Header Solution - Page 13 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

ffk · 04-27-2012, 08:29 PM

hey do u have any photos

Quote:

Originally Posted by passthebuck

Update: I'm back & just got my stainless 1 5/8 sbc headers installed. Having a 67 with the wide framerails, I had to relieve it in a few spots. Nbd there. I used Stage 8 hardware. There were a few other spots of interference. My motor uses a factory long, high torque starter and I had to dimple one tube a bit to allow an airgap. I also had to bend/massage a few brake lines. Overall, they fit great and look even better. I'm using 1st gen Trick Flow Twisted Wedge heads with angled plugs and I'm able to use 90 deg plug boots. I'm doing a 3sp to auto conversion & so I built my own trans crossmember.

RockTonka · 05-20-2012, 01:03 PM

Updates? Group buys? Looking for BBC...bare/coated/SS...depending on price.

**passthebuck** · 05-22-2012, 01:02 AM

Poor photos, but you get the idea. More to follow later on.

dznucks · 05-31-2012, 08:33 AM

I am in for a group buy on SBC headers.

**passthebuck** · 06-10-2012, 12:15 AM

1x As requested

**passthebuck** · 06-10-2012, 12:17 AM

2x As requested.
I have to apologize for being so late with these pics dznucks. As you can see, I have plenty of bell housing clearance with my 700R4.

Littletony · 12-11-2012, 01:54 PM

Did you ever make a set for us 3 pedal guys?

dznucks · 12-11-2012, 02:44 PM

I did order a set of these for my SBC. They fit great and the quality is unmatched in the current header market. It did take an extremely long time to for them to process my order, over 4 months due to thier machinery breaking down and my order repeatedly getting pushed to the bottom of the pile. From what I understand its a small shop and they do more than just headers. Nice folks, until you start pressuring them to meet their commiments.

They also fit perfectly around a T-56 in case anyone was wondering. I had mine coated locally.

Here are some pics. http://67-72chevytrucks.com/vboard/s...d.php?t=548617

Bennett68C10 · 04-07-2013, 12:00 AM

What is the current price of the BBC headers in mild steel with the 3" ball and socket collectors. Thanks.
Posted via Mobile Device

05-20-2012, 01:03 PM	#302
RockTonka Registered User Join Date: Jun 2010 Location: Oklahoma City, OK Posts: 1,510	Re: Header Solution Updates? Group buys? Looking for BBC...bare/coated/SS...depending on price. __________________ 1958 Chevy 1 ton dually 4X4 dump/flat bed My build thread 1966 "Not-So-Original" Chevy Custom Trim Suburban My Time-Killing Project Truck 1966 GMC Extended cab 1 1/4 ton 4X4 My Son's build thread

05-22-2012, 01:02 AM	#303
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: Header Solution Poor photos, but you get the idea. More to follow later on. Attached Images __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

05-31-2012, 08:33 AM	#304
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Header Solution I am in for a group buy on SBC headers.

06-10-2012, 12:15 AM	#305
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: Header Solution 1x As requested Attached Images __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

06-10-2012, 12:17 AM	#306
passthebuck Sisyphus was my mentor! Join Date: Sep 2002 Location: Carleton Place, Ontario CANADA Posts: 984	Re: Header Solution 2x As requested. I have to apologize for being so late with these pics dznucks. As you can see, I have plenty of bell housing clearance with my 700R4. Attached Images __________________ passthebuck #5642 -TWO 1967 GMC 910's. One with L6/3-on-the tree and the other with 355 w/435hp & a 700r4. -a 2013 Honda Civic as my "sensible" car

12-11-2012, 01:54 PM	#307
Littletony Registered User Join Date: Sep 2010 Location: Jacksonville, NC Posts: 596	Re: Header Solution Did you ever make a set for us 3 pedal guys? __________________ "Some people spend an entire lifetime wondering if they've made a difference. The Marines don't have that problem." President Ronald Reagan,1985 "The Marines I have seen around the world have the cleanest bodies, the filthiest minds, the highest morale, and the lowest morals of any group of animals I have ever seen. Thank God for the United States Marine Corps!" ..............Eleanor Roosevelt, 1945

12-11-2012, 02:44 PM	#308
dznucks Registered User Join Date: Feb 2006 Location: Smyrna, Ga Posts: 1,647	Re: Header Solution I did order a set of these for my SBC. They fit great and the quality is unmatched in the current header market. It did take an extremely long time to for them to process my order, over 4 months due to thier machinery breaking down and my order repeatedly getting pushed to the bottom of the pile. From what I understand its a small shop and they do more than just headers. Nice folks, until you start pressuring them to meet their commiments. They also fit perfectly around a T-56 in case anyone was wondering. I had mine coated locally. Here are some pics. http://67-72chevytrucks.com/vboard/s...d.php?t=548617 Last edited by dznucks; 12-11-2012 at 02:51 PM.

04-07-2013, 12:00 AM	#309
Bennett68C10 Registered User Join Date: Dec 2006 Location: Toms River, NJ Posts: 5,518	Re: Header Solution What is the current price of the BBC headers in mild steel with the 3" ball and socket collectors. Thanks. Posted via Mobile Device __________________ Keith 66 Suburban Burb Build Thread: http://67-72chevytrucks.com/vboard/s...d.php?t=751361 IG: bennett68c10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.