The 1947 - Present Chevrolet & GMC Truck Message Board Network







Register or Log In To remove these advertisements.

Go Back   The 1947 - Present Chevrolet & GMC Truck Message Board Network > 47 - Current classic GM Trucks > The 1960 - 1966 Chevrolet & GMC Pickups Message Board

Web 67-72chevytrucks.com


Reply
 
Thread Tools Display Modes
Old 03-27-2018, 10:51 PM   #1
jrusher
Registered User
 
Join Date: Mar 2017
Location: Edmonton
Posts: 369
Floor supports, floors and rockers

So just in the middle of an ls swap on my 65 and the more I look at my front cab floor supports and rest of rot the more I realize how bad an unsafe it is . I picked this truck up in Oklahoma last spring .
Anyways this is what I’m dealing with few pics attached . The front cab mount supports are totally gone an collapsing the rears could be patched in . Needs inner outer rockers , kick panels, floor braces, probably A pillar pieces and floor pans . The drivers side foot area rot goes up quite aways not sure if there’s patch panels for these areas ?
So thought about a complete floor but don’t really want to pull cab so I might just tackle it with cab on frame an lift one side at a time an do The floor braces. I know this is a ton of work I’ve done some floor work on my Chevelle and it wasn’t a lot of fun but now is the time to tackle this before I put me engine etc back in.
Any tips on what to tackle first would be greatly appreciated
This is what I was thinking of doing first
- a pillar patches if needed
- then front floor brace/support complete right to cab mount
- rear cab floor support
- floor pan
- kick panel
- then work back towards rockers
Attached Images
    

Last edited by jrusher; 03-27-2018 at 10:57 PM.
jrusher is offline   Reply With Quote
Old 03-27-2018, 11:00 PM   #2
jrusher
Registered User
 
Join Date: Mar 2017
Location: Edmonton
Posts: 369
Re: Floor supports, floors and rockers

Couple more pic
Attached Images
    
jrusher is offline   Reply With Quote
Old 03-27-2018, 11:21 PM   #3
mongocanfly
Post Whore

 
mongocanfly's Avatar
 
Join Date: May 2015
Location: Alabama
Posts: 14,608
Re: Floor supports, floors and rockers

with cab supports being gone I would x brace the inside of the cab making sure doors open and shut properly...then pull the cab.[what you didn't want to hear]...itll be much easier to work on .roll it over on the firewall...that's a lot of stuff that needs replaced...or maybe find another cab...you might find a nicer one cheaper than you can fix that one
__________________
Mongo...aka Greg

RIP Dad
RIP Jesse

1981 C30 LQ9 NV4500..http://67-72chevytrucks.com/vboard/s...d.php?t=753598
Mongos AD- LS3 TR6060...http://67-72chevytrucks.com/vboard/s...34#post8522334
Columbus..the 1957 IH 4x4...http://67-72chevytrucks.com/vboard/s...63#post8082563
2023 Chevy Z71..daily driver
mongocanfly is offline   Reply With Quote
Old 03-28-2018, 12:08 AM   #4
jrusher
Registered User
 
Join Date: Mar 2017
Location: Edmonton
Posts: 369
Re: Floor supports, floors and rockers

Quote:
Originally Posted by mongocanfly View Post
with cab supports being gone I would x brace the inside of the cab making sure doors open and shut properly...then pull the cab.[what you didn't want to hear]...itll be much easier to work on .roll it over on the firewall...that's a lot of stuff that needs replaced...or maybe find another cab...you might find a nicer one cheaper than you can fix that one
I’ll brace it fore sure. Finding a better cab up here is hard to come by most are rotted the same or more
jrusher is offline   Reply With Quote
Reply

Bookmarks


Posting Rules
You may not post new threads
You may not post replies
You may not post attachments
You may not edit your posts

BB code is On
Smilies are On
[IMG] code is On
HTML code is Off

Forum Jump


All times are GMT -4. The time now is 07:01 PM.


Powered by vBulletin® Version 3.8.11
Copyright ©2000 - 2024, vBulletin Solutions Inc.
Copyright 1997-2022 67-72chevytrucks.com