GMC paul door seals are great!

[BugzC10]

Originally Posted by GMCPaul

Redesigned from the ground up for the 67-72 truck specifically. Which include mitered corner for improved look, bulbous seal profile redesigned and a softer compound used for it's construction for easier door closure, slightly taller base so inside lip covers same area as originals did.
Where yours are pulling loose there must either be a bind, damaged door lip they attach to or damaged gripper on the seal in that area. Pull on it to remove that section and look at wide & straight the lip is that attaches in that area and check the rubber grips inside the seal lip for damage. If both appear good try wiping that section with Armor All or similar and see what happens. If it's improved then look to see if the door latch on door or striker area on door are deformed to find what's causing the bind in that area.
Paul Jr. @ GMCPauls

Thanks for your response. It's my drivers side that is affected mostly and I believe my door fit or lack of proper adjustment is causing the issue. When I adjust the door I will upgrade to your latest seal.

[GMCPaul]

Originally Posted by BugzC10

Thanks for your response. It's my drivers side that is affected mostly and I believe my door fit or lack of proper adjustment is causing the issue. When I adjust the door I will upgrade to your latest seal.

Look for play in the door hinge pins and replace bushings & pins if worn before you try to adjust anything. They'll cause a bind at the latch area when worn.
Paul Jr @ GMCPauls

[BugzC10]

Originally Posted by GMCPaul

Look for play in the door hinge pins and replace bushings & pins if worn before you try to adjust anything. They'll cause a bind at the latch area when worn.
Paul Jr @ GMCPauls

When I refurbished my doors I rebuild the hinges, replacing the bushings and pins. I just didn't dial in the door alignment completely. I have it on the top of my all encompassing to-do list.

[GMCPaul]

Several 100 sets sold to members since the beginning of the year 2016 would love to hear your feedback? on the new design and fit
Paul Jr @ GMCPauls

[Rob C]

Originally Posted by GMCPaul

Several 100 sets sold to members since the beginning of the year 2016 would love to hear your feedback? on the new design and fit
Paul Jr @ GMCPauls

Just ordered 1 min ago..will let you know next week