The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > General Truck Forums > Engine & Drivetrain > LSx Swaps

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 07-17-2015, 07:26 PM   #1
rickcdewitt
Registered User
 
rickcdewitt's Avatar
 
Join Date: Jan 2011
Location: Northern CA
Posts: 163
99-00 6.0l flywheel gm# 12561757(nv4500) not available?aftermarket options?

i'm having a hard time finding a flywheel for my 2000 6.0l/nv4500 combo. i think its gm#12561757(discontinued) but i could be wrong. any ideas or options? hopefully a short crankshaft install isn't the only option.
rickcdewitt is offline   Reply With Quote
Old 07-17-2015, 08:05 PM   #2
rickcdewitt
Registered User
 
rickcdewitt's Avatar
 
Join Date: Jan 2011
Location: Northern CA
Posts: 163
Re: 99-00 6.0l flywheel gm# 12561757(nv4500) not available?aftermarket options?

ah ha! maybe? sachs pn# W0133-1688543? anyone have experience with the ol' iron head 6.0l (long crank)? i'm not too confident seeing as discount auto parts on ebay says this will also fit a 6.5. guess i'll look it up a few other places.
rickcdewitt is offline   Reply With Quote
Old 07-17-2015, 08:33 PM   #3
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,557
Re: 99-00 6.0l flywheel gm# 12561757(nv4500) not available?aftermarket options?

The chevy 6.5 is a diesel engine,, I don't know if it will fit your early 6.0 or not..the dealership should be able to cross reference part numbers for you..I think the iron head 6.0 and the 4.8 carry the same flywheel..everybody told me to shy away from the iron head 6.0 and go with the aluminum head version..so that's what I did
mongocanfly is offline   Reply With Quote
Old 07-17-2015, 08:46 PM   #4
rickcdewitt
Registered User
 
rickcdewitt's Avatar
 
Join Date: Jan 2011
Location: Northern CA
Posts: 163
Re: 99-00 6.0l flywheel gm# 12561757(nv4500) not available?aftermarket options?

Quote:
Originally Posted by mongocanfly View Post
The chevy 6.5 is a diesel engine,, I don't know if it will fit your early 6.0 or not.
thats what i'm skeptical about.some computer geek messed up the listing but i don't think i have a lot of options other than seeing if it will fit the ls.anyway the whole truck was 500$ from a friend since he accidentally did some extreme bodywork to the cab with his excavator
rickcdewitt is offline   Reply With Quote
Old 07-17-2015, 09:12 PM   #5
rickcdewitt
Registered User
 
rickcdewitt's Avatar
 
Join Date: Jan 2011
Location: Northern CA
Posts: 163
Re: 99-00 6.0l flywheel gm# 12561757(nv4500) not available?aftermarket options?

hmm it gets deeper, it seems theres a single mass flywheel conversion for the 6.5 i wonder if thats related somehow? arggg!
rickcdewitt is offline   Reply With Quote
Old 07-26-2015, 11:17 PM   #6
rickcdewitt
Registered User
 
rickcdewitt's Avatar
 
Join Date: Jan 2011
Location: Northern CA
Posts: 163
Re: 99-00 6.0l flywheel gm# 12561757(nv4500) not available?aftermarket options?

i ordered the above mentioned sachs flywheel i'll see soon enough if its for an early lsx
rickcdewitt is offline   Reply With Quote
Old 07-26-2015, 11:46 PM   #7
solidaxel
Registered User
 
solidaxel's Avatar
 
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
Re: 99-00 6.0l flywheel gm# 12561757(nv4500) not available?aftermarket options?

Watching!
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD)
53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25
55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73
62 Solidaxle Corvette Roman Red (327
340hp 4spd 3:36) C4 & C5 suspension tube chassis
LS 3 4L70E
65 Corvette Coupe 327 350hp 4spd 4:11
78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42
2000 S-Type 3.0 (wife cruiser)
2003 GMC SCSB 5.3 4L60E 3:42
solidaxel is offline   Reply With Quote
Old 07-30-2015, 07:08 PM   #8
rickcdewitt
Registered User
 
rickcdewitt's Avatar
 
Join Date: Jan 2011
Location: Northern CA
Posts: 163
Re: 99-00 6.0l flywheel gm# 12561757(nv4500) not available?aftermarket options?

so the sachs flywheel is a misrepresentation of the nfw 1043 for a 6.5l. i've ordered it from two different places and got the same thing with one place sending me two for good measure. i wound up ordering one used from a wrecking yard,hopefully that won't have gremlins of its own.
rickcdewitt is offline   Reply With Quote
Old 07-30-2015, 11:36 PM   #9
crazy longhorn
Fabricate till you "puke"
 
Join Date: Jun 2002
Location: Ill
Posts: 9,403
Re: 99-00 6.0l flywheel gm# 12561757(nv4500) not available?aftermarket options?

1050 Sachs, 4.8/6.0....its on a 5.3, but the 5.3 was never listed with a stick trans? If you really plan to rev it...Mcleod lists a billet wheel, tad pricey, but it will bolt the gen I clutch, with no mods On my app, I went with the gen I clutch, but had to ream 3 holes on the clutch hat to fit. The sachs wheel, takes the ls-1 metric bolts, & wheras it is pinned for location on the hat, you can use the 3 larger holes to locate, the ream the 3 smaller bolts to spec. I can buzz mine to 6000 +, & she don't vibe....longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
crazy longhorn is offline   Reply With Quote
Old 07-31-2015, 01:11 AM   #10
rickcdewitt
Registered User
 
rickcdewitt's Avatar
 
Join Date: Jan 2011
Location: Northern CA
Posts: 163
Re: 99-00 6.0l flywheel gm# 12561757(nv4500) not available?aftermarket options?

i wish i could use a later model flywheel for the motors with the crank almost flush with the seal. but unfortunately 99-00 m/t motors have .400 more crank stickout from the rear of the block compared to the 5.3's(a/t) and later engines. i'll probably get a later engine or crank when its time to rebuild.
rickcdewitt is offline   Reply With Quote
Old 07-31-2015, 08:51 AM   #11
solidaxel
Registered User
 
solidaxel's Avatar
 
Join Date: Dec 2002
Location: Cactus Patch So. Az
Posts: 4,749
Re: 99-00 6.0l flywheel gm# 12561757(nv4500) not available?aftermarket options?

Quote:
Originally Posted by rickcdewitt View Post
so the sachs flywheel is a misrepresentation of the nfw 1043 for a 6.5l. i've ordered it from two different places and got the same thing with one place sending me two for good measure. i wound up ordering one used from a wrecking yard,hopefully that won't have gremlins of its own.
Thanks for that info.
Let us know how it works for you
__________________
53 TuTone Extended Cab 350 4-Spd 3:08 (SOLD)
53 Chevy Moldy pearl green ZZ-4 4L60E 9" 3:25
55 GMC 1st Black Mll (ZZ4) ZZ6 TKO 600 5 sp 3:73
62 Solidaxle Corvette Roman Red (327
340hp 4spd 3:36) C4 & C5 suspension tube chassis
LS 3 4L70E
65 Corvette Coupe 327 350hp 4spd 4:11
78 Black Silverado SWB (350/350) 5.3 & 4L60E 3:42
2000 S-Type 3.0 (wife cruiser)
2003 GMC SCSB 5.3 4L60E 3:42
solidaxel is offline   Reply With Quote
Old 08-01-2015, 10:47 PM   #12
crazy longhorn
Fabricate till you "puke"
 
Join Date: Jun 2002
Location: Ill
Posts: 9,403
Re: 99-00 6.0l flywheel gm# 12561757(nv4500) not available?aftermarket options?

Quote:
Originally Posted by rickcdewitt View Post
i wish i could use a later model flywheel for the motors with the crank almost flush with the seal. but unfortunately 99-00 m/t motors have .400 more crank stickout from the rear of the block compared to the 5.3's(a/t) and later engines. i'll probably get a later engine or crank when its time to rebuild.
I am new to the LS crowd, but just a thought....will the ls 1 wheel fit the early long crank truck engines? It is .400 thinner than the truck wheel? There was a bit of confusion on the fit on the truck flywheel (Oriellys auto)....I told the gal, sell it to me (57 bones)....if it don't measure up, I will bring it back Yes, I did see that the 99-00, some had the long crank....not sure where it would put your starter gear, or clutch differences, but the ls 1 flywheel is .400 thinner than the truck pc? longhorn
__________________
69 longhorn,4" chop,3/5 drop, 1/2 ton suspension/disc brakes,1 1/2" body drop,steel tilt clip, 5.3/Edelbrock rpm intake/600 carb, Hooker streetrod shorties,2 1/2" exhaust/ H pipe/50's Flows , 6 spd Richmond trans,12 bolt/ 3.40 gears....
crazy longhorn is offline   Reply With Quote
Old 08-01-2015, 11:38 PM   #13
rickcdewitt
Registered User
 
rickcdewitt's Avatar
 
Join Date: Jan 2011
Location: Northern CA
Posts: 163
Re: 99-00 6.0l flywheel gm# 12561757(nv4500) not available?aftermarket options?

thanks for the food for thought!
rickcdewitt is offline   Reply With Quote
Reply

Bookmarks

Thread Tools
Display Modes

Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 01:07 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com