What Are These Seat Runners From? - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ironhorse** · 10-09-2018, 05:09 PM

Really wet and rainy out, over 5 1/2'' since Saturday morning. Still light rain so not much going on outside today for sure. Bored and thought would ask if anyone recognizes these seat track runners. Got them in a box with a bunch of '69 Chevy parts. Seat tracks yes, but from what? Track measures 14'' and the slide section is 12''. 3 distinct positions for the slide/catch. Taller mount stud is 2 3/4'' x 5/16 dia. and shorter is 3/4'' x 5/16 dia. Stamped on the adjustment handle with the letter " A " with an inverted V upside down along side, both under scored with a line. #s 1411 stamped just below and to the right of that. Anyone have some thoughts as to what they came from?

**Grumpy old man** · 10-09-2018, 05:27 PM

They look like 65-68 RUSTANG ,

https://www.cjponyparts.com/seat-tra...SABEgJB0PD_BwE

**Ironhorse** · 10-10-2018, 09:50 PM

Grumpy, they do look very similar but looking closer at the tracks in the link the studs appear to be same length. The studs on the tracks I have are much shorter at one end and do not have the smaller diameter non threaded tip at the end of the stud. My neighbor has a 68 Mustang convertible he is restoring, will check these tracks against the bucket seats he has installed.

10-09-2018, 05:09 PM	#1
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,008	What Are These Seat Runners From? Really wet and rainy out, over 5 1/2'' since Saturday morning. Still light rain so not much going on outside today for sure. Bored and thought would ask if anyone recognizes these seat track runners. Got them in a box with a bunch of '69 Chevy parts. Seat tracks yes, but from what? Track measures 14'' and the slide section is 12''. 3 distinct positions for the slide/catch. Taller mount stud is 2 3/4'' x 5/16 dia. and shorter is 3/4'' x 5/16 dia. Stamped on the adjustment handle with the letter " A " with an inverted V upside down along side, both under scored with a line. #s 1411 stamped just below and to the right of that. Anyone have some thoughts as to what they came from? Attached Images __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks

10-09-2018, 05:27 PM	#2
Grumpy old man Senior Member Join Date: Dec 2013 Location: Gods country East,Tn Posts: 8,545	Re: What Are These Seat Runners From? They look like 65-68 RUSTANG , https://www.cjponyparts.com/seat-tra...SABEgJB0PD_BwE __________________ 1967 Factory short bed - Old school '71 - 350 / 4bolt / 487 heads / Edelbrock C3BX Muncie M-22 4 speed / Hurst Comp plus Factory 12 bolt posi 3.73 / 255-70-15 Smoothed firewall / Factory cowl induction Power disc brakes / power steering / 3.5-5" drop

10-10-2018, 09:50 PM	#3
Ironhorse Senior Member Join Date: Jul 2001 Location: Wellington, Ks Posts: 10,008	Re: What Are These Seat Runners From? Grumpy, they do look very similar but looking closer at the tracks in the link the studs appear to be same length. The studs on the tracks I have are much shorter at one end and do not have the smaller diameter non threaded tip at the end of the stud. My neighbor has a 68 Mustang convertible he is restoring, will check these tracks against the bucket seats he has installed. __________________ 1971 Chevy 1/2T 4x4 LWB 350 V-8 Was sm465-now 350TH/np205 Tilt, Tach, Towhooks Original Truck AM/FM Wellington, Ks



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.