4.3w performance - The 1947 - Present Chevrolet & GMC Truck Message Board Network

mothertrucker424 · 04-14-2008, 12:12 AM

i have a 93 blazer 4.3 w motor (Vortec)

anyone know any preformance mods that work
its stock now
thanks

gchemist · 04-15-2008, 04:37 AM

I'm getting my PCM flashed by this company. http://www.wait4meperformance.com/

Read about the modification here.

BurnoutNova · 04-15-2008, 11:48 AM

i have a 92 S10 Blazer with the Vortec 4.3L i have another engine im going to put in it that will be rebiult (mine has 230K on it, and uses oil)

im going to use flattop pistons, and clean the ports up on the heads. the engine thats in there runs great just smokes and is a bit tired im sure, but ive never needed more power ect. i know they make headers for these Blazers, but never looked into anything else.

68C15 · 04-16-2008, 03:11 PM

the top end from a Syclone/Typhoon would really wake it up.

mothertrucker424 · 04-22-2008, 01:37 PM

any other ideas?

Myself · 04-22-2008, 08:57 PM

Headers, upgrade the cat & exhaust, K&N, 180 t-stat, convert to electric fan, chip, grind away the protruding airfoil on the throttle butterfly (if that model has one), and performance ignition.

04-14-2008, 12:12 AM	#1
mothertrucker424 Registered User Join Date: Sep 2006 Location: st pete Posts: 404	4.3w performance i have a 93 blazer 4.3 w motor (Vortec) anyone know any preformance mods that work its stock now thanks __________________ _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- 1972 K10 4"lift 33"tires (soon to be bigger and better) 2000 silverado 1500 2wd 2"coil spacers3" BL 285/75/16's

04-15-2008, 04:37 AM	#2
gchemist BAD BOW-Silverado XST Join Date: May 2000 Location: Senior Member from Austin, TX Posts: 6,431	Re: 4.3w performance I'm getting my PCM flashed by this company. http://www.wait4meperformance.com/ Read about the modification here. Last edited by gchemist; 04-15-2008 at 04:38 AM.

04-15-2008, 11:48 AM	#3
BurnoutNova Registered User Join Date: Mar 2004 Location: CA Posts: 2,057	Re: 4.3w performance i have a 92 S10 Blazer with the Vortec 4.3L i have another engine im going to put in it that will be rebiult (mine has 230K on it, and uses oil) im going to use flattop pistons, and clean the ports up on the heads. the engine thats in there runs great just smokes and is a bit tired im sure, but ive never needed more power ect. i know they make headers for these Blazers, but never looked into anything else.

04-16-2008, 03:11 PM	#4
68C15 blood type; Retumbo Join Date: Jan 2004 Location: next to my reloading bench Posts: 10,269	Re: 4.3w performance the top end from a Syclone/Typhoon would really wake it up.

04-22-2008, 01:37 PM	#5
mothertrucker424 Registered User Join Date: Sep 2006 Location: st pete Posts: 404	Re: 4.3w performance any other ideas? __________________ _-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_-_- 1972 K10 4"lift 33"tires (soon to be bigger and better) 2000 silverado 1500 2wd 2"coil spacers3" BL 285/75/16's

04-22-2008, 08:57 PM	#6
Myself Registered User Join Date: Oct 2005 Location: Northern Arkansas Posts: 1,127	Re: 4.3w performance Headers, upgrade the cat & exhaust, K&N, 180 t-stat, convert to electric fan, chip, grind away the protruding airfoil on the throttle butterfly (if that model has one), and performance ignition.



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.