AZ WTB L6 292-Only P/S Pump Brackets [MY'68] - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**'68OrangeSunshine** · 05-07-2022, 04:57 PM

Looking for power steering pump brackets for a '68 292 L6.
I'm in Tucson.

**old51sedan** · 05-08-2022, 04:40 PM

Quote:

Originally Posted by '68OrangeSunshine

Looking for power steering pump brackets for a '68 292 L6.
I'm in Tucson.

If I'm not mistaken, they changed those brackets between 1968 and 69. Is this correct?

**'68OrangeSunshine** · 05-09-2022, 05:42 AM

Can't really say.
But the blocks I have are '67, '63, and '68. So those are the end users.
Don't know if '69 and later are different. There never were integrated heads on L25 292s. It continued as the 4.8 Liter L6, only obsolete when Vortec 4200s hit the production line.
P/S+ A/C were extremely rare on 292s, as they were mostly in work trucks.
GM never developed a 4800 Vortec.

**old51sedan** · 05-09-2022, 09:58 AM

Quote:

Originally Posted by '68OrangeSunshine

Can't really say.
But the blocks I have are '67, '63, and '68. So those are the end users.
Don't know if '69 and later are different. There never were integrated heads on L25 292s. It continued as the 4.8 Liter L6, only obsolete when Vortec 4200s hit the production line.
P/S+ A/C were extremely rare on 292s, as they were mostly in work trucks.
GM never developed a 4800 Vortec.

I'm thinking from my hunt for PS, that 69-72 was different than earlier years, but I believe that may be because of the water pump and thermostat housing. I bought a set of brackets while in FL this winter, they are still packed away somewhere in my trailer. I will post a picture of my setup, may not be able to tell much, if interested I can maybe get a better picture.

**70STOVEBOLT** · 05-09-2022, 05:40 PM

That is a very clean engine compartment!

05-07-2022, 04:57 PM	#1
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,051	WTB L6 292-Only P/S Pump Brackets [MY'68] Looking for power steering pump brackets for a '68 292 L6. I'm in Tucson. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

05-09-2022, 05:42 AM	#3
'68OrangeSunshine Senior Member Join Date: Feb 2002 Location: Tucson, AZ USA Posts: 7,051	Re: WTB L6 292-Only P/S Pump Brackets [MY'68] Can't really say. But the blocks I have are '67, '63, and '68. So those are the end users. Don't know if '69 and later are different. There never were integrated heads on L25 292s. It continued as the 4.8 Liter L6, only obsolete when Vortec 4200s hit the production line. P/S+ A/C were extremely rare on 292s, as they were mostly in work trucks. GM never developed a 4800 Vortec. __________________ Every 25 years I like to rebuild that 292, whether it needs it or not.

05-09-2022, 05:40 PM	#5
70STOVEBOLT Senior Member Join Date: Jun 2005 Location: Winona Lake, IN Posts: 6,212	Re: WTB L6 292-Only P/S Pump Brackets [MY'68] That is a very clean engine compartment! __________________ 70 C/10 SWB 402/TH400/3.73 "The Needy Beast" 200,000 Mile Club Disc Brake Club Owner installed options: Front Sway Bar Power Steering Power Brakes Cigar Lighter Courtesy Lights Deluxe Side Markers Wiper Delay Power windows Power Locks Coming soon: EFI 2015 Silverado 1500 LS 4.3/6L80/3.23



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.