|
01-27-2020, 10:22 PM
|
#1 |
|
Registered User
Join Date: Sep 2009
Location: westbank bc
Posts: 239
|
Hard steering at idle
The truck is a 84 Silverado with the 350. Just recently I find I cant turn or have to REALLY fight to turn the wheel when stopped. I figure the power steering pump is on it's way out because the fluid looks fine. What else should I replace when I'm doing the pump? Is it worth it to replace the hoses too? Any tricks or tips?
__________________
On a quite night you can hear a ford rust |
|
|
|
01-27-2020, 11:28 PM
|
#2 |
|
Registered User
Join Date: Dec 2014
Location: Euless, Texas
Posts: 510
|
Re: Hard steering at idle
If replacing pump, I would replace hoses especially if they may be original. Just a little added insurance to not worry about.
__________________
1974 Cheyenne 10 LWB Stock 350 W/HEI /TH350/AC/4 BBL Quadrajet Mopar by Birth Chevy by Choice |
|
|
|
|
01-28-2020, 06:25 AM
|
#3 |
|
Senior Member
 
Join Date: Jun 2015
Location: Atlanta, GA.
Posts: 737
|
Re: Hard steering at idle
Make sure the belt is tight. They can slip and not squeal or make noise.
__________________
Jay Gesner Atlanta, GA 1985 C10 Long Bed 4X2 LS 5.3, 4L60E Father/Daughter Project |
|
|
|
|
01-28-2020, 07:44 AM
|
#4 |
|
Registered User
Join Date: Aug 2012
Location: Oklahoma City, OK
Posts: 2,472
|
Re: Hard steering at idle
2nd the thought to check the belt. They can also slip easier when wet.
|
|
|
|
|
01-29-2020, 02:25 AM
|
#5 |
|
Registered User
Join Date: Sep 2009
Location: westbank bc
Posts: 239
|
Re: Hard steering at idle
I'll check the belt tomorrow, I did notice this after I washed the truck to park it. Thanks for the tip!
__________________
On a quite night you can hear a ford rust |
|
|
|
|
01-30-2020, 01:34 AM
|
#6 |
|
Registered User
Join Date: Sep 2009
Location: westbank bc
Posts: 239
|
Re: Hard steering at idle
So I haven't had time to look in the daylight but I did a quick check after work today and yes the belt is loose but I couldn't see how to tighten it. Anyone got any tips?
__________________
On a quite night you can hear a ford rust |
|
|
|
|
01-30-2020, 02:41 PM
|
#7 |
|
Registered User
Join Date: Jun 2014
Location: CO
Posts: 729
|
Re: Hard steering at idle
most power steering pump brackets will have a place for a 1/2 socket to fit into and help you tighten belt. Usually have to loosen two bolts to get pump to loosen up for adjustment. If you are doing by yourself just hold tension and tighten down on one bolt. Once belt is tight enough just tighten down other bolt.
__________________
79 Chevy 2wd BIG10 350 TH400 |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
