|
02-23-2003, 11:06 PM
|
#1 |
|
Registered User
Join Date: Nov 2001
Location: indiana
Posts: 279
|
saggin' rear end !
Well it got you to LOOK !!
On my '70 Jimmy, the previous owner put 3/4 ton leafs in the back and lifted it 3-4 inches. The front is lifted 4" . The right (pass) rear is settng 3/4" - 1 1/4" lower than the other rear side. I took the measurements at the top of the outside wheel well. Obviously the difference is less noticable at the frame..... What is the best (easiest) way to level the ride ! Again, the heights are different at the frame AND the wheel well. Thanks !! 
__________________
'70 jimmy 4x4 '98 chevy zr2 (the misses' transpo) '65 stang '81 shovelhead '99 Dodge Ram 1500 |
|
|
|
02-26-2003, 04:21 PM
|
#2 |
|
Registered User
Join Date: Dec 1999
Location: Austin, TX, USA
Posts: 7,712
|
Have you inspected all of your body mount bushings? Sounds almost like you have two problems. One thing I found with my Camaro when it sat funny was that the FRONT suspension not being right played a big role in the rear.
__________________
44 Willys MB 52 M38A1 64 Corvette Coupe 68 Camaro 'vert LT1 & TH700 69 Z/28 355 12.6's @110 69 Chevy Short Step 4 1/2"/7" drop 72 Jimmy 4WD 4spd 4" & 35's 02 GMC 2500HD 4x4 Duramax |
|
|
|
 |
| Bookmarks |
|
|
Linear Mode
