OR Parting 1986 Suburban K20 4x4

[DLTruck1973]

Originally Posted by 1985-GMC

The one I'm talking about is definitely off a suburban with rear A/C. It's in the top picture on the far left with the high pressure port. It has a Y for the liquid line to split off and go to the rear and suburbans are the only ones that had that.

This is the one you need, correct? I need $25.00 plus shipping which will be $17.00 so $42.00 total.

I stand corrected, the truck is a 1991 Suburban with rear air.

Let me know and I can PM you payment information.

Thank you for the interest,
Thomas

[1985-GMC]

If you can get that other line off of it I'll take it. A propane torch and some penetrating oil should do the trick if it's being stubborn. If it won't come off it won't do me much good. Thanks Thomas!

Tony

[DLTruck1973]

Originally Posted by 1985-GMC

If you can get that other line off of it I'll take it. A propane torch and some penetrating oil should do the trick if it's being stubborn. If it won't come off it won't do me much good. Thanks Thomas!

Tony

Hi Tony,

I have you covered. The other line came out just fine. No special tools or heat needed.

I will send you a PM with payment information.

Thank you,
Thomas

[billlopez]

I'm looking for the wiper delay bracket that bolts to the underside of the steering column under the dash. Thank you.

[DLTruck1973]

Originally Posted by billlopez

I'm looking for the wiper delay bracket that bolts to the underside of the steering column under the dash. Thank you.

This one?

I can get it to you for $15.00 shipped if interested. I can give it a quick glass bead also.

Let me know,

Thank you,
Thomas

[whytry85]

Good fender to cab seals?

[billlopez]

Originally Posted by DLTruck1973

This one?

I can get it to you for $15.00 shipped if interested. I can give it a quick glass bead also.

Let me know,

Thank you,
Thomas

Yes, that is it. I would like to get it. You take money orders? Thank you.

[DLTruck1973]

Originally Posted by billlopez

Yes, that is it. I would like to get it. You take money orders? Thank you.

Yes we take money orders. I will send you a PM with the address.

Thank you,
Thomas

[72ChevySS]

Do you have the air distribution duct/vent that is located under the center of the dash directly in front of the hump? if so please send pics and ship quote to 87124. Thanks in advance!

[LuvNLife]

I've got an 87 GMC R1500 2WD short bed, with 350 and 700R. I need these parts:

Double-hump transmission crossmember for true dual exhaust, and,

Set of 4 front bumper brackets.

If you could let me know price and availability, I'd appreciate it. Shipping would be to zip 20169, Haymarket, VA.

Jerry

[DLTruck1973]

Originally Posted by 72ChevySS

Do you have the air distribution duct/vent that is located under the center of the dash directly in front of the hump? if so please send pics and ship quote to 87124. Thanks in advance!

This one? I can sell for $15.00 plus $13.00 to ship so $28.00 total.

Let me know and I will send you payment information.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by LuvNLife

I've got an 87 GMC R1500 2WD short bed, with 350 and 700R. I need these parts:

Double-hump transmission cross member for true dual exhaust, and,

Set of 4 front bumper brackets.

If you could let me know price and availability, I'd appreciate it. Shipping would be to zip 20169, Haymarket, VA.

Jerry

Here you go,

I have the complete set of front bumper brackets for $50.00 plus shipping.

For the cross member, the only 81 and up version of that "double hump" is for a 4x4. I do not believe it to work on a 2wd truck. I do have it for the 4x4 and it is $65.00 plus shipping if you are interested but you would need to do some research to see if it would work.

Let me know,
Thank you,
Thomas

[Wgesnerjr]

Wanted to know if the Suburban was a Fuel Injected unit. I am looking for all the wiring (bulkhead connector to tank) and the plugs (both sides) for the fuel sending unit. I am putting fuel injection into a carb chassis and need to add this plug to my unit as I am putting a pump in the tank.

Please let me know if you have these and how much with shipping to Atlanta 30044.

Thanks,
Jay

[72ChevySS]

Originally Posted by DLTruck1973

This one? I can sell for $15.00 plus $13.00 to ship so $28.00 total.

Let me know and I will send you payment information.

Thank you,
Thomas

Posted via Mobile Device

[whytry85]

Originally Posted by whytry85

any good fender to cab seals?

....?

[DLTruck1973]

Originally Posted by whytry85

....?

I will have to check for you on Monday.

I will let you know, thank you,
Thomas

[Krex]

I am looking for all brake parts knuckles out from a front Dana 44 what do you have shipped to 75023

[aotte1]

Need
1). two Silverado Kick panels for 1986 C10, prefer black but will consider other colors too.

2). 1984 to 87 dash bezel non A/C preferred, will consider A/C one also.

Would like in very good to excellent condition please.

Got a bunch of stuff a while back, did I deal with John then?

Thanks,
Les

[aotte1]

Follow-up on dash bezel will send you photo of needed one later today.

Also need outer seat belt bolt escussion cover where it bolts to floor.
Photo attached. Mine has attaching tab broken.

Les

[DLTruck1973]

Originally Posted by whytry85

....?

The only set I have readily available are on an 85 pick up cab which should be the same.

I will need $20.00 for the pair plus the shipping which I could do for $13.00 so $33.00 total.

Let me know.

Thank you,
Thomas

[DLTruck1973]

Originally Posted by aotte1

Need
1). two Silverado Kick panels for 1986 C10, prefer black but will consider other colors too.

2). 1984 to 87 dash bezel non A/C preferred, will consider A/C one also.

Would like in very good to excellent condition please.

Got a bunch of stuff a while back, did I deal with John then?

Thanks,
Les

Hi Les,

That would have been Thomas (myself) or Tom that helped you before but probably me.

No on the kick panels . I have nothing in any color that is in great condition at this time.

I do have a 84-87 non AC bezel but it does have some chrome wear off around the gauge holes. I would need $50.00 but it is not perfect.

Let me know,
Thank you,
Thomas

[aotte1]

Thomas,
Dash bezel- Is it easy to post a photo please. Is it in good condition except for the missing chrome? Looking for a nice one to match the other dash insert piece I received from you.

Also need the two sway bar brackets that are riveted to the frame for my 86' truck, they are kind of odd/ angle shaped, non semetrical.

Anything on the outer floor seat belt cover- photo above?

Les

[whytry85]

Originally Posted by DLTruck1973

The only set I have readily available are on an 85 pick up cab which should be the same.

I will need $20.00 for the pair plus the shipping which I could do for $13.00 so $33.00 total.

Let me know.

Thank you,
Thomas

I'll take em. Let know how you want payment sent. Thanks!

[Hart_Rod]

Do you have a good used chrome sport bumper and brackets for 86 SWB?

[DLTruck1973]

Originally Posted by whytry85

I'll take em. Let know how you want payment sent. Thanks!

I will send you a PM with payment information.

Thank you,
Thomas