CA 69 C20 being parted - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

454C10CHEVY · 10-13-2012, 07:15 PM

do u still have grills and front bumper?

Jerry Jones · 10-14-2012, 01:26 PM

Quote:

Originally Posted by 454C10CHEVY

do u still have grills and front bumper?

I do, I have 2 of each, do you want to come see them? I am next door to Pittsburg.

454C10CHEVY · 10-14-2012, 02:39 PM

Yea i could stop by today pm me address and number and a good time
Posted via Mobile Device

Jerry Jones · 10-14-2012, 03:00 PM

PM sent!

hpcgmc · 11-01-2012, 12:41 AM

I'm looking for a good set of front and rear chrome bumpers (not the heavy duty rear bumper, the smoothie one), plus the rear bumper brackets to replace my Barden rear bumper. They don't have to be perfect, but I'm looking for some in pretty nice shape. I'm about 100 miles away, so worth the drive if they are in good shape.

Jerry Jones · 11-01-2012, 12:53 AM

I have a good "driver" front and a very nice "driver" front, I only have step bumpers for the rear.

I am looking for $75 for the good and $125 for the very nice for locals.

Where are you located?

**67ChevNut** · 11-01-2012, 01:53 PM

Didn't read the whole thread, but do you still have the 69 grills? I want the best one you have if so. How about the grill insert? How much to 78852?
Posted via Mobile Device

Jerry Jones · 11-01-2012, 02:08 PM

Quote:

Originally Posted by 67ChevNut

Didn't read the whole thread, but do you still have the 69 grills? I want the best one you have if so. How about the grill insert? How much to 78852?
Posted via Mobile Device

Check posts 51 and 62 for the pic's that I have of the grille. I was looking to get $100 for it. The insert is gone. I will have to check on shipping and get back to you.

**67ChevNut** · 11-01-2012, 03:51 PM

Sounds good, let me know.

aftamathe86 · 11-02-2012, 11:43 AM

Do you gave the rod that goes from the gas pedal shaft to the carb I need one for a v8 if so how much shipped to 37110 thanks
Posted via Mobile Device

Jerry Jones · 11-02-2012, 12:41 PM

Quote:

Originally Posted by aftamathe86

Do you gave the rod that goes from the gas pedal shaft to the carb I need one for a v8 if so how much shipped to 37110 thanks
Posted via Mobile Device

This? The threaded end has some bend in it but the pivot runs up and down, one spot needs a little effort.

aftamathe86 · 11-02-2012, 03:26 PM

Yes that's it
Posted via Mobile Device

cheviss427 · 11-02-2012, 05:37 PM

Hello, Do you have an auto crossmember? And shipping to 98632....Thanks.

Jerry Jones · 11-02-2012, 07:25 PM

Quote:

Originally Posted by aftamathe86

Yes that's it
Posted via Mobile Device

Ok I will figure shipping by the end of tomorrow

Quote:

Originally Posted by cheviss427

Hello, Do you have an auto crossmember? And shipping to 98632....Thanks.

I think it is still there, I will check tomorrow.

Jerry Jones · 11-02-2012, 08:43 PM

Quote:

Originally Posted by aftamathe86

Yes that's it
Posted via Mobile Device

$16 shipped

aftamathe86 · 11-02-2012, 11:39 PM

Sounds good pm me ur paypal info thanks
Posted via Mobile Device

Jerry Jones · 11-04-2012, 07:10 PM

Quote:

Originally Posted by cheviss427

Hello, Do you have an auto crossmember? And shipping to 98632....Thanks.

Here it is, I have not been able to pull it yet, but I will take $35 plus the ride in it.

If you are interested in that I will pull it and get shipping details.

Camper Special 396 · 11-14-2012, 11:31 PM

Do you have the rear of rear spring hanger and shackle for a leaf spring rear suspension?
Posted via Mobile Device

Jerry Jones · 11-15-2012, 06:36 PM

Quote:

Originally Posted by Camper Special 396

Do you have the rear of rear spring hanger and shackle for a leaf spring rear suspension?
Posted via Mobile Device

If it is what I am thinking I should have it.

Camper Special 396 · 11-15-2012, 09:34 PM

If the truck has a leaf spring suspension the parts I need is the rear spring hanger which is riveted to the frame, and then the shackle that connects it to the spring. There is a hanger and shackle at the front of thr
E spring and another one that mounts the rear of the spring. I am looking for the rear hanger and shackle
Posted via Mobile Device

Camper Special 396 · 11-19-2012, 09:37 PM

Still looking for spring hangers and spring shackles. Let me know. Thanks.

Jerry Jones · 11-29-2012, 11:16 AM

Quote:

Originally Posted by Camper Special 396

Still looking for spring hangers and spring shackles. Let me know. Thanks.

Sorry for the delayed response, I have been swamped in my day job. The frame is complete, so they should be there, if I can get out there this weekend between rain storms I will snap some pics.

Camper Special 396 · 11-29-2012, 10:33 PM

Thanks. I understand.

10-13-2012, 07:15 PM	#201
454C10CHEVY Registered User Join Date: Aug 2012 Location: Midland,Tx Posts: 103	Re: 69 C20 being parted do u still have grills and front bumper? __________________ 72 C10 SWB Stepper 350/TH400 (might sell) 70 C10 SWB Stepper I6/4SPD (CURRENT PROJECT) 00 Silverado Rc 1500 2WD 5.3 09 Silverado Cc 5.3 2WD 4/6 DROP 04 Silverado ext 5.3 4WD

10-14-2012, 02:39 PM	#203
454C10CHEVY Registered User Join Date: Aug 2012 Location: Midland,Tx Posts: 103	Re: 69 C20 being parted Yea i could stop by today pm me address and number and a good time Posted via Mobile Device __________________ 72 C10 SWB Stepper 350/TH400 (might sell) 70 C10 SWB Stepper I6/4SPD (CURRENT PROJECT) 00 Silverado Rc 1500 2WD 5.3 09 Silverado Cc 5.3 2WD 4/6 DROP 04 Silverado ext 5.3 4WD

10-14-2012, 03:00 PM	#204
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,408	Re: 69 C20 being parted PM sent! __________________ RIP El Jay! Love you brother!

11-01-2012, 12:41 AM	#205
hpcgmc Registered User Join Date: Oct 2012 Location: Northern Cal Posts: 249	Re: 69 C20 being parted I'm looking for a good set of front and rear chrome bumpers (not the heavy duty rear bumper, the smoothie one), plus the rear bumper brackets to replace my Barden rear bumper. They don't have to be perfect, but I'm looking for some in pretty nice shape. I'm about 100 miles away, so worth the drive if they are in good shape. __________________ 1967 GMC 1500 SWB. Driving this truck since I was 14.

11-01-2012, 12:53 AM	#206
Jerry Jones Happy Camper Join Date: Feb 2006 Location: Northern California Posts: 8,408	Re: 69 C20 being parted I have a good "driver" front and a very nice "driver" front, I only have step bumpers for the rear. I am looking for $75 for the good and $125 for the very nice for locals. Where are you located? __________________ RIP El Jay! Love you brother!

11-01-2012, 01:53 PM	#207
67ChevNut Active Member Join Date: Mar 2009 Location: Eagle Pass, Posts: 195	Re: 69 C20 being parted Didn't read the whole thread, but do you still have the 69 grills? I want the best one you have if so. How about the grill insert? How much to 78852? Posted via Mobile Device

11-01-2012, 03:51 PM	#209
67ChevNut Active Member Join Date: Mar 2009 Location: Eagle Pass, Posts: 195	Re: 69 C20 being parted Sounds good, let me know.

11-02-2012, 11:43 AM	#210
aftamathe86 Registered User Join Date: Feb 2010 Location: mcminnville,tn Posts: 153	Re: 69 C20 being parted Do you gave the rod that goes from the gas pedal shaft to the carb I need one for a v8 if so how much shipped to 37110 thanks Posted via Mobile Device __________________ 67 step---68 fleet---67 fleet

11-02-2012, 03:26 PM	#212
aftamathe86 Registered User Join Date: Feb 2010 Location: mcminnville,tn Posts: 153	Re: 69 C20 being parted Yes that's it Posted via Mobile Device __________________ 67 step---68 fleet---67 fleet

11-02-2012, 05:37 PM	#213
cheviss427 Registered User Join Date: Jun 2007 Location: longview,wa. Posts: 38	Re: 69 C20 being parted Hello, Do you have an auto crossmember? And shipping to 98632....Thanks.

11-02-2012, 11:39 PM	#216
aftamathe86 Registered User Join Date: Feb 2010 Location: mcminnville,tn Posts: 153	Re: 69 C20 being parted Sounds good pm me ur paypal info thanks Posted via Mobile Device __________________ 67 step---68 fleet---67 fleet

11-14-2012, 11:31 PM	#218
Camper Special 396 Registered User Join Date: Nov 2012 Location: East Greenville PA Posts: 28	Re: 69 C20 being parted Do you have the rear of rear spring hanger and shackle for a leaf spring rear suspension? Posted via Mobile Device

11-15-2012, 09:34 PM	#220
Camper Special 396 Registered User Join Date: Nov 2012 Location: East Greenville PA Posts: 28	Re: 69 C20 being parted If the truck has a leaf spring suspension the parts I need is the rear spring hanger which is riveted to the frame, and then the shackle that connects it to the spring. There is a hanger and shackle at the front of thr E spring and another one that mounts the rear of the spring. I am looking for the rear hanger and shackle Posted via Mobile Device

11-19-2012, 09:37 PM	#221
Camper Special 396 Registered User Join Date: Nov 2012 Location: East Greenville PA Posts: 28	Re: 69 C20 being parted Still looking for spring hangers and spring shackles. Let me know. Thanks.

11-29-2012, 10:33 PM	#223
Camper Special 396 Registered User Join Date: Nov 2012 Location: East Greenville PA Posts: 28	Re: 69 C20 being parted Thanks. I understand.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.