What did you do to your truck today! - Page 89 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

longblue72 · 04-26-2011, 11:12 PM

I told her how pretty she's gonna be soon and that i hoped to hear her talk tomorrow, then tucked her in to bed. I told her i wouldnt look at another truck the same as i do her, but man its hard on this site!

jjtackleberry · 04-27-2011, 06:17 PM

Doing a cluster swap....did the "re-pinning"......ran the lead off the battery....ran the lead from the alternator.....fused both......now have to switch the sending units

**FRENCHBLUE72** · 04-27-2011, 08:44 PM

Ordered parts and welded up holes..

jhwkns · 04-27-2011, 10:50 PM

I sprayed some paint. I'll get the bed back on it, and painted tomorrow.

ItsRandy · 04-28-2011, 12:53 AM

Mounted my carburetor and finished bending my fuel line from the pump to the carburetor. Repainted and remounted my panhard bar.

1low · 04-28-2011, 09:33 PM

Mounted my coilovers

**Hart_Rod** · 04-28-2011, 10:27 PM

Installed my electric cutouts. Here's a video and a picture,

.

YouTube - 68 Supercharged C-10

67Slider · 04-28-2011, 11:52 PM

Scored a power steering pump with brackets and pulley, P/S gearbox, crank shaft pully and hoses for $63 at the pick-n-pull. Now I've got to clean em up and paint them.

Jeffs70 · 04-29-2011, 01:09 AM

Quote:

Originally Posted by Hart_Rod

Installed my electric cutouts. Here's a video and a picture,

.

YouTube - 68 Supercharged C-10

That looks and sounds sweet Hart Rod. great looking setup

Jeffs70 · 04-29-2011, 01:12 AM

finished fabricating my front air bag brackets and cups. got most of it installed will have it finished tomorrow morning

DT1 · 04-29-2011, 11:01 AM

Quote:

Originally Posted by wwotr

DT1,

Where in the "Desert of California"?

I'm in Palm Desert, (15 Miles East of Palm Springs) in the Coachella Valley.

Lancaster, Antelope Valley

67Slider · 05-01-2011, 11:31 PM

Degreased and painted my new(old) power steering gear box. Me and my 9 year old son spent the better part of two hours degreasing and cleaning, unitil he got bored and wanted to go play with the neighbor kid. I was surprised he lasted so long and he told me this was one of his "best days ever". I sure love that kid!
[IMG]

[/IMG]

Jeffs70 · 05-02-2011, 12:17 AM

got a set of low back bucket seats for FREE! I am stoked, They need some work but I am not ready for them yet any how.

Name: P4080077.jpg
Views: 601
Size: 75.5 KB

Name: P4080077.jpg
Views: 601
Size: 75.5 KB

I am not to sure how the console looks but I may change some designs of it to get it to look good in the end but over all im getting there.
Name: P4080095.jpg
Views: 562
Size: 38.2 KB

Name: P4080095.jpg
Views: 562
Size: 38.2 KB

Jeffs70 · 05-02-2011, 12:20 AM

I also got a few bags on my truck this weekend and am very happy with the looks and how they are coming along. in the last picture it shows the bags aired out. well the truck sits right about 1/2" from the ground and cross member

Name: BagAiredUpControl.jpg
Views: 604
Size: 40.3 KB

Name: BagAiredUpControl.jpg
Views: 604
Size: 40.3 KB

Name: RearAirdUp.jpg
Views: 588
Size: 46.5 KB

Name: AllUP.jpg
Views: 578
Size: 44.9 KB

Name: Dumped.jpg
Views: 581
Size: 44.0 KB

Bennett68C10 · 05-02-2011, 07:10 AM

Finished my h-pipe and finished welding my exhaust up.

6772owner · 05-02-2011, 09:55 AM

Over the weekend, I cut out my old trans crossmember and installed the ECE piece, had to remove my exhaust (y-pipe back) and now cant get the exhaust back on.

Old

New

I also cleaned up the exhaust (and tip) and painted it where I "clearenced" it. Looks like for nothing... Im going to have to remake the exhaust I think, I hammered on it for awile and test fit it twice, but its still mashed against the crossmember... Oh well, it was too loud anyway, time for a real muffler...

Cleaned Up

Clearenced...

I also swapped out the fuel sender in my 67' for a 3/8" unit and started bending up new 3/8" aluminum line from the tank to the mechanical pump. The truck came from the PO with the smaller 6 cylinder fuel system (5/16" I think) and it seems to kill me on upper RPM's under load. At least Im hoping this is the problem, new intake, fuel filter, new sock (old sender now) and reworked carb havent solved the problem yet. Ill get some pics of it tomorrow.

Redneck-Mafia · 05-02-2011, 12:04 PM

I cut the rusted out roof off the truck and started adding the new one that I've been prepping and shaving the drip rail on for a few months!

Cooper33 · 05-02-2011, 12:06 PM

Quote:

Originally Posted by 67Slider

Degreased and painted my new(old) power steering gear box. Me and my 9 year old son spent the better part of two hours degreasing and cleaning, unitil he got bored and wanted to go play with the neighbor kid. I was surprised he lasted so long and he told me this was one of his "best days ever". I sure love that kid!

Sometimes kids know exactly what to say.

ItsRandy · 05-07-2011, 02:36 AM

Installed my new rear shock relocator kit.

jhwkns · 05-07-2011, 05:46 PM

I took it to a car show. It was a fun day. There were a few old friends there that I hadn't seen in a while. On the way home, another guy in a real nice '67 short fleet and I cruised together for several miles.

One of these day's I'll run into another board member at a local show. It's pretty rare to see more than 3 or 4 of our trucks at an event out here.

**70cst** · 05-07-2011, 05:56 PM

Dream about it...

**FRENCHBLUE72** · 05-07-2011, 06:09 PM

Digging out seam sealer ans welding up cab seams..

redmonster · 05-07-2011, 06:18 PM

fixed some of the rust holes on passenger kick panel and glassed them over

redmonster · 05-07-2011, 06:19 PM

also bought peel n seal from lowes and started laying it down on the passenger side should start the driver side tonight

redmonster · 05-07-2011, 06:20 PM

best $40 bucks ever spent peel n seal thanks to the members who posted on here about the product

04-26-2011, 11:12 PM	#2201
longblue72 Registered User Join Date: Feb 2011 Location: ellicott city maryland Posts: 150	Re: What did you do to your truck today! I told her how pretty she's gonna be soon and that i hoped to hear her talk tomorrow, then tucked her in to bed. I told her i wouldnt look at another truck the same as i do her, but man its hard on this site!

04-27-2011, 06:17 PM	#2202
jjtackleberry Registered User Join Date: Feb 2011 Location: kansas Posts: 306	Re: What did you do to your truck today! Doing a cluster swap....did the "re-pinning"......ran the lead off the battery....ran the lead from the alternator.....fused both......now have to switch the sending units __________________ '71 Chevy LWB all OG '86 Chevy LWB all OG It's all a matter of perception

04-27-2011, 08:44 PM	#2203
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: What did you do to your truck today! Ordered parts and welded up holes.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

04-27-2011, 10:50 PM	#2204
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	Re: What did you do to your truck today! I sprayed some paint. I'll get the bed back on it, and painted tomorrow. __________________ I intend to live forever. So far, so good.

04-28-2011, 12:53 AM	#2205
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What did you do to your truck today! Mounted my carburetor and finished bending my fuel line from the pump to the carburetor. Repainted and remounted my panhard bar. Attached Images

04-28-2011, 09:33 PM	#2206
1low Registered User Join Date: Feb 2010 Location: Moyie Springs ID. Posts: 160	Re: What did you do to your truck today! Mounted my coilovers

04-28-2011, 11:52 PM	#2208
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: What did you do to your truck today! Scored a power steering pump with brackets and pulley, P/S gearbox, crank shaft pully and hoses for $63 at the pick-n-pull. Now I've got to clean em up and paint them. __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500

04-29-2011, 01:12 AM	#2210
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: What did you do to your truck today! finished fabricating my front air bag brackets and cups. got most of it installed will have it finished tomorrow morning __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004

05-01-2011, 11:31 PM	#2212
67Slider Registered User Join Date: Mar 2010 Location: Pueblo West, CO Posts: 944	Re: What did you do to your truck today! Degreased and painted my new(old) power steering gear box. Me and my 9 year old son spent the better part of two hours degreasing and cleaning, unitil he got bored and wanted to go play with the neighbor kid. I was surprised he lasted so long and he told me this was one of his "best days ever". I sure love that kid! [IMG][/IMG] __________________ 67 C10 Stepside 66 Mustang Coupe 99 Burb 2500

05-02-2011, 12:17 AM	#2213
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: What did you do to your truck today! got a set of low back bucket seats for FREE! I am stoked, They need some work but I am not ready for them yet any how. I am not to sure how the console looks but I may change some designs of it to get it to look good in the end but over all im getting there. __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004

05-02-2011, 12:20 AM	#2214
Jeffs70 Registered User Join Date: Oct 2007 Location: Valley Springs, Ca Posts: 857	Re: What did you do to your truck today! I also got a few bags on my truck this weekend and am very happy with the looks and how they are coming along. in the last picture it shows the bags aired out. well the truck sits right about 1/2" from the ground and cross member __________________ My Build Thread http://67-72chevytrucks.com/vboard/s...d.php?t=442487 My Picture Gallery http://67-72chevytrucks.com/gallery/...0&ppuser=36004 Last edited by Jeffs70; 05-02-2011 at 12:22 AM.

05-02-2011, 07:10 AM	#2215
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: What did you do to your truck today! Finished my h-pipe and finished welding my exhaust up. __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10

05-02-2011, 09:55 AM	#2216
6772owner Gearhead Join Date: Jan 2008 Location: Colorado Posts: 1,193	Re: What did you do to your truck today! Over the weekend, I cut out my old trans crossmember and installed the ECE piece, had to remove my exhaust (y-pipe back) and now cant get the exhaust back on. Old New I also cleaned up the exhaust (and tip) and painted it where I "clearenced" it. Looks like for nothing... Im going to have to remake the exhaust I think, I hammered on it for awile and test fit it twice, but its still mashed against the crossmember... Oh well, it was too loud anyway, time for a real muffler... Cleaned Up Clearenced... I also swapped out the fuel sender in my 67' for a 3/8" unit and started bending up new 3/8" aluminum line from the tank to the mechanical pump. The truck came from the PO with the smaller 6 cylinder fuel system (5/16" I think) and it seems to kill me on upper RPM's under load. At least Im hoping this is the problem, new intake, fuel filter, new sock (old sender now) and reworked carb havent solved the problem yet. Ill get some pics of it tomorrow. __________________ 2002 Saturn SL2, My D/D 2019 Ford Fusion SE, Ecoboost - Wife's D/D 1993 Camaro Z28, A4, CAI, Cat-Back Exhaust Project C10 (my 72' C10 w/96' LT1, 700R4, bagged F&R, 18's (for now), Short/Fleet) -- SOLD! Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=313644 Last edited by 6772owner; 05-02-2011 at 10:06 AM. Reason: text

05-02-2011, 12:04 PM	#2217
Redneck-Mafia Registered User Join Date: Jan 2008 Location: SoCal Posts: 74	Re: What did you do to your truck today! I cut the rusted out roof off the truck and started adding the new one that I've been prepping and shaving the drip rail on for a few months! Attached Images __________________ Dave in Socal 69 Chevy C10 42 BSA WM20 47 Harley WL

05-07-2011, 02:36 AM	#2219
ItsRandy Registered User Join Date: Nov 2010 Location: Grand Terrace, Ca. Posts: 1,607	Re: What did you do to your truck today! Installed my new rear shock relocator kit.



Register or Log In To remove these advertisements.

05-07-2011, 05:46 PM	#2220
jhwkns Registered Cruiser Join Date: May 2002 Location: Las Vegas NV Posts: 2,230	Re: What did you do to your truck today! I took it to a car show. It was a fun day. There were a few old friends there that I hadn't seen in a while. On the way home, another guy in a real nice '67 short fleet and I cruised together for several miles. One of these day's I'll run into another board member at a local show. It's pretty rare to see more than 3 or 4 of our trucks at an event out here. __________________ I intend to live forever. So far, so good.

05-07-2011, 05:56 PM	#2221
70cst Senior Member Join Date: Feb 2001 Location: New Madison, Ohio Posts: 21,365	Re: What did you do to your truck today! Dream about it... __________________ A husband can be right...or...A husband can be happy. 67-72 Chevy and GMC Trucks...The Classic Truck for the Classic Folk. 1970 CST Two tone green, 402BB, 400 Automatic, Tach, Buckets, AC, AM-FM, Tilt, GM CB, GM 8 Tract, LWB, etc JOHN 17:3...The better side of "LIFE" Remember: Everyday is a good day...Some are just gooder!

05-07-2011, 06:09 PM	#2222
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	Re: What did you do to your truck today! Digging out seam sealer ans welding up cab seams.. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..

05-07-2011, 06:18 PM	#2223
redmonster Registered User Join Date: Dec 2008 Location: EL PASO,TEJAS Posts: 212	Re: What did you do to your truck today! fixed some of the rust holes on passenger kick panel and glassed them over __________________ WITNESS Dont be like me be better than me

05-07-2011, 06:19 PM	#2224
redmonster Registered User Join Date: Dec 2008 Location: EL PASO,TEJAS Posts: 212	Re: What did you do to your truck today! also bought peel n seal from lowes and started laying it down on the passenger side should start the driver side tonight __________________ WITNESS Dont be like me be better than me

05-07-2011, 06:20 PM	#2225
redmonster Registered User Join Date: Dec 2008 Location: EL PASO,TEJAS Posts: 212	Re: What did you do to your truck today! best $40 bucks ever spent peel n seal thanks to the members who posted on here about the product __________________ WITNESS Dont be like me be better than me

Register or Log In To remove these advertisements.