Quote:
Originally Posted by Modges'66
Dude!
Ultra-nice work!
how are you cutting the shtuff from plate? with a plasma, or having it laser cut?
Hopefully you are not doing it by hand, but real kudo's if you are.
|
Thanks! I cut the bag crossmember plate by hand. I used a 3" hole saw and a 4 1"2 cutoff blade in a grinder. After the holes were drilled I used 2" and 3" rolocs to grind the radius. The 4 link and Watts link tabs were laser cut cause they came in kits but I did all the fitment to the tubes by hand. You'd be surprised what you can do with good hole saws and good quality abrasives.
Posted via Mobile Device