|
02-12-2019, 04:39 PM | #1 |
Registered User
Join Date: Aug 2009
Location: St. Paul MN.
Posts: 1,996
|
Re: What did you do to your truck today.The 3rd chapter
Put new distributor in and some wiring done.
__________________
Fuzzy |
02-13-2019, 03:06 PM | #2 |
Registered User
Join Date: Sep 2018
Location: Newcastle, New South Wales, Australia
Posts: 139
|
Re: What did you do to your truck today.The 3rd chapter
Not done yet, but on the weekend I will be fitting my "Spot Light".
I got a NOS bracket of Ebay and a 6" light, nice old one with the correct length shaft, Ivory colored handle. It has the original GE lamp. I think it need a new wire, I pick it up this afternoon. I am not sure where I will wire it from, Maybe through a relay switched from the ignition. |
02-15-2019, 10:46 AM | #3 |
Senior Member
Join Date: May 2006
Location: Philadelphia, Pa. 19454
Posts: 9,691
|
Re: What did you do to your truck today.The 3rd chapter
very impressive engine detail. I sorta have the same setup on my PCV, but was wondering if you used a tube nut to fasten it. Mine has a collar just RTV d keep ing it on
[url=https://flic.kr/p/2dnBcmX]20190215_094812
__________________
Semper Fi...Uncle Sam, you da man All parts offered to help are free, unless otherwise noted Dont try this stuff in my build thread, unless you have 55 years of mechanical OTJ training SAFETY FIRST AS usual, off topic They say your mind goes second, can't remember the first Jim Last edited by jaros44sr; 02-15-2019 at 10:51 AM. |
02-15-2019, 11:04 AM | #4 |
Registered User
Join Date: Aug 2009
Location: St. Paul MN.
Posts: 1,996
|
Re: What did you do to your truck today.The 3rd chapter
I used a regular -6 fitting with a nylon insert pushed in the fitting and then installed on pcv and carb. Smoke tested and no leaks. It was a pain and probably 2 hours work grinding on the fitting. Thanks
__________________
Fuzzy |
02-15-2019, 08:19 PM | #5 |
Senior Member
Join Date: Oct 2014
Location: New Palestine In
Posts: 931
|
Re: What did you do to your truck today.The 3rd chapter
No Pics to show but I finished putting the doors back together with new glass run channels, window regulators, door relays, and whiskers. I'm amazed at the difference, windows are nice and tight now and roll up and down smoooth. And a shout to Randy500 for his spot on instructions on tear down and reassembly of the components.
__________________
Phil "Money is only a tool to create and achieve what you want most in life" PayPal: rodnrudy@comcast.net |
02-16-2019, 01:00 PM | #6 |
Senior Member
Join Date: Sep 2014
Location: Wenatchee, Wa
Posts: 922
|
Re: What did you do to your truck today.The 3rd chapter
X2 re Randy500.... Good looking repairs there Phil!
|
02-14-2019, 11:24 PM | #7 |
Registered User
Join Date: Apr 2018
Location: Austin
Posts: 75
|
Re: What did you do to your truck today.The 3rd chapter
first drive since buying and wrenching on it!
took it to get gas... no issues! |
02-16-2019, 02:32 PM | #8 |
Senior Member
Join Date: Jun 2005
Location: Winona Lake, IN
Posts: 6,352
|
Re: What did you do to your truck today.The 3rd chapter
Got my motor torn down to a short block so I can get the heads rebuilt and replace the iron intake with an aluminum one.
__________________
70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Sliding Rear Window Power Windows Power Locks Sniper EFI 2015 Silverado 1500 LS 4.3/6L80/3.23 lowered 2" front & rear |
02-17-2019, 09:06 AM | #9 |
Senior Member
Join Date: Mar 2011
Location: Hanover NJ
Posts: 4,242
|
Re: What did you do to your truck today.The 3rd chapter
what motor ? what manifold ? what carb ? im looking to replace my stock manifold on SB stock motor had a 4 barrel holley on it when i purchased the motor thanks just looking for options .....
__________________
Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557 |
02-17-2019, 06:33 PM | #10 |
Registered User
Join Date: Apr 2015
Location: Ayr Ontario
Posts: 1,122
|
Re: What did you do to your truck today.The 3rd chapter
It's up on the two stage cribs I made, not too bad lifting it there in two stages.
__________________
Do it, Do it right, Do it right the first time |
02-17-2019, 07:06 PM | #11 |
Senior Member
Join Date: Sep 2014
Location: Wenatchee, Wa
Posts: 922
|
Re: What did you do to your truck today.The 3rd chapter
Nicely done!
|
02-17-2019, 08:07 PM | #12 |
Registered User
Join Date: Oct 2012
Location: Rose Hill Kansas
Posts: 1,351
|
Re: What did you do to your truck today.The 3rd chapter
Nice work....now that you have er up in the air, what your next plans?....drop tranny, new exhaust?
__________________
1970 C10 Short Stepper with 71/72 front clip. |
02-17-2019, 08:37 PM | #13 |
Registered User
Join Date: Apr 2015
Location: Ayr Ontario
Posts: 1,122
|
Re: What did you do to your truck today.The 3rd chapter
I've put about 5000miles on it since bolt off resto so with it up in the air and the suspension is under load. I want to retorque all the bolts, clean, change some fluids, and give it a going over. I have to add some static electricity grounding straps. I'm finishing the wiring to the P/L, P/W and interior light door pins. With the truck being low and me old I'll take any easy way. Maybe some exhaust work.
__________________
Do it, Do it right, Do it right the first time |
02-17-2019, 09:17 PM | #14 | |
Senior Member
Join Date: Oct 2014
Location: New Palestine In
Posts: 931
|
Re: What did you do to your truck today.The 3rd chapter
Quote:
I see a trip to Lowes for some 2x4's in the near future.
__________________
Phil "Money is only a tool to create and achieve what you want most in life" PayPal: rodnrudy@comcast.net |
|
02-17-2019, 10:24 PM | #15 |
Registered User
Join Date: Apr 2015
Location: Ayr Ontario
Posts: 1,122
|
Re: What did you do to your truck today.The 3rd chapter
I bought the 2x4's on Kijiji for cheaper than store prices. It went very easy with it being two stages and was all done with my jack and no blocks on it.
__________________
Do it, Do it right, Do it right the first time |
08-27-2019, 10:37 AM | #16 |
Registered User
Join Date: Sep 2018
Location: West Jordan, UT
Posts: 71
|
Re: What did you do to your truck today.The 3rd chapter
Love that idea to get it up higher off the ground, might have to make my own!
Do they just stack up, or do you have them anchored together somehow?
__________________
Thx, Lintcollector '72 C10 Fleetside Big Block See my build thread here: http://67-72chevytrucks.com/vboard/s...d.php?t=771552 |
08-27-2019, 04:36 PM | #17 |
Registered User
Join Date: Jul 2018
Location: Catskill Mountains,NY
Posts: 8,622
|
Re: What did you do to your truck today.The 3rd chapter
Hung the radiator support and bolted on the door and fender . Both OEM pieces everything lined up pretty well even the rocker with a few 5 pound sledgehammer plows on a 2x4 . Came to the cab corner . It was a cluster ###! . It was almost like it was for an extended cab . Had to cut it into 3 pizza slices just to get it to line up. 5 hours I would rather not repeat. Other side is getting a few small pieces.
If anyone is doing cab corners stay away from the CHL brand
__________________
Mark 72 c20 custom camper Husky edition, 66 SS396 Chevelle 1964 Hawk, 63 Avanti,62 lark 1969 AMX , 1968 c20 stepside ,85 K20 1977 Suburban sold 68 anniversary. |
02-17-2019, 12:17 AM | #18 |
Registered User
Join Date: Jun 2012
Location: Clearwater Beach Florida
Posts: 872
|
Re: What did you do to your truck today.The 3rd chapter
Got a lot done today. Repaired back panel. Finished the door which took way too many days to complete. I thought I was finished numerous times later to find it wasn't straight. Pulled the front and rear glass. Getting closer each day.
Last edited by 66clow; 02-17-2019 at 07:52 AM. |
02-17-2019, 10:41 PM | #19 |
Registered User
Join Date: Nov 2017
Location: SLC Utah
Posts: 210
|
Re: What did you do to your truck today.The 3rd chapter
Tearing down the NP 205 for a rebuild and 6L90E adapter kit install...
|
02-17-2019, 10:48 PM | #20 |
Registered User
Join Date: Apr 2015
Location: Ayr Ontario
Posts: 1,122
|
Re: What did you do to your truck today.The 3rd chapter
Boot trays work well.
__________________
Do it, Do it right, Do it right the first time |
02-17-2019, 10:56 PM | #21 |
Registered User
Join Date: Nov 2017
Location: SLC Utah
Posts: 210
|
Re: What did you do to your truck today.The 3rd chapter
They are amazing! Stumbled onto using mine almost by accident, but going to use it more moving forward!
|
02-17-2019, 11:24 PM | #22 |
Registered User
Join Date: Aug 2017
Location: Chicago,il
Posts: 361
|
Re: What did you do to your truck today.The 3rd chapter
Mounted the trans. The lazy way
|
02-17-2019, 11:34 PM | #23 |
Senior Member
Join Date: Mar 2011
Location: Hanover NJ
Posts: 4,242
|
Re: What did you do to your truck today.The 3rd chapter
fabbed a bracket to hold the exhaust brackets
__________________
Doc & Kim build http://67-72chevytrucks.com/vboard/s...d.php?t=722288 I am from the desert http://67-72chevytrucks.com/vboard/s...d.php?t=650332 basket case build SOLD http://67-72chevytrucks.com/vboard/s...d.php?t=648557 |
02-18-2019, 12:58 AM | #24 |
Registered User
Join Date: Dec 2015
Location: Prescott Arizona
Posts: 621
|
Re: What did you do to your truck today.The 3rd chapter
I am so out of everyone's league here.
First day of working on my "new" '68. Made a custom gas pedal, scrap metal and parts box bolts that matched the tap sizes. Need to maintain the Bucket Of Bolts theme.
__________________
1968 Long Bed 2016 Honda Civic Coupe EX-T ticket magnet |
02-18-2019, 11:21 AM | #25 |
Registered User
Join Date: Apr 2018
Location: Riverdale, NJ
Posts: 85
|
Re: What did you do to your truck today.The 3rd chapter
I blew up my engine yesterday.
I guess it was just this engine's time. It's probably the factory 283. It has a rochester 2bbl on it and it smokes like a fiend, tons of blow- by too. I even topped off the oil the day beforehand, but I guess the rest of it was too thin. Regardless, about 12 minutes into my drive down Route 46, the gremlins came a'knockin. Couple hours waiting for the tow, and the truck is back in the driveway, sitting until I find a new heart for it. |
Bookmarks |
|
|