MO Misc parts for sale - The 1947 - Present Chevrolet & GMC Truck Message Board Network

bobbo · 01-16-2011, 07:57 PM

Selling some smaller parts to fund the project. These are all off my 69 GMC. Replies MUST be done on this thread initially, NO PM's will be responded to if you haven't posted interest here first.

Here's what I have...

Dash Cluster with aftermarket oil, temp, volts gauges. All works. --- $40 plus shipping.

Heater Control, all new parts, switch, levers. Comes with cables but they are tight. --- $35 plus shipping.

bobbo · 01-16-2011, 08:04 PM

Edelbrock Performer RPM intake for SBC, this was on my 350. SOLD!
Edelbrock Performer 600 Carburetor - SOLD!
Edelbrock Air Cleaner - SOLD!

bobbo · 01-16-2011, 08:12 PM

Two sets of SBC Ram Horn manifolds, the first two pics are the set I had on the truck, the flanges are very rough, studs are welded into the manifolds and flange nuts are lightly welded to studs. Will take $10 plus shipping for the pair.

Second set is not matching but good condition. SOLD!

Also interested in selling the wheels, They are 16" 6 lug chrome, 8 inches wide, include center caps and tires. Firestone Destination 265/75R16. I will not ship these, will need local pick up only. $350 firm

sjarrett71 · 01-16-2011, 08:38 PM

Bobbo, would you take $100.00 for the carb and intake picked up? I can come this weekend or the following.

Cyclone44 · 01-16-2011, 08:41 PM

do you have a good ram horn for the pass side....One that the studs would come out of so new ones could be put in?....That is a great deal on that carb!!

bobbo · 01-16-2011, 08:43 PM

Quote:

Originally Posted by sjarrett71

Bobbo, would you take $100.00 for the carb and intake picked up? I can come this weekend or the following.

Absolutely. Would give you an excuse to come check out my progress. Would love to see ya again!

bobbo · 01-16-2011, 08:45 PM

Quote:

Originally Posted by Cyclone44

do you have a good ram horn for the pass side....One that the studs would come out of so new ones could be put in?....That is a great deal on that carb!!

The third picture is a passenger side. Thinking it is relatively new. I can get you some better pics if you are interested.

sjarrett71 · 01-16-2011, 08:46 PM

Quote:

Originally Posted by bobbo

Absolutely. Would give you an excuse to come check out my progress. Would love to see ya again!

Sounds great! I might just hijack you to come do mine! Looks like you're having a great time tearing everything apart!

bobbo · 01-16-2011, 08:48 PM

LOL. My gf would like that too much.

Will consider them sold then.

Let me know which weekend, I work next Saturday and am off Sunday, the following weekend I am off both days.

sjarrett71 · 01-16-2011, 08:51 PM

Lets make it the following weekend then. It would be a rush trip for this coming weekend since I work both days at my part time job.

bobbo · 01-16-2011, 08:53 PM

Awesome! Really excited.

Cyclone44 · 01-16-2011, 09:52 PM

Do you have a idea what shipping to 37918 would be?....They are kinda heavy!

bobbo · 01-16-2011, 10:01 PM

Quote:

Originally Posted by Cyclone44

Do you have a idea what shipping to 37918 would be?....They are kinda heavy!

I haven't ever shipped anything, but will find out tomorrow.

clos69 · 01-17-2011, 12:14 AM

I'll take the air cleaner if still up for grabs....pm me for payment info, thanks

kiknrocks · 01-17-2011, 04:51 AM

ill get in line for the ram horns in the second pics shipped to 95240 Thanks

bobbo · 01-17-2011, 08:34 AM

Quote:

Originally Posted by clos69

I'll take the air cleaner if still up for grabs....pm me for payment info, thanks

PM Sent...

Quote:

Originally Posted by kiknrocks

ill get in line for the ram horns in the second pics shipped to 95240 Thanks

You are next up if Cyclone44 doesn't take.

bobbo · 01-17-2011, 02:50 PM

Quote:

Originally Posted by Cyclone44

Do you have a idea what shipping to 37918 would be?....They are kinda heavy!

Looks like Fedex Ground shipping will be about $27 for the pair. I would rather not sell them individually. So $47 shipped.

clos69 · 01-17-2011, 05:09 PM

Robert...PP has been sent for the air cleaner,thanks Carlos

bobbo · 01-17-2011, 06:55 PM

Quote:

Originally Posted by clos69

Robert...PP has been sent for the air cleaner,thanks Carlos

Payment received. I will get it sent tomorrow on my lunch break. Thank you!

bobbo · 01-18-2011, 08:45 AM

Also have a pair of sbc chrome valve covers with chrome breather. They have some scratches. The valve cover not pictured does have PCV grommet. Will also include the long t-handle bolts and studs and chrome hold downs. Will get some better pics this evening and post. Will take $20 plus shipping.

bobbo · 01-19-2011, 09:46 AM

Quote:

Originally Posted by kiknrocks

ill get in line for the ram horns in the second pics shipped to 95240 Thanks

You are up on the manifolds, Cyclone44 has passed. I spoke with the lady at the Fedex store regarding shipping, the quote I had for Cyclone44 was without packaging, was told to figure around 35-40 for shipping once packaged. If it is less, I will refund the difference. So we will go on the high end just to cover it. $60 to your door with the possibility of a refund, if it is more i will cover it.

m6z · 01-19-2011, 10:37 AM

Next in line on the better pair of ram horns.

bobbo · 01-19-2011, 02:57 PM

you are up next...

bobbo · 01-19-2011, 09:56 PM

So how do you guys ship larger items? I have a couple of quotes for shipping the exhaust manifolds but thinking the prices are too high...Fedex quoted me $35 to $40...USPS is $102!!
I just want to fund my current project by selling my old.

kiknrocks · 01-20-2011, 03:25 AM

Ill pass on the ram horns, found some locally. Thanks
Posted via Mobile Device

01-16-2011, 07:57 PM	#1
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Misc parts for sale Selling some smaller parts to fund the project. These are all off my 69 GMC. Replies MUST be done on this thread initially, NO PM's will be responded to if you haven't posted interest here first. Here's what I have... Dash Cluster with aftermarket oil, temp, volts gauges. All works. --- $40 plus shipping. Heater Control, all new parts, switch, levers. Comes with cables but they are tight. --- $35 plus shipping. Attached Images __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE! Last edited by bobbo; 01-18-2011 at 09:51 PM.

01-16-2011, 08:04 PM	#2
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: Misc parts for sale Edelbrock Performer RPM intake for SBC, this was on my 350. SOLD! Edelbrock Performer 600 Carburetor - SOLD! Edelbrock Air Cleaner - SOLD! Attached Images __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE! Last edited by bobbo; 01-17-2011 at 06:56 PM.

01-16-2011, 08:12 PM	#3
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: Misc parts for sale Two sets of SBC Ram Horn manifolds, the first two pics are the set I had on the truck, the flanges are very rough, studs are welded into the manifolds and flange nuts are lightly welded to studs. Will take $10 plus shipping for the pair. Second set is not matching but good condition. SOLD! Also interested in selling the wheels, They are 16" 6 lug chrome, 8 inches wide, include center caps and tires. Firestone Destination 265/75R16. I will not ship these, will need local pick up only. $350 firm Attached Images __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE! Last edited by bobbo; 01-20-2011 at 02:13 PM.

01-16-2011, 08:38 PM	#4
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: Misc parts for sale Bobbo, would you take $100.00 for the carb and intake picked up? I can come this weekend or the following. __________________ -Scott-

01-16-2011, 08:41 PM	#5
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Misc parts for sale do you have a good ram horn for the pass side....One that the studs would come out of so new ones could be put in?....That is a great deal on that carb!!

01-16-2011, 08:48 PM	#9
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: Misc parts for sale LOL. My gf would like that too much. Will consider them sold then. Let me know which weekend, I work next Saturday and am off Sunday, the following weekend I am off both days. __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE!

01-16-2011, 08:51 PM	#10
sjarrett71 Registered User Join Date: Dec 2006 Location: Rolla, MO Posts: 2,463	Re: Misc parts for sale Lets make it the following weekend then. It would be a rush trip for this coming weekend since I work both days at my part time job. __________________ -Scott-

01-16-2011, 08:53 PM	#11
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: Misc parts for sale Awesome! Really excited. __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE!

01-16-2011, 09:52 PM	#12
Cyclone44 Step Brother Join Date: Sep 2007 Location: K-town Posts: 4,029	Re: Misc parts for sale Do you have a idea what shipping to 37918 would be?....They are kinda heavy!

01-17-2011, 12:14 AM	#14
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: Misc parts for sale I'll take the air cleaner if still up for grabs....pm me for payment info, thanks __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

01-17-2011, 04:51 AM	#15
kiknrocks 65 Chevy Join Date: Nov 2009 Location: LODI Ca Posts: 144	Re: Misc parts for sale ill get in line for the ram horns in the second pics shipped to 95240 Thanks

01-17-2011, 05:09 PM	#18
clos69 Its Topless Season!!!! Join Date: Jul 2007 Location: fort worth, tx Posts: 1,657	Re: Misc parts for sale Robert...PP has been sent for the air cleaner,thanks Carlos __________________ -Carlos- The of America *1967 SWB Custom C-10* *(Celeste)* Join the *Patina Club*

01-18-2011, 08:45 AM	#20
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: Misc parts for sale Also have a pair of sbc chrome valve covers with chrome breather. They have some scratches. The valve cover not pictured does have PCV grommet. Will also include the long t-handle bolts and studs and chrome hold downs. Will get some better pics this evening and post. Will take $20 plus shipping. Attached Images __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE! Last edited by bobbo; 01-18-2011 at 09:50 PM.

01-19-2011, 10:37 AM	#22
m6z Registered User Join Date: Aug 2008 Location: Pittsburg, KS Posts: 2,466	Re: Misc parts for sale Next in line on the better pair of ram horns. __________________ Doug Looking for a 67-72 short bed driver.....

01-19-2011, 02:57 PM	#23
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: Misc parts for sale you are up next... __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE!



Register or Log In To remove these advertisements.

01-19-2011, 09:56 PM	#24
bobbo Droppin' It Like It's Hot! Join Date: Jun 2007 Location: Battlefield, Missouri Posts: 2,934	Re: Misc parts for sale So how do you guys ship larger items? I have a couple of quotes for shipping the exhaust manifolds but thinking the prices are too high...Fedex quoted me $35 to $40...USPS is $102!! I just want to fund my current project by selling my old. __________________ Robert Life Member RIP CAROL JANICE HARTMAN. BELOVED MOTHER. 01/04/53 - 03/05/09 1969 1500 Norwood, MO 2007 Big Sandy, TN 2008 Had nothing to do with the forklift! Kirkwood, MO (Midwest Meet 2009) Midwest All Truck Nationals, KCMO - 2008 - 2009 - 2010 - 2012 - 2014 SUPPORT THE SITE HERE! Last edited by bobbo; 01-19-2011 at 09:59 PM.

01-20-2011, 03:25 AM	#25
kiknrocks 65 Chevy Join Date: Nov 2009 Location: LODI Ca Posts: 144	Re: Misc parts for sale Ill pass on the ram horns, found some locally. Thanks Posted via Mobile Device

Register or Log In To remove these advertisements.