For Sale: Billet Aluminum Dash Panels - Page 7 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

weircc · 02-28-2009, 11:28 PM

so what the status of these can i still get one or what?

Critter · 03-14-2009, 01:35 AM

Quote:

Originally Posted by weircc

so what the status of these can i still get one or what?

ME TOO! I just found this thread, you are building exactly what I have been wanting (2x5in with 5x2-1/16in).

Ryan Hubbard · 03-15-2009, 08:58 PM

Yes I am still making the dash panels. Currently I just sold my last one that has two 5" holes with five 2 1/16" holes to weircc but I can do another run. It will take me a couple weeks because I do this on the side and my machines are booked right now. But I still have them available and I have a couple different setups now.

Chevy_Man · 03-15-2009, 10:31 PM

What are your different set ups?

Eric

Ryan Hubbard · 03-16-2009, 02:52 AM

My original set up was for VDO gauges which were two 3 3/16" holes and five 2 1/16" which is what is installed in my truck. I also made the dash with the two 5" holes and five 2 1/16 holes and I made the dash with two 5" holes and one 3 3/16" hole in the center and four 2 1/16" holes. I also have billet glove box doors to match the panel.

weircc · 03-18-2009, 03:16 PM

got mine in today this is super super nice thanks highly recommend guys if you wanna set your truck from the rest.

Deuce · 04-04-2009, 09:45 AM

Can you do one with ONLY (2) 5 1/4" holes..........nothing else.

shawn57nomad · 04-05-2009, 03:54 PM

Whoa! I gotta have one of these.....

Ryan Hubbard · 04-13-2009, 11:56 PM

Deuce,

I can do one with two big holes for just two gauges.

ctrow · 04-21-2009, 06:10 PM

All,

I have the (2) 5" and (4) 2 1/8" version. I've had a difficult time finding guages in the 5" size that I liked.

I found that Classic Instruments makes them in some of their product lines. If anyone is looking for an alternative to the Autometers I'd recommend checking them out.

I'm on a budget like everyone else so I have not bought them yet. Just know that's what I'll be getting. I'm going with the gray/silver style. Not sure if I'm polishing/leaving brushed/or combination yet on the gauge cluster and glove box door. When I finish it some day I'll post pics.

woodwright · 04-21-2009, 10:48 PM

I would like to have one with no holes. Would that be more expensive?

Can you relist the website these are on for the guys just finding this thread? I think it was back a few pages.

Deuce · 05-05-2009, 12:42 AM

Quote:

Originally Posted by Ryan Hubbard

Deuce,

I can do one with two big holes for just two gauges.

Here is what I'm looking for Ryan.

I have moved the 2 holes (5 1/4") in towards the middle and down, so I could see them better with the steering wheel tilted down.

Soo we are straight.................I would like a bezel with these 2 holes at 5 1/4" diameter and the mounting holes to mount the bezel to the trucks dash. NO headlight or washer/wiper provisions.Mounting these under the dash.

Can you do it?? Can you make the holes in the same location (more or less) as the pics???

If you can do it I will ask classicchev to paypal you the money when you are ready.

Thanks.

basemodel67 · 05-06-2009, 12:15 PM

Hey - Do you make these for 67-68? Also, could you make hole for starter button?

02-28-2009, 11:28 PM	#151
weircc Registered User Join Date: Dec 2008 Location: richmond, MO Posts: 794	Re: For Sale: Billet Aluminum Dash Panels so what the status of these can i still get one or what?

03-15-2009, 08:58 PM	#153
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: For Sale: Billet Aluminum Dash Panels Yes I am still making the dash panels. Currently I just sold my last one that has two 5" holes with five 2 1/16" holes to weircc but I can do another run. It will take me a couple weeks because I do this on the side and my machines are booked right now. But I still have them available and I have a couple different setups now.

03-15-2009, 10:31 PM	#154
Chevy_Man Tightwad Join Date: Jun 2005 Location: Louisiana Posts: 408	Re: For Sale: Billet Aluminum Dash Panels What are your different set ups? Eric __________________ 56 Chevy custom cab step side under construction 55 Chevy 210 68 SWB Stepside back burner under construction 72 Chevy LWB 84 CJ 7 05 Chevy 1500 Crew Cab 30X40 DOGHOUSE(shop) with many add ons

03-16-2009, 02:52 AM	#155
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: For Sale: Billet Aluminum Dash Panels My original set up was for VDO gauges which were two 3 3/16" holes and five 2 1/16" which is what is installed in my truck. I also made the dash with the two 5" holes and five 2 1/16 holes and I made the dash with two 5" holes and one 3 3/16" hole in the center and four 2 1/16" holes. I also have billet glove box doors to match the panel.

03-18-2009, 03:16 PM	#156
weircc Registered User Join Date: Dec 2008 Location: richmond, MO Posts: 794	Re: For Sale: Billet Aluminum Dash Panels got mine in today this is super super nice thanks highly recommend guys if you wanna set your truck from the rest.

04-04-2009, 09:45 AM	#157
Deuce Registered User Join Date: Apr 2004 Location: Calgary, Alberta,Canada Posts: 1,595	Re: For Sale: Billet Aluminum Dash Panels Can you do one with ONLY (2) 5 1/4" holes..........nothing else. __________________ I know what your thinking.......I have ESPN. Sometimes it's easier to do things the hard way. Fesler Built 1968 Chevy C10....Must resist the urge to mess with it!!

04-05-2009, 03:54 PM	#158
shawn57nomad Registered User Join Date: Apr 2007 Location: Newton, IA Posts: 173	Re: For Sale: Billet Aluminum Dash Panels Whoa! I gotta have one of these..... __________________ FAST cars don't make power to the front wheels, THEY LIFT 'EM!

04-13-2009, 11:56 PM	#159
Ryan Hubbard Registered User Join Date: Aug 2007 Location: Mission Viejo, CA Posts: 288	Re: For Sale: Billet Aluminum Dash Panels Deuce, I can do one with two big holes for just two gauges.

04-21-2009, 06:10 PM	#160
ctrow New Member Join Date: May 2007 Location: OKC Posts: 204	Re: For Sale: Billet Aluminum Dash Panels All, I have the (2) 5" and (4) 2 1/8" version. I've had a difficult time finding guages in the 5" size that I liked. I found that Classic Instruments makes them in some of their product lines. If anyone is looking for an alternative to the Autometers I'd recommend checking them out. I'm on a budget like everyone else so I have not bought them yet. Just know that's what I'll be getting. I'm going with the gray/silver style. Not sure if I'm polishing/leaving brushed/or combination yet on the gauge cluster and glove box door. When I finish it some day I'll post pics. Attached Images

04-21-2009, 10:48 PM	#161
woodwright Enjoying left field Join Date: Jun 2008 Location: Dillon Montana Posts: 900	Re: For Sale: Billet Aluminum Dash Panels I would like to have one with no holes. Would that be more expensive? Can you relist the website these are on for the guys just finding this thread? I think it was back a few pages. __________________ Clint 70 Chevy 4WD "Ultimate Work Truck" SOLD Last edited by woodwright; 04-21-2009 at 10:50 PM.

05-06-2009, 12:15 PM	#163
basemodel67 Factory Strippers Rule! Join Date: Mar 2009 Location: Shingle Springs, CA Posts: 707	Re: For Sale: Billet Aluminum Dash Panels Hey - Do you make these for 67-68? Also, could you make hole for starter button?



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.