: Australia Posts: 275	Re: 67CST rebuild down under Nice build mate. Coming along great. Impatiently waiting for my '67 C10 to arrive from the US. __________________ *Show Me How To Live* *"Wrongside"* My factory right-hand drive '67 C10 build

10-24-2012, 06:34 AM	#197
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under my rack and pinion rolled up today , i only have 6 more days of work left before i fly home and do some more work on the truck Attached Images __________________ BOWTIE OR NO-TIE

11-04-2012, 05:52 AM	#198
aussie67c10 Registered User Join Date: Dec 2011 Location: Adelaide South australia Posts: 249	Re: 67CST rebuild down under i fitted the new rack today , all i have to do is fit up motor and trans to put some weight in the truck so i can wheel align it and check for bump steer . if the rack is in the right position i can get the bracket fully welded if not i will make the appropriate adjustments then fully weld it and paint it Attached Images __________________ BOWTIE OR NO-TIE

12-02-2012, 02:00 AM	#199
Thumpt Registered User Join Date: Mar 2012 Location: Melbourne Victoria Posts: 35	Re: 67CST rebuild down under Coming along nicely mate. You got any more info on your engine build.

12-13-2012, 11:32 PM	#200
chewychevy67 Registered User Join Date: Jan 2010 Location: Here Posts: 5,426	Re: 67CST rebuild down under That is a nice truck. Love the white 67 roofline. Subscribed! Posted via Mobile Device

Register or Log In To remove these advertisements.