Changing from Auto floor to column shifter - The 1947 - Present Chevrolet & GMC Truck Message Board Network

cgster · 01-13-2019, 03:57 PM

I bought a 72 truck that has an auto B&M floor shift in it. I'd really like to get a automatic column and move to column shift. My question is, how hard would this be to do? Would it just require the auto shift column and a lokar transmission linkage rod kit to make this happen or is there more things needed?

**Smitty** · 01-13-2019, 07:43 PM

Pretty sure you are correct. Column and Lokar linkage would do it. Or you could find someone selling the stock bellcrank and linkage and use that. Which is the way I went when converting from 3 speed to automatic.

my67c20 · 01-14-2019, 06:05 PM

Having basically completed this with my manual to auto trans swap, I would have to second what you are thinking is required. Not sure what you have for a neutral safety switch, but that might be needed as well.

**Smitty** · 01-14-2019, 09:48 PM

Used stock neutral safety switch with auto column. This was when I switched from 3-speed to the 700r4.

**Smitty** · 01-14-2019, 10:28 PM

Used stock neutral safety switch with auto column. This was when I switched from 3-speed to the 700r4.

chevyman196669 · 01-14-2019, 11:32 PM

i just did this same swap last month on my 69 i went from 3 speed to an auto and bought cpp steering column and a lokar kit but i will tell you you will need the longer 26 in rod that lokar sells separate for 16 bucks at summit and trim about 1 in to 2 in off.and it was so simple i would do it again

01-13-2019, 03:57 PM	#1
cgster Registered User Join Date: Aug 2015 Location: Texas Posts: 324	Changing from Auto floor to column shifter I bought a 72 truck that has an auto B&M floor shift in it. I'd really like to get a automatic column and move to column shift. My question is, how hard would this be to do? Would it just require the auto shift column and a lokar transmission linkage rod kit to make this happen or is there more things needed?

01-13-2019, 07:43 PM	#2
Smitty Senior Member Join Date: Dec 1999 Location: Spring Valley, Ca. Posts: 1,100	Re: Changing from Auto floor to column shifter Pretty sure you are correct. Column and Lokar linkage would do it. Or you could find someone selling the stock bellcrank and linkage and use that. Which is the way I went when converting from 3 speed to automatic. __________________ Smitty '71 Short Fleetside Spring Valley, Ca.

01-14-2019, 06:05 PM	#3
my67c20 Registered User Join Date: Jun 2002 Location: Tucson AZ by way of WI & CA Posts: 507	Re: Changing from Auto floor to column shifter Having basically completed this with my manual to auto trans swap, I would have to second what you are thinking is required. Not sure what you have for a neutral safety switch, but that might be needed as well.

01-14-2019, 09:48 PM	#4
Smitty Senior Member Join Date: Dec 1999 Location: Spring Valley, Ca. Posts: 1,100	Re: Changing from Auto floor to column shifter Used stock neutral safety switch with auto column. This was when I switched from 3-speed to the 700r4. __________________ Smitty '71 Short Fleetside Spring Valley, Ca.

01-14-2019, 10:28 PM	#5
Smitty Senior Member Join Date: Dec 1999 Location: Spring Valley, Ca. Posts: 1,100	Re: Changing from Auto floor to column shifter Used stock neutral safety switch with auto column. This was when I switched from 3-speed to the 700r4. __________________ Smitty '71 Short Fleetside Spring Valley, Ca.

01-14-2019, 11:32 PM	#6
chevyman196669 Registered User Join Date: Sep 2012 Location: grand prairie tx Posts: 2	Re: Changing from Auto floor to column shifter i just did this same swap last month on my 69 i went from 3 speed to an auto and bought cpp steering column and a lokar kit but i will tell you you will need the longer 26 in rod that lokar sells separate for 16 bucks at summit and trim about 1 in to 2 in off.and it was so simple i would do it again



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.