Finally! Cage pictures inside... - The 1947 - Present Chevrolet & GMC Truck Message Board Network

redz 1970 K5 · 01-30-2005, 11:55 PM

Tough to take cage pics with the top on, but I did the best I could. Thanks again Alexis, couldn't have done it without you. I will powdercoat it and get some good rollbar padding on it when the top comes off in the spring.

Couldn't be happier!

redz 1970 K5 · 01-30-2005, 11:56 PM

The welder wasn't happy with the spreader up front, so he made his own to spread the bars out! The glove box actually opens!

bouncytruck · 01-31-2005, 12:59 AM

Looks good. I've seen a few trucks where they trimmed the corner off the glove box. Sounds like you found yourself a good resource down there...

Alexis · 01-31-2005, 01:01 AM

I was going to PM you to see if you ever got it installed. Looks awesome. just wait till you get the top off and go cruzing.

cheyenne10 · 01-31-2005, 01:48 AM

I think this should make everyone riding feel more secure. I've seen rollovers in these removeable top rigs before, often flattened to the top of the bed. I'm getting to old and big to squish down that low anymore. Very nice setup. Smittybuilt always made good products. Someday I may share pics of a Ford with similar setup.

**FRENCHBLUE72** · 02-05-2005, 08:27 PM

That does look pretty damn good. Nice job.

01-30-2005, 11:55 PM	#1
redz 1970 K5 OBS guy Join Date: Jun 2004 Location: SoCal Posts: 1,060	Finally! Cage pictures inside... Tough to take cage pics with the top on, but I did the best I could. Thanks again Alexis, couldn't have done it without you. I will powdercoat it and get some good rollbar padding on it when the top comes off in the spring. Couldn't be happier! __________________ 88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more

01-30-2005, 11:56 PM	#2
redz 1970 K5 OBS guy Join Date: Jun 2004 Location: SoCal Posts: 1,060	The welder wasn't happy with the spreader up front, so he made his own to spread the bars out! The glove box actually opens! __________________ 88 Suburban Goodies- Alpine, Auto Meter, BDS, Bilstein, B&M, BFG, Borgeson, Bushwhacker, Cowl hood, Flowmaster, Genuine Gear, Holley, Infinity, JVC, K&N, MB Wheels, MSD, Pioneer, Skyjacker, Sony, Thorley, Walker + more

01-31-2005, 12:59 AM	#3
bouncytruck SKINNY TIRES RULE! Join Date: Sep 2001 Location: Bothell, WA Posts: 11,049	Looks good. I've seen a few trucks where they trimmed the corner off the glove box. Sounds like you found yourself a good resource down there... __________________ bouncytruck 1972 K5 The Hauler 1994 K1500 Suburban The Daily2010 Kia Soul Wife's Ride2014 Fiat 500L

01-31-2005, 01:01 AM	#4
Alexis Member since 2000 Join Date: Dec 2000 Location: Mountain View Ca / Mexico Posts: 7,879	badass!!! I was going to PM you to see if you ever got it installed. Looks awesome. just wait till you get the top off and go cruzing. Last edited by Alexis; 01-31-2005 at 01:09 AM.

01-31-2005, 01:48 AM	#5
cheyenne10 Senior Member Join Date: Apr 2000 Location: Oregon Posts: 2,511	neck insurance!! I think this should make everyone riding feel more secure. I've seen rollovers in these removeable top rigs before, often flattened to the top of the bed. I'm getting to old and big to squish down that low anymore. Very nice setup. Smittybuilt always made good products. Someday I may share pics of a Ford with similar setup. __________________ Bob

02-05-2005, 08:27 PM	#6
FRENCHBLUE72 PROJECT 7DEUCE Join Date: Dec 2002 Location: GRANTS PASS OR Posts: 21,590	That does look pretty damn good. Nice job. __________________ GO BIG GREEN GO DUCKS MEMBER #6377 72 k-5 daily driver 6'' lift 35'' 350-350-205 slowly getting rust free. Project "7DEUCE" check out my build http://67-72chevytrucks.com/vboard/s...d.php?t=267665 Tim Powell..R.I.P EastSideLowlife..... R.I.P..



Register or Log In To remove these advertisements.

Register or Log In To remove these advertisements.