OR 1971 K20 parts F/S

[tallbob]

Thomas,
Thanks for getting back to me. I do not need all the cross sills. I think my short ones are fine but one of the ones towards the front and I am pretty sure the end one and the one next to it at the rear of the bed,not so good. I am in no hurry,so please keep me in mind. I will confirm and get back with you on which exact ones I need.
Bob

[DLTruck1973]

Originally Posted by tallbob

Thomas,
Thanks for getting back to me. I do not need all the cross sills. I think my short ones are fine but one of the ones towards the front and I am pretty sure the end one and the one next to it at the rear of the bed,not so good. I am in no hurry,so please keep me in mind. I will confirm and get back with you on which exact ones I need.
Bob

Thank you Bob,

Just let me know. I will try to get one in that has good sills but I do know the next truck in line does not have a bed so not much immediate help for you.

Thomas

[DLTruck1973]

Core support / front spring mounts / Left outer front bumper bracket photos for Tskeen on behalf of tll74

[jlampka]

Hi - I have a 1971 C20 and I am looking for the following items:

1) Driver door window regulator

2) Grill support with mounting hardware - center location behind the blue bowtie - stands vertical

3) Black plastic vent that mounts to the drivers side door jamb above the VIN plate

ship to 14120

Thanks for your time.

Jeff

[DLTruck1973]

Originally Posted by jlampka

Hi - I have a 1971 C20 and I am looking for the following items:

1) Driver door window regulator

2) Grill support with mounting hardware - center location behind the blue bowtie - stands vertical

3) Black plastic vent that mounts to the drivers side door jamb above the VIN plate

ship to 14120

Thanks for your time.

Jeff

Hi Jeff,

1) Driver door window regulator $35.00 for a nice one

2) Grill support with mounting hardware - center location behind the blue bowtie - stands vertical I have a very clean one one for $20.00 with all the clips and screws needed.

3) Black plastic vent that mounts to the drivers side door jamb above the VIN plate $10.00 for a nice not cracked one


ship to 14120

Let me know if interested and I will quote shipping.

Thank you,
Thomas

[best view]

need front bumper 4x4 brackets for a 72 chevy k20 also it has dual factory gas tank need the metal plate on floor telling witch tank its on, and the gauge knob on dash by the door to switch gas gauge

[72 Cheyenne K20]

Hi, wanted to ask if you have the 4x4 Dip Stick.

Thanks, Scott

[71blazer1919]

Do you have a front 4x4 drive shaft available? Also looking for all 3 front grill brackets. Thanks

[72 blue]

Tom and Tom ....congrats on the merger ! I'm about ready to buy a grill surrond for my truck......looking for an original in excellent shape......let me know what you have or keep me in mind for one.......
Thank you
Rick Jackson
Pell City, AL

[DLTruck1973]

Originally Posted by best view

need front bumper 4x4 brackets for a 72 chevy k20 also it has dual factory gas tank need the metal plate on floor telling witch tank its on, and the gauge knob on dash by the door to switch gas gauge

I have the drivers side bumper bracket for a 71/72 4x4 for $25.00 plus shipping.

I do not have anything for the gas gauge switch plate or knob.

Let me know if interested in the bumper bracket.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by 72 Cheyenne K20

Hi, wanted to ask if you have the 4x4 Dip Stick.

Thanks, Scott

Not at this time Scott. It is a tough one to find.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by 71blazer1919

Do you have a front 4x4 drive shaft available? Also looking for all 3 front grill brackets. Thanks

Yes on the front shaft for $125.00 plus the ship.

Yes on the 3 grill brackets $15.00 each. You are talking about the side ones that rivet to the shell and the center that is bolted/screwed on?

Let me know,

Thank you,
Thomas

[DLTruck1973]

Originally Posted by 72 blue

Tom and Tom ....congrats on the merger ! I'm about ready to buy a grill surrond for my truck......looking for an original in excellent shape......let me know what you have or keep me in mind for one.......
Thank you
Rick Jackson
Pell City, AL

Hi Rick,

Thank you. I am not sure about the grill surround yet. We have a few, one is pretty nice but not sure if it is available. I will have to check with Tom next week when he gets back.

We only ship these in a wood box and shipping does get pricey.

I will let you know soon.

Thank you,
Thomas

[clang6]

Originally Posted by DLTruck1973

Hi Dan,

I do have the link you need. It has some nice tie rod ends on it as well. The bar itself has a few teeth marks from a pipe wrench and is not dead eye straight but is very close and looks good overall.

I would need $85.00 for the bar. The tie rods will come with it for that price. Shipping is $36.07 for a total of $121.07

Let me know and thank you for the interest
Thomas

Do you have the tie rod bar?

[JustinGJ]

Looking for some long box lower trim, both sides, rear pieces behind the rear wheels. Also need left front fender lower front piece, tucked in next to bumper. All with black paint please, they do not need to be nice, can have dings. Going on a patina truck, '71 C20. Also looking for a pass side tail light trim and both left and right upper tailgate chrome strips, same story, do not have to be perfect at all, slightly better than scrap would match the truck fine. Thanks in advance!

[bpatrol]

do you have a 1971-72 parking brake assembly?
shipped to 79938?
thanks phillip

[esoxman308]

I'm looking for a set of tail light housings/lenses, and back up housings/lenses for 70 GMC fleetside, would you have any of these for sale??? cost shipped to ND 58740??? Thanks...Lee

[jlampka]

I have a 71 C20 and need a center grill support with all clips/screws mounting hardware but I don't see it in the photos, see it's listed for $10, could you provide photo please? Thank you!

[knomadd]

Do you still have a hood latch mechanism? The part that mounts to the grille support, not the hood itself? I'm looking for the 71-72 Chevy version specifically.

[DLTruck1973]

Originally Posted by bpatrol

do you have a 1971-72 parking brake assembly?
shipped to 79938?
thanks phillip

Sorry for the delay, I just noticed this. Are you still looking? I need to know if you need everything from the pedal to the backing plates and what trans and rear end, as well as wheel base you have? Do you need the rear cables out of the backing plates?

Let me know and I will see what we have.

Thank you.
Thomas

[DLTruck1973]

Originally Posted by knomadd

Do you still have a hood latch mechanism? The part that mounts to the grille support, not the hood itself? I'm looking for the 71-72 Chevy version specifically.

Hi Duane,

Yes, I have one, very nice, glass beaded with good springs. Ready for your finish. $30.00 plus $15.00 to ship as long as it is with in the US.

Let me know. I can post photos if needed. You will not be disappointed.

Let me know.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by esoxman308

I'm looking for a set of tail light housings/lenses, and back up housings/lenses for 70 GMC fleetside, would you have any of these for sale??? cost shipped to ND 58740??? Thanks...Lee

Hi Lee,

Very sorry for the delay. Let me know if still interested. I should be able to help you.

Thank you,
Thomas

[dozerbill72]

Do you still have the rear u-bolts and retaining plates? Also looking for a manual steering column.
Thanks,,,Bill

[knomadd]

Thomas, I'll take the hood latch for $45 shipped. If you PM me your paypal info I'll send you some money.
Thanks!

[DLTruck1973]

Originally Posted by knomadd

Thomas, I'll take the hood latch for $45 shipped. If you PM me your paypal info I'll send you some money.
Thanks!

PM on the way with payment information.

Thank you,
Thomas