Porterbuilt Dropmembers & 22's on my 77 Ebay truck - Page 9 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

SCOTI · 05-08-2009, 01:05 PM

Quote:

Originally Posted by crawdadfox

Yeah but my hands didn't get dirty.....but i did get a paper cut opening the water pump box!

I didn't have to get my hands dirty either

. Now the guy @ the yard w/the tools on the other hand had to work that half hour..... so he did

.

I'll one-up your 'economy stimulation' . . ... I stimulated the economy while doing my ecological part for the planet (recycle for those who aren't 'green').

crawdadfox · 05-14-2009, 08:33 AM

After my "heavy duty" rear bags were installed.....

72 SHORTBED 7.0 · 05-14-2009, 01:15 PM

Man that thing is sick ....

SCOTI · 05-14-2009, 02:11 PM

That is a bad arse pic right there!

aggie91 · 05-15-2009, 08:52 AM

This just keep getting better. How about a pic of it at ride height?
Looks Good!

crawdadfox · 05-15-2009, 10:00 AM

Quote:

Originally Posted by aggie91

This just keep getting better. How about a pic of it at ride height?
Looks Good!

Here you go!

I will see about getting some new shots at ride height...which will be 4" from the frame to the ground. Glad you like the new/old bed graphics...i had a couple sets of the NOS. "Big 10 " decals and didnt know if i would like them on there or not.

crawdadfox · 05-30-2009, 06:13 PM

I installed a ACI Vanish low profile roll up bed cover on the truck today. It was one of a few thats available for our "old" trucks! The fit was very good with no drilling, and super easy to install.

silvrbreez · 05-30-2009, 09:24 PM

vetty nice!

similar to the truxedo lo-pro i'm rolling with on my Frontier.

SBTork · 05-30-2009, 09:30 PM

Quote:

Originally Posted by silvrbreez

vetty nice!

similar to the truxedo lo-pro i'm rolling with on my Frontier.

Yes, it looks like the same one to me too, I have a truxedo lo pro on my 2006 Silverado. Very nice cover, that one looks like a very good cover too. Love those "Big 10" decals

crawdadfox · 05-30-2009, 10:05 PM

Quote:

Originally Posted by SBTork

Yes, it looks like the same one to me too, I have a truxedo lo pro on my 2006 Silverado. Very nice cover, that one looks like a very good cover too. Love those "Big 10" decals

Thanks on the decals. I had a Truxedo cover on my 87 and this one is allmost identical. Now if the price would just go down...400 bucks...Ouch!

ShowSS12 · 05-31-2009, 12:16 AM

damn I like that cover....

SBTork · 05-31-2009, 01:31 PM

Quote:

Originally Posted by crawdadfox

Thanks on the decals. I had a Truxedo cover on my 87 and this one is allmost identical. Now if the price would just go down...400 bucks...Ouch!

Yeah, that's the one bad thing about those covers. They're not overpriced, but they're just damn expensive. The one on my '06 is just over two years old and still looks and works like brand new.

menace121978 · 05-31-2009, 09:56 PM

crawdadfox, your truck is sick!! excellent job man!

MrBeast · 06-02-2009, 09:08 AM

Crawdadfox, to be honest, slammed trucks have never tickled my fancy, I have always driven 4x4's with big tires, usually plenty of lift, and in the past few years, always with a big block. Recently I purchased my first 2wd Dually, a 72 C/30, and it is getting converted to a SRW 4x4 because I have since that time put together a 85 C-30 Crew Cab Dually to serve as my tow rig, and the last thing id ever dream about doing to it is slamming it.

That being said, I dig your truck, it is cool, it is clean, and it has style. I think you have done a mighty fine job putting it together, and if I ever make it over to NOLA id love to check it out, or vise versa if you ever venture over to my part of the 3rd coast with it.

jchav62 · 06-02-2009, 09:30 AM

Hey crawdad, your truck just keeps getting better and better... Love it!

I really like the decals and the bed cover... SICK!

BuiltByBrooks · 06-06-2009, 04:10 PM

Truck is sooo bad!!!

crawdadfox · 06-08-2009, 08:53 AM

Quote:

Originally Posted by MrBeast

Crawdadfox, to be honest, slammed trucks have never tickled my fancy, I have always driven 4x4's with big tires, usually plenty of lift, and in the past few years, always with a big block. Recently I purchased my first 2wd Dually, a 72 C/30, and it is getting converted to a SRW 4x4 because I have since that time put together a 85 C-30 Crew Cab Dually to serve as my tow rig, and the last thing id ever dream about doing to it is slamming it.

That being said, I dig your truck, it is cool, it is clean, and it has style. I think you have done a mighty fine job putting it together, and if I ever make it over to NOLA id love to check it out, or vise versa if you ever venture over to my part of the 3rd coast with it.

A compliment like yours seem to make the time and hard earned dollars worth while! Thanks to you and the others for the kind words, and if you get over this way look me up!

silvrbreez · 06-08-2009, 09:13 AM

I'm going to be in NO for a family wedding in mid August. I'm might have to swing by and check out the BIG10.

crawdadfox · 06-08-2009, 09:26 AM

A New Orleans wedding....now that will be a PARTY!!

Stop in and check it out, i'm in "smelling distance" of the big easy!

silvrbreez · 06-08-2009, 09:27 AM

You know it! I'll be in for a week so I'm sure I'll be able to make my way out to wherever you are. I'll be on the Westbank.

SCOTI · 06-08-2009, 09:31 AM

Quote:

Originally Posted by crawdadfox

A New Orleans wedding....now that will be a PARTY!!

Stop in and check it out, i'm in "smelling distance" of the big easy!

I've been to the French Quarter several times for Mardi Gras. That smelling distance poke is funny right there . . ....

silvrbreez · 06-08-2009, 09:34 AM

funny....but true

abebummy26 · 06-09-2009, 11:11 PM

Only in New Orleans will you smell a dude sitting out smoking a Joint in the middle of a square.

JohnC · 06-16-2009, 05:22 PM

I like the decals crawdad. They really keep with the stock appearance. Would be cool if you could have someone make you some that matched fonts that said "LOW 10"

ShowSS12 · 07-19-2009, 11:16 PM

any new updates?

05-14-2009, 08:33 AM	#202
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck After my "heavy duty" rear bags were installed..... Attached Images __________________ Down......with the sickness!!

05-14-2009, 01:15 PM	#203
72 SHORTBED 7.0 Registered User Join Date: Nov 2007 Location: dallas Tx in front of you Posts: 182	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Man that thing is sick ....

05-14-2009, 02:11 PM	#204
SCOTI Registered User Join Date: Apr 2001 Location: DALLAS,TX Posts: 21,919	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck That is a bad arse pic right there! __________________ 67SWB-B.B.RetroRod 64SWB-Recycle 89CCDually-Driver/Tow Truck 99CCSWB Driver All Fleetsides @rattlecankustoms in IG Building a small, high rpm engine with the perfect bore, stroke and rod ratio is very impressive. It's like a highly skilled Morrocan sword fighter with a Damascus Steel Scimitar..... *Cubic inches is like Indiana Jones with a cheap pistol.*

05-15-2009, 08:52 AM	#205
aggie91 I'm just glad to be here! Join Date: Jan 2008 Location: Longview, TX Posts: 4,788	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck This just keep getting better. How about a pic of it at ride height? Looks Good! __________________ Karl 1965 Chevy Stepside(Grandpa's Old Blue) and (July 2015 Shop Build!)(2020, the Saga Continues) http://67-72chevytrucks.com/vboard/s...d.php?t=372424 The LST Challenge: http://67-72chevytrucks.com/vboard/s...=1#post7812257 Korbin's 1st Square: "Sunburn" http://67-72chevytrucks.com/vboard/s...d.php?t=418618 1985 GMC Sierra: "White Trash", Korbin's 2nd now... http://67-72chevytrucks.com/vboard/s...d.php?t=632305 Henry - 1984 Chevrolet, Owen's 1st Square

05-30-2009, 06:13 PM	#207
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck I installed a ACI Vanish low profile roll up bed cover on the truck today. It was one of a few thats available for our "old" trucks! The fit was very good with no drilling, and super easy to install. Attached Images __________________ Down......with the sickness!!

05-30-2009, 09:24 PM	#208
silvrbreez Registered User Join Date: Oct 2008 Location: Lumberton, TX Posts: 64	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck vetty nice! similar to the truxedo lo-pro i'm rolling with on my Frontier.

05-31-2009, 12:16 AM	#211
ShowSS12 Registered User Join Date: Apr 2008 Location: Sugarland,Tejas Posts: 356	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck damn I like that cover.... __________________ Adam M STX Designs Motorcycles \| Choppers \| Hotrods

05-31-2009, 09:56 PM	#213
menace121978 Registered User Join Date: Jan 2009 Location: orangevale, ca Posts: 3,626	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck crawdadfox, your truck is sick!! excellent job man! __________________ "Dennis the Menace" 1978 Silverado (2wd, 1/2 ton, short bed)complete nut & bolt frame off restomod LQ9/4L80E MY LS SWAP/FRAME OFF BUILD BOOK 2006 TBSS way too much to list

06-02-2009, 09:08 AM	#214
MrBeast high-Tech Red Neck Join Date: Feb 2008 Location: Livingston, MT/On my boat WA/BC/AK Posts: 2,294	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Crawdadfox, to be honest, slammed trucks have never tickled my fancy, I have always driven 4x4's with big tires, usually plenty of lift, and in the past few years, always with a big block. Recently I purchased my first 2wd Dually, a 72 C/30, and it is getting converted to a SRW 4x4 because I have since that time put together a 85 C-30 Crew Cab Dually to serve as my tow rig, and the last thing id ever dream about doing to it is slamming it. That being said, I dig your truck, it is cool, it is clean, and it has style. I think you have done a mighty fine job putting it together, and if I ever make it over to NOLA id love to check it out, or vise versa if you ever venture over to my part of the 3rd coast with it. __________________ "He used to be a pretty nice feller, now he's a welder!"

06-02-2009, 09:30 AM	#215
jchav62 1962 C-10 Join Date: Apr 2005 Location: Las Vegas, New Mexico Posts: 4,978	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Hey crawdad, your truck just keeps getting better and better... Love it! I really like the decals and the bed cover... SICK! __________________ Joseph Chavez "See the USA in a Chevrolet!!" ......................_____ .........________//__{\_____ ,,,,,,,/__(O)___//___/__(O)_/ 1962 C10 Shortbed Fleetside 327/th350 GV overdrive 1974 C10 Longbed Fleetside 350/th350 "The Trash Truck" 1999 Chevy 2500 OBS, Longbed 5.7/4L80E 4x4 2015 GMC Sierra SLE 1500 4x4

06-06-2009, 04:10 PM	#216
BuiltByBrooks Argon User Join Date: Oct 2008 Location: Qc, AZ Posts: 353	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Truck is sooo bad!!!

06-08-2009, 09:13 AM	#218
silvrbreez Registered User Join Date: Oct 2008 Location: Lumberton, TX Posts: 64	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck I'm going to be in NO for a family wedding in mid August. I'm might have to swing by and check out the BIG10.

06-08-2009, 09:26 AM	#219
crawdadfox Registered User Join Date: Aug 2008 Location: New Orleans Louisiana.....a great place to visit but you wouldn't want to live here!!! Posts: 883	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck A New Orleans wedding....now that will be a PARTY!! Stop in and check it out, i'm in "smelling distance" of the big easy! __________________ Down......with the sickness!!

06-08-2009, 09:27 AM	#220
silvrbreez Registered User Join Date: Oct 2008 Location: Lumberton, TX Posts: 64	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck You know it! I'll be in for a week so I'm sure I'll be able to make my way out to wherever you are. I'll be on the Westbank.

06-08-2009, 09:34 AM	#222
silvrbreez Registered User Join Date: Oct 2008 Location: Lumberton, TX Posts: 64	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck funny....but true



Register or Log In To remove these advertisements.

06-09-2009, 11:11 PM	#223
abebummy26 Registered User Join Date: Sep 2006 Location: New Haven, MO Posts: 1,243	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck Only in New Orleans will you smell a dude sitting out smoking a Joint in the middle of a square. __________________ -Lincoln 1987 GMC S15 (soon to be a chevy clone) 2.5l, 4 speed, no ps, no pb, no ac Silence is golden, but duct tape is silver. Spoken by Cletus the hillbilly I like stickers... a whole bunch.

06-16-2009, 05:22 PM	#224
JohnC Registered User Join Date: Feb 2009 Location: Oklahoma Posts: 7,461	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck I like the decals crawdad. They really keep with the stock appearance. Would be cool if you could have someone make you some that matched fonts that said "LOW 10"

07-19-2009, 11:16 PM	#225
ShowSS12 Registered User Join Date: Apr 2008 Location: Sugarland,Tejas Posts: 356	Re: Porterbuilt Dropmembers & 22's on my 77 Ebay truck any new updates? __________________ Adam M STX Designs Motorcycles \| Choppers \| Hotrods

Register or Log In To remove these advertisements.