Register or Log In To remove these advertisements. |
|
|
|
Thread Tools | Display Modes |
01-22-2020, 06:39 PM | #1 |
Registered User
Join Date: Dec 2013
Location: N/W Mississippi 'Yall
Posts: 44
|
T-5 trans info needed please
Good afternoon guys n gals.
Got another Manual trans question for you guys. Might be doing some trading for a T-5 from a V8 Mustang as a 'Parts' trans since I have another (internally complete) T-5 from a early-mid 90's S-10. Question is, Do the internals swap out and would the Ford internals be tougher since it was from a V8 instead of just a V6, like the S-10? If not, probably not worth my time..? Projected engine will be either a hopped up .060 283, or a warmed over std 327. So nothing upwards of 400hp lol.. Pretty much all I need is a small hole bellhousing and fork for the S-10 T-5 (got some contacts. But nothing yet) Thanks E |
01-22-2020, 10:27 PM | #2 |
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,709
|
Re: T-5 trans info needed please
Ford input shafts are different lengths, spline count, and pilot diameter different than the GM trans.
You can adapt a Ford to GM and if you Google "mustang t5 c3 Corvette" you can find a lot of that info. You need to have some customer pieces and cost will go way up.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
01-23-2020, 04:52 PM | #3 |
Registered User
Join Date: Dec 2013
Location: N/W Mississippi 'Yall
Posts: 44
|
Re: T-5 trans info needed please
Thanks Mike. I'll give it a read.
....Ok, looks like it's NOT going to help me for what I'm trying to do. E Last edited by rockosocko; 01-23-2020 at 05:01 PM. |
Bookmarks |
Thread Tools | |
Display Modes | |
|
|