How about some pics of 67-72 Part II - Page 74 - The 1947 - Present Chevrolet & GMC Truck Message Board Network

**Ol Blue K20** · 07-03-2013, 12:34 PM

Quote:

Originally Posted by dapperg

fresh out the shop! full engine rebuild

Dang!!! I was hoping it was a picture of the shop girl!!!!!!!!!

aclay17 · 07-03-2013, 01:34 PM

Here is my '67 LWB 250 inline with 4 speed.

Name: IMG_1514 (640x480).jpg
Views: 2640
Size: 82.4 KB

Name: IMG_1515 (640x480).jpg
Views: 2643
Size: 77.4 KB

Name: 67 Seat (After).jpg
Views: 2643
Size: 43.4 KB

Name: IMG_1262.jpg
Views: 2658
Size: 50.1 KB

billneumiller · 07-03-2013, 06:03 PM

I appreciate the compliments. Thanks, guys.

Katrina/10 · 07-03-2013, 06:22 PM

Quote:

Originally Posted by aclay17

Here is my '67 LWB 250 inline with 4 speed.

Attachment 1128459

Attachment 1128460

Attachment 1128461

Attachment 1128462

Excellent simplicity

mud.man.rj · 07-03-2013, 09:59 PM

Ok dapperg, that is not a noteworthy engine pic for all the trouble of rebuilding an engine, looks good from...far.

CSGAS · 07-03-2013, 11:19 PM

Well, Florida to

is...far

So I guess it must look good!

*Jases stepside* · 07-03-2013, 11:55 PM

Latest updates....
Posted via Mobile Device
Posted via Mobile Device

*Jases stepside* · 07-03-2013, 11:57 PM

One more
Posted via Mobile Device
Posted via Mobile Device

aclay17 · 07-04-2013, 12:28 AM

Quote:

Originally Posted by Jases stepside

Latest updates....
Posted via Mobile Device
Posted via Mobile Device

And of course your 6cyl makes my not look so good! Looks good nice and clean. I'm just up the road a ways in Allen.

Posted via Mobile Device
Posted via Mobile Device

aclay17 · 07-04-2013, 12:32 AM

Quote:

Originally Posted by Katrina/10

Excellent simplicity

Thank you sir!
Posted via Mobile Device

**Boog** · 07-04-2013, 08:42 AM

Quote:

Originally Posted by billneumiller

Thanks, guys. Measure ten times, order once. If you can go custom, and thank goodness I have credit, you can get the fit damn near perfect–9.5" in front and 11" in back with 275/315 17's. Couldn't be happier.

Here's a couple more shots...

Very nice Bill. I think it falls into a new catagory.
Should we call this the stock plus look?

billneumiller · 07-05-2013, 11:30 AM

Thanks, Boog. That's an interesting idea. I've always liked the look of dog dish caps but I like wide rubber, too. This is what you get I guess.

billneumiller · 07-05-2013, 12:46 PM

I really like the white rallys. Nice!

*Jases stepside* · 07-05-2013, 07:24 PM

Aclay17, just takes time. Mine was fugly when I first got it! Three case of brake cleaner, and a putty knife goes a long way lol. But thanks boss she is my baby
Posted via Mobile Device

dapperg · 07-06-2013, 03:51 PM

Quote:

Originally Posted by Ol Blue K20

Dang!!! I was hoping it was a picture of the shop girl!!!!!!!!!

in the middle!! this pic doesn't even do her justice. she's a looker

dapperg · 07-06-2013, 03:53 PM

here's another

Over the Hill · 07-06-2013, 11:09 PM

We went to check out a car show and got directed into it I was amazed by the amount of interest shown in our Yellow Chevy

ole dollor · 07-07-2013, 12:44 PM

Quote:

Originally Posted by Over the Hill

We went to check out a car show and got directed into it I was amazed by the amount of interest shown in our Yellow Chevy

i can tell you why they were looking at it.....thats a nice truck....

and welcome to the forum from Texas..

Over the Hill · 07-07-2013, 01:55 PM

Quote:

Originally Posted by ole dollor

i can tell you why they were looking at it.....thats a nice truck....

and welcome to the forum from Texas..

Here is a better picture of the truck, just finished swapping out the Dana 44 with drum brakes to a 1987 Dana 60 with disc brakes.

ole dollor · 07-07-2013, 06:11 PM

over the hill : thats a sharp truck, would like to see more pic's. inside and out, how long have you had it, where did it come from..

Over the Hill · 07-07-2013, 07:04 PM

Quote:

Originally Posted by ole dollor

over the hill : thats a sharp truck, would like to see more pic's. inside and out, how long have you had it, where did it come from..

Have had it for a couple of years now was painted yellow when I got it. I have put an Accel Hei super coil on it, I have a MSD 6A digital ignition control but have to fabricate a mounting plate for it. I have a Holley 650 ultra double pumper to put on it as well. My son has picked up some linkage parts and a 700r4 kick down synchronizer when I get those pieces I well install the Holley. The truck has a 30 over 350 and a 700r4, a np 205 transfer case, a Dana 60 front diff and a Eaton 1 ton rear both are 4.10 geared. When I changed the front diff I put on all new tie rods, new calipers, new pads, new upper king pin pivot bushings, a off road design steering block riser(cut the turning radius nearly in half) a Rancho 5000 steering damper. I sand blasted the diff and painted it with Cloverdale DP90 epoxy primer. It has Headers and 3 inch exhaust with Flowmaster 70 series mufflers. I have two engine choices to swap into it next winter a 1970 1/2 LT1 steel crank 2.02 angle plug heads factory windage tray, the works, or a 2009 6.2 litre L92 from a Denali. I'm really fussy and always tinkering I drive it daily in the summer.

ole dollor · 07-07-2013, 07:36 PM

Quote:

Originally Posted by Over the Hill

Have had it for a couple of years now was painted yellow when I got it. I have put an Accel Hei super coil on it, I have a MSD 6A digital ignition control but have to fabricate a mounting plate for it. I have a Holley 650 ultra double pumper to put on it as well. My son has picked up some linkage parts and a 700r4 kick down synchronizer when I get those pieces I well install the Holley. The truck has a 30 over 350 and a 700r4, a np 205 transfer case, a Dana 60 front diff and a Eaton 1 ton rear both are 4.10 geared. When I changed the front diff I put on all new tie rods, new calipers, new pads, new upper king pin pivot bushings, a off road design steering block riser(cut the turning radius nearly in half) a Rancho 5000 steering damper. I sand blasted the diff and painted it with Cloverdale DP90 epoxy primer. It has Headers and 3 inch exhaust with Flowmaster 70 series mufflers. I have two engine choices to swap into it next winter a 1970 1/2 LT1 steel crank 2.02 angle plug heads factory windage tray, the works, or a 2009 6.2 litre L92 from a Denali. I'm really fussy and always tinkering I drive it daily in the summer.

great story....sounds like you have a lot of fun with it, man that is what its all about, the new ls motors are the way to go, kinda wish i had one in mine...cool truck you have there..

70chevroletCST · 07-07-2013, 08:38 PM

My CST/10 (before & after) and Paps C/10.

Longhorn321 · 07-08-2013, 03:50 PM

Quote:

Originally Posted by dapperg

in the middle!! this pic doesn't even do her justice. she's a looker

She's GOTTA be pretty to still look good with those two standing beside her!

**Ol Blue K20** · 07-08-2013, 03:57 PM

Quote:

Originally Posted by dapperg

in the middle!! this pic doesn't even do her justice. she's a looker

I agree she's a looker! and congrats on finally getting your truck back!

07-03-2013, 01:34 PM	#1827
aclay17 Registered User Join Date: May 2010 Location: Atlanta, GA Posts: 127	Re: How about some pics of 67-72 Part II Here is my '67 LWB 250 inline with 4 speed. __________________ '91 Chevy 350 2/4 Drop. '67 Chevy LWB 250 Inline 6 w/4 speed. Southern Classic C-10 Club 2013 Hot Rod Pour Tour

07-03-2013, 06:03 PM	#1828
billneumiller Registered User Join Date: Apr 2013 Location: Minnetonka, MN Posts: 78	Re: How about some pics of 67-72 Part II I appreciate the compliments. Thanks, guys.

07-03-2013, 09:59 PM	#1830
mud.man.rj Registered User Join Date: Dec 2011 Location: Creighton Sask. Canada Posts: 4,121	Re: How about some pics of 67-72 Part II Ok dapperg, that is not a noteworthy engine pic for all the trouble of rebuilding an engine, looks good from...far.

07-03-2013, 11:19 PM	#1831
CSGAS optomistic ah-so Join Date: Mar 2009 Location: Charlotte, NC Posts: 544	Re: How about some pics of 67-72 Part II Well, Florida to is...far So I guess it must look good! __________________ Rubbing is Racin' Ribbing is Bench Racin' 1970 C-10 lwb Fleetside. Originally 350 2-bbl 3-on-the-tree, m/b, m/w, m/s no a/c. Currently running on a '76 Camaro 305. Last edited by CSGAS; 07-03-2013 at 11:26 PM. Reason: I just had to add the flag!

07-03-2013, 11:55 PM	#1832
Jases stepside Account Suspended Join Date: Dec 2012 Location: fort worth texas Posts: 25	Re: How about some pics of 67-72 Part II Latest updates.... Posted via Mobile Device Posted via Mobile Device Attached Images

07-03-2013, 11:57 PM	#1833
Jases stepside Account Suspended Join Date: Dec 2012 Location: fort worth texas Posts: 25	Re: How about some pics of 67-72 Part II One more Posted via Mobile Device Posted via Mobile Device Attached Images

07-05-2013, 11:30 AM	#1837
billneumiller Registered User Join Date: Apr 2013 Location: Minnetonka, MN Posts: 78	Re: How about some pics of 67-72 Part II Thanks, Boog. That's an interesting idea. I've always liked the look of dog dish caps but I like wide rubber, too. This is what you get I guess.

07-05-2013, 12:46 PM	#1838
billneumiller Registered User Join Date: Apr 2013 Location: Minnetonka, MN Posts: 78	Re: How about some pics of 67-72 Part II I really like the white rallys. Nice!

07-05-2013, 07:24 PM	#1839
Jases stepside Account Suspended Join Date: Dec 2012 Location: fort worth texas Posts: 25	Re: How about some pics of 67-72 Part II Aclay17, just takes time. Mine was fugly when I first got it! Three case of brake cleaner, and a putty knife goes a long way lol. But thanks boss she is my baby Posted via Mobile Device

07-06-2013, 03:53 PM	#1841
dapperg Registered User Join Date: Feb 2013 Location: Atlanta, GA Posts: 84	Re: How about some pics of 67-72 Part II here's another Attached Images __________________ . . . . . . . . . ________ . . . . . . __________///____ //_____ /____ 72’ __/_____ /_ ___/ ===( o )=======( o ) . . . . . . . . . . . . . . . . . . . . . . 72' Chevy C10 Super Fleetside Longbed "Speak softly & carry a big pistol."

07-06-2013, 11:09 PM	#1842
Over the Hill Registered User Join Date: Jun 2013 Location: Central Saskatchewan Posts: 3	Re: How about some pics of 67-72 Part II We went to check out a car show and got directed into it I was amazed by the amount of interest shown in our Yellow Chevy Attached Images

07-07-2013, 06:11 PM	#1845
ole dollor Registered User Join Date: May 2012 Location: Anton, Texas Posts: 2,364	Re: How about some pics of 67-72 Part II over the hill : thats a sharp truck, would like to see more pic's. inside and out, how long have you had it, where did it come from..

07-07-2013, 08:38 PM	#1848
70chevroletCST Registered User Join Date: Jan 2012 Location: West Liberty, KY Posts: 47	Re: How about some pics of 67-72 Part II My CST/10 (before & after) and Paps C/10. Attached Images __________________ 1970 Chevrolet CST/10 1968 Chevrolet K/10



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.