CA "Part or not to Part" - The 1947 - Present Chevrolet & GMC Truck Message Board Network

perro13 · 09-22-2013, 07:37 PM

Just picked this up yesterday, debating if I should part or sell complete. 3/4 auto, 283,runs, nice doors no holes rust, fenders, tailgate nice
Parts that are for sale.
Tailgate $175
Steering wheel $175
sail trim $80

cru_zn_29 · 09-22-2013, 08:05 PM

If you part it. I need a nice deluxe choke knob.
Thanks Kenny

T Smith · 09-22-2013, 08:26 PM

In on the steering wheel if the price is right!

I'll pass at $175

**ChiefRocka** · 09-22-2013, 08:33 PM

Second on the Steering wheel ...

And mabey some white fenders !!?!??!

Sizemore 65 · 09-22-2013, 08:55 PM

I would like to have the tailgate.

duallyjams · 09-22-2013, 09:50 PM

If it were me I would become a hoarder, with that said if you part it Interested in the manual choke cable assembly if it is in working condition.

Joemomma1 · 09-22-2013, 11:32 PM

To answer what you asked not "what do you want from this truck", I would say that a longbed small window 3/4 ton would not bring in what you can get in parts. Seeing as how it does have a few nice options, rest in scrap. Over here thats what I would do. That wheel sells between $200-$300, fenders at least what repop goes for since it GM metal, trim, tailgate etc. You would have your $800 back in no time.

ClemsonChevy · 09-22-2013, 11:55 PM

I'm interested in: entire set of emergency brake cables and hangers if its a shortbed, speedometer cable, front turnsignal bezels and screws, passenger wiper arm and blade, drivers inner door handle and window crank with clips. Drivers door panel and hardware. Possibly interested in: sun visors and drivers window regulator.

yellowGT · 09-23-2013, 12:34 AM

I want the trim on driver door, inside door handles and window cranks, all the knobs on the cluster light switch and whatever the knobs attach to too.

yellowGT · 09-23-2013, 12:36 AM

Thats if u decide to part

yellowGT · 09-23-2013, 12:37 AM

Sail trims too.

yellowGT · 09-23-2013, 12:39 AM

Lol....I should just buy the whole truck.

Also need the front bumper if you wanna ship to tx.

Need the headlight bezels with lights

westcoast5 · 09-23-2013, 12:58 AM

well if you decide to part I'll take the deluex heater controls, the interior door grab handles and the license plates (assumeing they are dmv clear)

**1966shortwide** · 09-23-2013, 10:49 AM

how much for the two front fender's shipped to 67530, if you part it ??????

McCoyAZ · 09-23-2013, 03:34 PM

I would consider buying both the interior door panels assuming they were drilled for the arm rests. 86409 zip code

**TJ's Chevy** · 09-23-2013, 05:38 PM

Quote:

Originally Posted by perro13

Just picked this up yesterday, debating if I should part or sell complete. 3/4 auto, 283,runs, nice doors no holes rust, fenders, tailgate nice

How much for the custom cab emblems behind the door? If you are parting it out.

**TJ's Chevy** · 09-23-2013, 05:39 PM

Also interested in the front window chrome strip. Thanks. T.J.

TommyDuncan · 09-23-2013, 06:19 PM

Put me in line for drivers door trim. I just need the top part. I have a GMC...
Posted via Mobile Device

burbluv · 09-23-2013, 06:35 PM

Hey Randy,
If the plates look good and are usable which I would need to check with DMV I am interested based on price.
Thanks,
AJ

USMilitary · 09-23-2013, 06:41 PM

Quote:

Originally Posted by yellowGT

I want the trim on driver door, inside door handles and window cranks, all the knobs on the cluster light switch and whatever the knobs attach to too.

I have the inside door handles, window cranks, front bumper and sail trim. I should also have some driver trim pieces. If he doesn't break it up.
Posted via Mobile Device

USMilitary · 09-23-2013, 06:43 PM

Quote:

Originally Posted by TommyDuncan

Put me in line for drivers door trim. I just need the top part. I have a GMC...
Posted via Mobile Device

I may have the piece you are looking for, if he doesn't part it out.
Posted via Mobile Device

C/10 King · 09-23-2013, 07:31 PM

Perro, If you get to me?.....and I'll wait my turn.

Prices on radio delete, lighter, visors and possibly the seat (depending on condition).

perro13 · 09-23-2013, 08:22 PM

Truck Sold
Some parts off truck for sale
Tailgate 175
Steering wheel $175
sail trim $80

perro13 · 09-23-2013, 08:27 PM

Quote:

Originally Posted by yellowGT

Sail trims too.

sail trim $80
inside door handles and window cranks $20
shipping $16
Should have knobs too, i'll take a look

perro13 · 09-23-2013, 08:30 PM

Quote:

Originally Posted by T.J. MCCAULEY

Also interested in the front window chrome strip. Thanks. T.J.

Sail trim $80 3 pairs
windshield trim with clips $80 I have like 3 sets

09-22-2013, 07:37 PM	#1
perro13 Registered User Join Date: Dec 2008 Location: Stockton CA Posts: 2,364	"Part or not to Part" Truck Sold some parts for sale off of truck Just picked this up yesterday, debating if I should part or sell complete. 3/4 auto, 283,runs, nice doors no holes rust, fenders, tailgate nice Parts that are for sale. Tailgate $175 Steering wheel $175 sail trim $80 Last edited by perro13; 09-23-2013 at 08:23 PM. Reason: Changing title

09-22-2013, 08:05 PM	#2
cru_zn_29 Registered User Join Date: Feb 2011 Location: Joshua Tree Ca. Posts: 719	Re: "Part or not to Part" If you part it. I need a nice deluxe choke knob. Thanks Kenny

09-22-2013, 08:26 PM	#3
T Smith Registered User Join Date: Jan 2011 Location: Vicksburg, Mississippi Posts: 567	Re: "Part or not to Part" In on the steering wheel if the price is right! I'll pass at $175 Last edited by T Smith; 09-24-2013 at 07:50 AM. Reason: add comment

09-22-2013, 08:33 PM	#4
ChiefRocka Hollister, CA. Join Date: Sep 2006 Location: Hollister, Ca. Posts: 6,147	Re: "Part or not to Part" Second on the Steering wheel ... And mabey some white fenders !!?!??! __________________ John What the Heck is that ?? CURRENT BUILDS: 62 BurbMaster Other Builds: My '63 C-10,LWB,CC,BBW '06 HD StrAight Axle Swap Father/Son '67 C-20, LQ9,4L80,Bagged,8-Lugger !!Good Friend Richard's Build AMERICAN CUSTOMS & CLASSICS (831) 630-1965 www.ACCHOLLISTER.com ACC on FACEBOOK "Rest in Peace, Mom & Dad ... I will see you again someday!"

09-22-2013, 08:55 PM	#5
Sizemore 65 Registered User Join Date: Apr 2010 Location: Johnson City TN Posts: 66	Re: "Part or not to Part" I would like to have the tailgate.

09-22-2013, 09:50 PM	#6
duallyjams Registered User Join Date: May 2007 Location: Deale Md Posts: 4,663	Re: "Part or not to Part" If it were me I would become a hoarder, with that said if you part it Interested in the manual choke cable assembly if it is in working condition. __________________ James 63 GMC V6 4speed carryall 65 chevy swb bbw V8 auto 68 K20 327/4 speed, buddy buckets 2002 GMC CC Dually Duramax 64 GMC lwb 3/4 V6 4speed SOLD 66 GMC swb bbw buddy buckets SOLD IG duallyjams The only thing that stays the same is constant change!

09-22-2013, 11:32 PM	#7
Joemomma1 Registered User Join Date: Mar 2009 Location: CA Posts: 812	Re: "Part or not to Part" To answer what you asked not "what do you want from this truck", I would say that a longbed small window 3/4 ton would not bring in what you can get in parts. Seeing as how it does have a few nice options, rest in scrap. Over here thats what I would do. That wheel sells between $200-$300, fenders at least what repop goes for since it GM metal, trim, tailgate etc. You would have your $800 back in no time.

09-22-2013, 11:55 PM	#8
ClemsonChevy 8 vehicles only 4 that run Join Date: Feb 2006 Location: Clemson, SC Posts: 236	Re: "Part or not to Part" I'm interested in: entire set of emergency brake cables and hangers if its a shortbed, speedometer cable, front turnsignal bezels and screws, passenger wiper arm and blade, drivers inner door handle and window crank with clips. Drivers door panel and hardware. Possibly interested in: sun visors and drivers window regulator. __________________ 95 2500 350 w/ 3.73 72 GMC 1500 SWB stepside 65 Chevy C10 SWB stepside 72 Chevy C10 LWB fleetside Last edited by ClemsonChevy; 09-23-2013 at 12:07 AM.

09-23-2013, 12:34 AM	#9
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: "Part or not to Part" I want the trim on driver door, inside door handles and window cranks, all the knobs on the cluster light switch and whatever the knobs attach to too. __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

09-23-2013, 12:36 AM	#10
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: "Part or not to Part" Thats if u decide to part __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

09-23-2013, 12:37 AM	#11
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: "Part or not to Part" Sail trims too. __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

09-23-2013, 12:39 AM	#12
yellowGT Registered User Join Date: Jan 2006 Location: Garland, TX Posts: 970	Re: "Part or not to Part" Lol....I should just buy the whole truck. Also need the front bumper if you wanna ship to tx. Need the headlight bezels with lights __________________ '84 swb chevy '69 swb chevy '68 swb chevy '95 Impala ss-sold '89 chevy crew cab dually 3+3

09-23-2013, 12:58 AM	#13
westcoast5 Registered User Join Date: Jul 2012 Location: salinas,ca Posts: 296	Re: "Part or not to Part" well if you decide to part I'll take the deluex heater controls, the interior door grab handles and the license plates (assumeing they are dmv clear) __________________ *Bryan* 1966 SWB BBW "SICKT6" Accuair\|Porterbuilt\|Bodied\|Shaved\|Z'd\|350 with minor goodies\|5 lug\|front disc\|3.73 rear\|CPP power steering/brakes\|few more goodies\| thanks to C10Clubapparel

09-23-2013, 10:49 AM	#14
1966shortwide Senior Member Join Date: Jan 2012 Location: Great bend,ks Posts: 230	Re: "Part or not to Part" how much for the two front fender's shipped to 67530, if you part it ??????

09-23-2013, 03:34 PM	#15
McCoyAZ Registered User Join Date: Aug 2011 Location: Kingman, AZ Posts: 1,574	Re: "Part or not to Part" I would consider buying both the interior door panels assuming they were drilled for the arm rests. 86409 zip code __________________ http://s994.photobucket.com/albums/af62/ScottAz2/



Register or Log In To remove these advertisements.

09-23-2013, 05:39 PM	#17
TJ's Chevy Post Whore Join Date: Mar 2013 Location: Southern Oregon Posts: 10,384	Re: "Part or not to Part" Also interested in the front window chrome strip. Thanks. T.J. __________________ 1966 Chevy C10 "Project Two Tone" http://67-72chevytrucks.com/vboard/s...d.php?t=596643 1964 GMC "Crustine" semi-build:http://67-72chevytrucks.com/vboard/s...d.php?t=665056 My youtube channel. Username "Military Chevy": https://www.youtube.com/channel/UC_h...fzpcUXyK_5-uiw

09-23-2013, 06:19 PM	#18
TommyDuncan Registered User Join Date: Feb 2013 Location: Boulder City NV Posts: 214	Re: "Part or not to Part" Put me in line for drivers door trim. I just need the top part. I have a GMC... Posted via Mobile Device

09-23-2013, 06:35 PM	#19
burbluv Registered User Join Date: Jan 2011 Location: San Ramon California Posts: 325	Re: "Part or not to Part" Hey Randy, If the plates look good and are usable which I would need to check with DMV I am interested based on price. Thanks, AJ

09-23-2013, 07:31 PM	#22
C/10 King Registered User Join Date: Feb 2009 Location: A****er, CA Posts: 5,594	Re: "Part or not to Part" Perro, If you get to me?.....and I'll wait my turn. Prices on radio delete, lighter, visors and possibly the seat (depending on condition). __________________ C/10 Rene 1966 Short Fleet "The Hag" 1967 CST Short Fleet "Dark Poly" 1971 Short Fleet 1970 Jimmy Custom 2 WD "Golden Ticket" 1972 Blazer 2 WD "Retro Blaze"

09-23-2013, 08:22 PM	#23
perro13 Registered User Join Date: Dec 2008 Location: Stockton CA Posts: 2,364	Re: "Part or not to Part" Truck Sold Some parts off truck for sale Tailgate 175 Steering wheel $175 sail trim $80

Register or Log In To remove these advertisements.